ASAM_XCP_Part2-Protocol-Layer-Specification_V1.0.0文档
Error | Code | Description | Severity |
ERR_CMD_BUSY | 0x10 | Command was not executed. | S2 |
ERR_DAQ_ACTIVE | 0x11 | Command rejected because DAQ is running. | S2 |
ERR_PGM_ACTIVE | 0x12 | Command rejected because PGM is running. | S2 |
ERR_CMD_UNKNOWN | 0x20 | Unknown command or not implemented optional command. | S2 |
ERR_CMD_SYNTAX | 0x21 | Command syntax invalid | S2 |
ERR_OUT_OF_RANGE | 0x22 | Command syntax valid but command parameter(s) out of range. | S2 |
ERR_WRITE_PROTECTED | 0x23 | The memory location is write protected. | S2 |
ERR_ACCESS_DENIED | 0x24 | The memory location is not accessible. | S2 |
ERR_ACCESS_LOCKED | 0x25 | Access denied, Seed & Key is required | S2 |
ERR_PAGE_NOT_VALID | 0x26 | Selected page not available | S2 |
ERR_MODE_NOT_VALID | 0x27 | Selected page mode not available | S2 |
ERR_SEGMENT_NOT_VALID | 0x28 | Selected segment not valid | S2 |
ERR_SEQUENCE | 0x29 | Sequence error | S2 |
ERR_DAQ_CONFIG | 0x2A | DAQ configuration not valid | S2 |
ERR_MEMORY_OVERFLOW | 0x30 | Memory overflow error | S2 |
ERR_GENERIC | 0x31 | Generic error. | S2 |
ERR_VERIFY | 0x32 | The slave internal program verify routine detects an error. | S3 |