STM32：Custom HID实现USB双向通信

本文章主要讲了使用STM32的USB Device，实现控制板和电脑通信功能。从而实现，上位机对控制板进行调试。

USB Device可以有多种类型，实现双向通信的话，推荐使用Custom HID类型。

首先使用STM32CubeMx实现功能引脚配置并且生成对应的工程文件。

 

Middleware设置USB_DEVICE

 

 配置时钟，USB设置为48MHz。

 生成驱动代码和工程：

生成的代码还有点问题，修改对应的CUSTOM_HID_ReportDesc_FS。 

/** Usb HID report descriptor. */
__ALIGN_BEGIN static uint8_t CUSTOM_HID_ReportDesc_FS[USBD_CUSTOM_HID_REPORT_DESC_SIZE] __ALIGN_END =
{
    /* USER CODE BEGIN 0 */
    0x06,0xFF,0x00,     // USAGE_PAGE (Vendor Page: 0xFF00) ±íʾһ¸ö±¨ÎıêÇ©Ö®ÀàµÄÓÃ;ÀàÒ³
    0x09,0x01,          // USAGE (Vendor Usage 1) ±íʾһ¸ö±¨¸æID±êÖ¾
    0xA1,0x01,          // COLLECTION (Application) ±íʾӦÓü¯ºÏ£¬ÒªÒÔÏÂÃæ×îºóµÄ0xc0½áÊøËü
    0x15,0x00,          // LOGICAL_MINIMUM (0) ±íʾÿ¸ö´«ÊäÊý¾ÝÏÞ¶¨Îª0
    0x26,0xFF,0x00,     // LOGICAL_MAXIMUM (255) ±íʾÿ¸ö´«ÊäÊý¾ÝµÄ×î´óÖµÏÞ¶¨Îª255
    0x75,0x08,          // REPORT_SIZE (8) ´«Êä×ֶεĿí¶ÈΪ8bit£¬±íʾÿ¸ö´«ÊäµÄÊý¾Ý·¶Î§Îª0~ffff ffff
    0x95,0x40,          // REPORT_COUNT (64)ÿ´Î·¢Ë͵ÄÊý¾Ý³¤¶È£¬ÕâÀïÊÇ64λ
    0x09,0x02,          // USAGE (Vendor Usage 2) ±íʾһ¸ö±¨¸æID±êÖ¾
    0x81,0x02,          // INPUT (Data,Var,Abs) ±íʾUSBÒªÊäÈëÊý¾Ýµ½PCµÄ¹¦ÄÜ
    0x09,0x03,          // USAGE (Vendor Usage 3) ±íʾһ¸ö±¨¸æID±êÖ¾
    0x91,0x02,          // OUTPUT (Data,Var,Abs) ±íʾUSBÉ豸Ҫ½ÓÊÕPCµÄÊý¾ÝµÄ¹¦ÄÜ
    0x0A,0x00,0xFF,     // UsageS(0xFF00)
    0x0B1,0x02,         // feature (data, variable, absolute)
    /* USER CODE END 0 */
    0xC0                  // END_COLLECTION ½áÊø±êÖ¾

};

 配置数据长度：

/*---------- -----------*/
#define USBD_MAX_NUM_INTERFACES     1U
/*---------- -----------*/
#define USBD_MAX_NUM_CONFIGURATION     1U
/*---------- -----------*/
#define USBD_MAX_STR_DESC_SIZ     512U
/*---------- -----------*/
#define USBD_DEBUG_LEVEL     0U
/*---------- -----------*/
#define USBD_LPM_ENABLED     1U
/*---------- -----------*/
#define USBD_SELF_POWERED     1U
/*---------- -----------*/
#define USBD_CUSTOMHID_OUTREPORT_BUF_SIZE     64U
/*---------- -----------*/
#define USBD_CUSTOM_HID_REPORT_DESC_SIZE     30U
/*---------- -----------*/
#define CUSTOM_HID_FS_BINTERVAL     0x1U

 usbd_customhid.c

#define CUSTOM_HID_EPIN_ADDR                         0x81U
#define CUSTOM_HID_EPIN_SIZE                         0x40U

#define CUSTOM_HID_EPOUT_ADDR                        0x02U
#define CUSTOM_HID_EPOUT_SIZE                        0x40U

#define USB_CUSTOM_HID_CONFIG_DESC_SIZ               41U
#define USB_CUSTOM_HID_DESC_SIZ                      9U

#ifndef CUSTOM_HID_HS_BINTERVAL
#define CUSTOM_HID_HS_BINTERVAL                      0x05U
#endif /* CUSTOM_HID_HS_BINTERVAL */

#ifndef CUSTOM_HID_FS_BINTERVAL
#define CUSTOM_HID_FS_BINTERVAL                      0x05U
#endif /* CUSTOM_HID_FS_BINTERVAL */

#ifndef USBD_CUSTOMHID_OUTREPORT_BUF_SIZE
#define USBD_CUSTOMHID_OUTREPORT_BUF_SIZE            0x64U
#endif /* USBD_CUSTOMHID_OUTREPORT_BUF_SIZE */

#ifndef USBD_CUSTOM_HID_REPORT_DESC_SIZE
#define USBD_CUSTOM_HID_REPORT_DESC_SIZE             30U
#endif /* USBD_CUSTOM_HID_REPORT_DESC_SIZE */

#define CUSTOM_HID_DESCRIPTOR_TYPE                   0x21U
#define CUSTOM_HID_REPORT_DESC                       0x22U

#define CUSTOM_HID_REQ_SET_PROTOCOL                  0x0BU
#define CUSTOM_HID_REQ_GET_PROTOCOL                  0x03U

#define CUSTOM_HID_REQ_SET_IDLE                      0x0AU
#define CUSTOM_HID_REQ_GET_IDLE                      0x02U

#define CUSTOM_HID_REQ_SET_REPORT                    0x09U
#define CUSTOM_HID_REQ_GET_REPORT                    0x01U

 

 

#include "usb_device.h"
#include "usbd_core.h"
#include "usbd_desc.h"
#include "usbd_customhid.h"
#include "usbd_custom_hid_if.h"
#include "usart.h"

/* USER CODE BEGIN Includes */

unsigned char USB_Send_Buffer[64] = {0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc};
unsigned char USB_Recive_Buffer[64] = {1,2,3,4,5,6,7,8,9,}; //USB½ÓÊÕ»º´æ
unsigned char USB_Received_Count = 0;//USB½ÓÊÕÊý¾Ý¼ÆÊý

/* USER CODE END Includes */

/* USER CODE BEGIN PV */
/* Private variables ---------------------------------------------------------*/

/* USER CODE END PV */

/* USER CODE BEGIN PFP */
/* Private function prototypes -----------------------------------------------*/

/* USER CODE END PFP */

/* USB Device Core handle declaration. */
USBD_HandleTypeDef hUsbDeviceFS;

/*
 * -- Insert your variables declaration here --
 */
/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/*
 * -- Insert your external function declaration here --
 */
/* USER CODE BEGIN 1 */

/* USER CODE END 1 */

/**
  * Init USB device Library, add supported class and start the library
  * @retval None
  */
void MX_USB_DEVICE_Init(void)
{
  /* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */
  /* USER CODE END USB_DEVICE_Init_PreTreatment */

  /* Init Device Library, add supported class and start the library. */
  if (USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS) != USBD_OK)
  {
    Error_Handler();
  }
  if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_CUSTOM_HID) != USBD_OK)
  {
    Error_Handler();
  }
  if (USBD_CUSTOM_HID_RegisterInterface(&hUsbDeviceFS, &USBD_CustomHID_fops_FS) != USBD_OK)
  {
    Error_Handler();
  }
  if (USBD_Start(&hUsbDeviceFS) != USBD_OK)
  {
    Error_Handler();
  }

  /* USER CODE BEGIN USB_DEVICE_Init_PostTreatment */

  /* USER CODE END USB_DEVICE_Init_PostTreatment */
}

void Usbd_Send_Test(void)
{

    Usart_Printf("USBD_CUSTOM_HID_SendReport!\r\n");
    USBD_CUSTOM_HID_SendReport(&hUsbDeviceFS, USB_Send_Buffer, 64);
}

void Usbd_Receive_Test(void)
{
    Usart_Printf("\r\nUsbd_Receive_Test:\r\n");
    for(int i = 0; i < 64; i++)
    {
        Usart_Printf("%02x", USB_Recive_Buffer[i]);
    }
}

 发送测试：

 

 接收测试：