TCPClient客户端
/* FreeRTOS includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"
/* FreeRTOS+TCP includes. */
#include "FreeRTOS_IP.h"
#include "FreeRTOS_Sockets.h"
#include "TCPClient.h"
#include <stdio.h>
#define config_SERVER_ADDR0 192
#define config_SERVER_ADDR1 168
#define config_SERVER_ADDR2 31
#define config_SERVER_ADDR3 144
// 服务器端口
#define SERVER_PORT ( 8088 )
// 缓存大小
#define BUFFER_SIZES ( ipconfigTCP_MSS * 2 )
// 发送和接收超时时间
static const TickType_t xReceiveTimeOut = pdMS_TO_TICKS( 2000 ); // 默认为5000ms
static const TickType_t xSendTimeOut = pdMS_TO_TICKS( 1000 ); // 默认为5000ms
// 发送和接收缓存区
static char cTxBuffers[ BUFFER_SIZES ], cRxBuffers[ BUFFER_SIZES ];
// 连接服务器的Socket
static Socket_t xSocket;
uint8_t tcp_send = 1;
uint8_t isConnet = 0;
uint8_t getisConnet(void)
{
return isConnet;
}
static void prvClientSendTask(void *pvParameters)
{
struct freertos_sockaddr xServerAdd;// 服务器地址
uint8_t retrycount = 0; // 重连次数
BaseType_t sendbytelen; // 发送字节数
char * pcSendString = cTxBuffers; // 发送缓存地址
char * pcRecvString = cRxBuffers; // 接收缓存地址
uint32_t uTxCount = 0; // 发送次数自增
// 填充 服务器地址和端口
xServerAdd.sin_port = FreeRTOS_htons(SERVER_PORT);
xServerAdd.sin_addr = FreeRTOS_inet_addr_quick(config_SERVER_ADDR0, config_SERVER_ADDR1, config_SERVER_ADDR2, config_SERVER_ADDR3);
while(1)
{
xSocket = FreeRTOS_socket(FREERTOS_AF_INET, FREERTOS_SOCK_STREAM, FREERTOS_IPPROTO_TCP);
configASSERT(xSocket != FREERTOS_INVALID_SOCKET);
// 设置接收、发送超时
FreeRTOS_setsockopt(xSocket, 0, FREERTOS_SO_RCVTIMEO, &xReceiveTimeOut, sizeof(xReceiveTimeOut));
FreeRTOS_setsockopt(xSocket, 0, FREERTOS_SO_SNDTIMEO, &xSendTimeOut, sizeof(xSendTimeOut));
// if ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND is set to 1 in FreeRTOSIPConfig.h
// 不需要bind
// 连接成功 返回0
if(FreeRTOS_connect(xSocket, &xServerAdd, sizeof(xServerAdd)) == 0)
{
isConnet = 1;
retrycount = 0;
while(1)
{
if(tcp_send)
{
memset(pcSendString, 0, sizeof(cTxBuffers));
sprintf(pcSendString, "tcpclient message number %u \r\n", uTxCount++);
sendbytelen = FreeRTOS_send(xSocket, pcSendString, strlen(pcSendString), 0);
// 发送错误
if(sendbytelen < 0)
{
switch(sendbytelen)
{
case -pdFREERTOS_ERRNO_ENOTCONN:
// 套接字已关闭或已关闭而无法发送数据
break;
case -pdFREERTOS_ERRNO_ENOMEM:
// 内存不足而无法发送数据
break;
case -pdFREERTOS_ERRNO_EINVAL:
// xSocket不是有效的TCP套接字而无法发送数据
break;
case -pdFREERTOS_ERRNO_ENOSPC:
// 在任何数据被发送之前发生超时
break;
}
break;
}
if(sendbytelen == 0)
{
break;
}
}
vTaskDelay(20 / portTICK_PERIOD_MS);
}
// 当重复发送失败
if(FreeRTOS_issocketconnected(xSocket))
{
// 优雅的关闭断开连接: FIN, FIN+ACK, ACK.
FreeRTOS_shutdown(xSocket, FREERTOS_SHUT_RDWR);
// 期望FreeRTOS_recv()立刻返回error，表示shutdown完成
BaseType_t xReturn;
TickType_t xTimeOnEnting = xTaskGetTickCount();// 记录进入接收的时间
// 接收到的数据长度小于0或者超时，则shutdown完成跳出循环
do{
xReturn = FreeRTOS_recv(xSocket, pcRecvString, BUFFER_SIZES, 0);
}
while((xReturn >= 0) && ((xTaskGetTickCount() - xTimeOnEnting) < xReceiveTimeOut));
}
}
retrycount++; // 重连次数自增
FreeRTOS_closesocket(xSocket); // 关闭套接字
vTaskDelay(500 / portTICK_PERIOD_MS); // 延时500ms重连
}
}
void shoutDownTCPClient()
{
char * pcRecvString = cRxBuffers; // 接收缓存地址
if(FreeRTOS_issocketconnected(xSocket))
{
// 优雅的关闭断开连接: FIN, FIN+ACK, ACK.
FreeRTOS_shutdown(xSocket, FREERTOS_SHUT_RDWR);
// 期望FreeRTOS_recv()立刻返回error，表示shutdown完成
BaseType_t xReturn;
TickType_t xTimeOnEnting = xTaskGetTickCount();// 记录进入接收的时间
// 接收到的数据长度小于0或者超时，则shutdown完成跳出循环
do{
xReturn = FreeRTOS_recv(xSocket, pcRecvString, BUFFER_SIZES, 0);
}
while((xReturn >= 0) && ((xTaskGetTickCount() - xTimeOnEnting) < xReceiveTimeOut));
}
}
void stopTCPClient(void)
{
tcp_send = 0;
}
void startTCPClient(void)
{
tcp_send = 1;
}
static void prvClientRecvTask(void *pvParameters)
{
// char * pcTransmittedString = cTxBuffers; // 发送内存指针
char * pcReceivedString = cRxBuffers; // 接收内存指针
// BaseType_t lTransmitted; // 发送字节数
BaseType_t xReturned; // 接收到的数据长度
while(1)
{
if(FreeRTOS_issocketconnected(xSocket))
{
xReturned = FreeRTOS_recv( xSocket, /* The socket being received from. */
( void * )pcReceivedString, /* The buffer into which the received data will be written. */
BUFFER_SIZES, /* The size of the buffer provided to receive the data. */
0 );
// 当收到数据大于0时，返回接收到的数据
if(xReturned > 0)
{
if(memcmp(pcReceivedString, "stop", 4) == 0)
{
tcp_send = 0;
}
else if(memcmp(pcReceivedString, "start", 5) == 0)
{
tcp_send = 1;
}
FreeRTOS_send( xSocket, /* The socket being sent to. */
( void * ) pcReceivedString, /* The data being sent. */
xReturned, /* The length of the data being sent. */
0 );
}
else if(xReturned < 0)
{
/* Error? */
switch(xReturned)
{
case -pdFREERTOS_ERRNO_ENOTCONN:
// 套接字已关闭或已关闭
break;
case -pdFREERTOS_ERRNO_ENOMEM:
// 没有足够的内存使套接字能够创建Rx或Tx流
break;
case -pdFREERTOS_ERRNO_EINTR:
// 套接字收到信号，导致读取操作中止
break;
case -pdFREERTOS_ERRNO_EINVAL:
// 套接字无效，不是TCP套接字，或者未绑定
break;
}
break;
}
}
else
{
vTaskDelay( 1000 / portTICK_PERIOD_MS );
}
}
vTaskDelete(NULL);
}
// TCPClient 客户端任务创建
void vStartTCPClientTasks( uint16_t usTaskStackSize, UBaseType_t uxTaskPriority )
{
xTaskCreate( prvClientSendTask, /* The function that implements the task. */
"ClientTranslate", /* Just a text name for the task to aid debugging. */
usTaskStackSize, /* The stack size is defined in FreeRTOSIPConfig.h. */
NULL, /* The task parameter, not used in this case. */
uxTaskPriority, /* The priority assigned to the task is defined in FreeRTOSConfig.h. */
NULL ); /* The task handle is not used. */
xTaskCreate( prvClientRecvTask, /* The function that implements the task. */
"ClientRecv", /* Just a text name for the task to aid debugging. */
usTaskStackSize, /* The stack size is defined in FreeRTOSIPConfig.h. */
NULL, /* The task parameter, not used in this case. */
uxTaskPriority, /* The priority assigned to the task is defined in FreeRTOSConfig.h. */
NULL ); /* The task handle is not used. */
}
5409
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
