大倾角DJC50DJC波状挡边输送机 轮式移动机器人结构设计 单片机定时闹钟设计 基于单片机的数字钟设计 圆皮带输送机 悬吊式升降机 倍速链条输送机…设计

Car conveyor line modified chain machine
汽车输送线改装的链条机

DTII(A)B1000 car belt tensioner
DTII(A)B1000车式拉紧皮带机

Diagram of coal machine on tipping bucket
翻斗上煤机示意图

180m2 sintering machine general assembly drawing (left)2 after cleaning
180m2烧结机总装配图(左式)2清理后

MSB20dsz-60 Humidifier (cad2004)
MSB20dsz-60加湿机(cad2004)

Chassis power supply production line diagram
机箱电源生产线方案图

Dt-ii belt machine Belt machine drawings
DTⅡ型皮带机皮带机图纸

180m2 sintering machine general assembly drawing (right)
180m2烧结机总装配图(右式)

LS200 screw conveyor structure diagram
LS200螺旋输送机结构示意图

A belt conveyor with trusses
一条带桁架的皮带机

Refrigerator assembly drawing
冷冻机总装图

ZH-YD700 sandblasting machine can
ZH-YD700喷砂机罐

L0104AB Screw machine layout scheme
L0104AB螺旋机布置方案

Dt-ii frame
DTⅡ机架

221 Belt machine drawings
221皮带机图纸

Pneumatic ash removal system drawing and layout drawing of 135MW unit
135MW机组气力除灰系统图和布置图

Storage machine
仓储机

DSJ100/63/2X75 retractable belt machine full set of drawings general drawing
DSJ100／63／2X75可伸缩皮带机全套图纸总图

B800-47900 Drawing of a coal feeder with impeller
B800-47900一条含叶轮给煤机的图纸

213 belt machine drawings
213皮带机图纸

DSJ100/63/2X75 retractable belt machine full set of drawings KHU01 head transmission device
DSJ100／63／2X75可伸缩皮带机全套图纸KHU01机头传动装置

Head cantilever belt conveyor
头部悬臂式皮带输送机

211 belt machine drawings
211皮带机图纸

HGBW800 bucket elevator
HGBW800斗式提升机

B800 belt machine sample.jpg
B800皮带机样本.jpg

205 belt machine drawings
205皮带机图纸

Fu150x40m chain conveyor
FU150X40米链运机

201 belt machine drawings
201皮带机图纸

F-BE101 elevator TD315X17.05M
F-BE101提升机TD315X17.05M

25t lifting weight 35m amplitude gantry crane
25t起重量35m幅度门座起重机

DJA80100-240 tape machine installation schematic diagram
DJA80100-240胶带机安装总示意图

1# flange belt conveyor
1#挡边带式输送机

10 m chain board machine after modification
10米链板机后修改

22.5+ 22.5-22-A6 crane
22.5＋22.5-22- A6起重机

12.9 Classification and application of glue filling machine
12.9灌胶机的分类及应用

DCY reducer installation drawing 160-450
DCY减速机安装图纸160-450

The head rack of the DTIIB1000
DTIIB1000的头架机架

5#B=1000 conveyor 2
5#B=1000输送机2

TH400 bucket lift
TH400斗提机

9-26-11.2D centrifugal fan assembly drawing
9-26-11.2D离心通风机总装图

C45-Q330-201Z type buried scraper conveyor
C45-Q330-201Z型埋刮板输送机

B1400 Conveyor
B1400输送机

9-26-11.2D centrifugal fan front cover panel
9-26-11.2D离心通风机 前盖板组

Large Angle DJC50DJC wave flange conveyor
大倾角DJC50DJC波状挡边输送机

Structural design of wheeled mobile robot (paper +CAD drawing + task book + Literature translation)
轮式移动机器人结构设计（论文+CAD图纸+任务书+文献翻译）

Single-chip timing alarm clock paper data -- 22 pages
单片机定时闹钟论文资料——22页

Digital clock design data based on single chip microcomputer with translation and program - 83 pages
基于单片机的数字钟设计资料含翻译及程序——83页

Head lifting mechanism
头部升降机构

Worktable lifting mechanism
工件台提升机构

Chain conveyor
链条输送机

Operate the rotary mechanism
操作盘旋转机构

Panel reserve lifting mechanism
面板储备升降机构

Block release mechanism using connecting rod
使用连杆的挡块解除机构

Pallet for chain conveyor
链条输送机用托盘

Remove the remote handle operating mechanism of the check assembly
解除止回组件的远距离把手操作机构

Round belt conveyor
圆皮带输送机

Suspension elevator
悬吊式升降机

Double speed chain conveyor
倍速链条输送机

Positioning mechanism using clamping action
使用夹紧动作的定位机构

Cavity door opening and closing mechanism
腔门开闭机构

Chip crimping mechanism
芯片压接机构

Semi-automatic loop ejector
半自动扣环排出机

Supporting mechanism for upper presumptive position
上推定位用支承机构

Grinding lifting rotary mechanism
研磨升降旋转机构

Dustproof elevator
防尘升降机

Workpiece rotation at any Angle (2 simultaneous) mechanism
工件任意角度旋转（2个同时）机构

Simple sliding position indexing mechanism
简易滑动位置分度机构

Flexible workpiece positioning mechanism
灵活型工件定位机构

Washer ejector
垫圈排出机

Pull down clamping mechanism
下拉夹紧机构

Offset center point Angle adjustment mechanism
偏置中心点的角度调整机构

3 position loading mechanism (different travel)
3位装载机构(不同行程)

< FESTO×MISUMI > Pallet moving elevator
＜FESTO×MISUMI＞托盘移动升降机

Semi-automatic plate ejector
半自动板排出机

Rotary loader
旋转装载机

Wire feed mechanism
铁丝进给机构

Film thermal cutting mechanism
薄膜热切割机构

The O-ring part fixing mechanism is used
使用了O形圈的零件固定机构

Tray centering mechanism
托盘定心机构

Positioning and locking mechanism of changing fixture (plate)
换装夹具（板）的定位和锁定机构

Inner diameter clamping and loosening mechanism based on connecting rod structure
基于连杆构造的内径夹紧、松开机构

Round rod feed mechanism in turn
圆棒依次进给机构

Linear motion mechanism based on rotary actuator
基于旋转驱动器的直线运动机构

Workpiece reversal transfer mechanism
工件反转转移机构

Z-axis lifting mechanism
Z轴升降机构

No-load clamping mechanism
空载夹紧机构

Left and right gripper variable opening manipulator
左右卡爪可变开度机械手

Angle adjusting mechanism
角度调节机构

Sliding discharge mechanism for thin workpieces
薄型工件的滑动排出机构

Push rod overload detection mechanism
推杆过载检测机构

Multi-stroke mechanism using eccentric cone CAM
使用偏心锥形凸轮的多段行程机构

Plate adsorption manipulator
平板吸附机械手

Prevents tray transfer from moving backwards
防止托盘传送反向移动机构

Mechanism for quickly switching between different workpiece heights
快速切换不同工件高度的机构

90° rotating moving mechanism
90°旋转移动机构

Panel direction changing mechanism
面板方向转换机构

Double centering mechanism
双重定心机构

Grooved guide roller shutter door mechanism
沟槽导轨卷帘门机构

Simple brake mechanism for pulling out reel products
拉出卷筒产品时的简易制动机构

Lifting mechanism without jamming
无卡住现象的提升机构