Android2.1下调试3G模块（三）

现在开始介绍如何实现ppp拨号上网。在/system/etc下创建ppp目录，并在ppp目录下创建以下文件：

 

1.init.gprs-pppd

1. #!/system/bin/sh
   
2. # An unforunate wrapper script
   
3. PPPD_PID=
   
4. /system/bin/setprop "net.gprs.ppp-exit" ""
   
5. /system/bin/log -t pppd "Starting pppd"
   
6. /system/bin/pppd call gprs $*
   
7. PPPD_EXIT=$?
   
8. PPPD_PID=$!
   
9. /system/bin/log -t pppd "pppd exited with $PPPD_EXIT"
   
10. /system/bin/setprop "net.gprs.ppp-exit" "$PPPD_EXIT"
    
11. exit $PPPD_EXIT

2.gprs-connect-chat

1. ABORT 'BUSY'
   
2. ABORT 'NO CARRIER'
   
3. ABORT 'ERROR'
   
4. ABORT '+CME ERROR: 100'
   
5. "" AT
   
6. OK AT+CGDCONT=1,"IP","CMNET"
   
7. OK AT+CGEQREQ=1,2,128,384,0,0,0,0,"0E0","0E0",,0,0
   
8. OK AT
   
9. OK AT
   
10. OK ATS0=0
    
11. OK AT
    
12. OK AT
    
13. OK ATDT*98*1# 
    
14. CONNECT

3.gprs-disconnect-chat

1. ABORT OK
   
2. ABORT BUSY
   
3. ABORT DELAYED
   
4. ABORT "NO ANSWER"
   
5. ABORT "NO CARRIER"
   
6. ABORT "NO DIALTONE"
   
7. ABORT VOICE
   
8. ABORT ERROR
   
9. ABORT RINGING
   
10. TIMEOUT 12
    
11. "" \\k\\k\\k\\d+++ATH
    
12. "NO CARRIER-AT-OK" ""

4.ip-up

1. #!/system/bin/sh
   
2. /system/bin/setprop "net.interfaces.defaultroute" "gprs"
   
3. /system/bin/setprop "net.gprs.dns1" "$DNS1"
   
4. /system/bin/setprop "net.gprs.dns2" "$DNS2"
   
5. /system/bin/setprop "net.gprs.local-ip" "$IPLOCAL"
   
6. /system/bin/setprop "net.gprs.remote-ip" "$IPREMOTE"
   
7. exit 0

5.ip-down

1. #!/system/bin/sh
   
2. case $1 in
   
3.     ppp1)
   
4.   echo 0 > /proc/sys/net/ipv4/ip_forward;
   
5.   ;;
   
6. esac
   
7. rm /etc/ppp/ppp*.pid
   
8. # Use interface name if linkname is not available
   
9. NAME=${LINKNAME:-"$1"}
   
10. #/system/bin/setprop "net.dns1" ""
    
11. #/system/bin/setprop "net.dns2" ""
    
12. /system/bin/setprop "net.$NAME.local-ip" ""
    
13. /system/bin/setprop "net.$NAME.remote-ip" ""

6.peers/gprs

1. # This is pppd script, used Huawei EM770W3G Module
   
2. # Usage: root>pppd call gprs
   
3. /dev/ttyUSB0
   
4. 115200
   
5. crtscts
   
6. modem
   
7. debug
   
8. nodetach
   
9. usepeerdns
   
10. noipdefault
    
11. defaultroute
    
12. user "cmnet"
    
13. 0.0.0.0:0.0.0.0
    
14. connect '/system/bin/chat -s -v -f /etc/ppp/gprs-connect-chat'
    
15. #disconnect '/bin/chat -v -f /etc/ppp/gprs-disconnect-chat'

 

文件创建好后只要在Android启动后进入"Settings(设置)"->"Wireless controls(无线网络)"->"Mobile networks(移动网络)"->"Access Points Name(接入点)",按Menu键弹出界面选择"New APN(新接入点)"，一般情况下只要填写"Name(名称)"和"APN"两项即可，"MCC"和"MNC"会随着运行商网络注册成功后自动生成，最后保存。现在就可以通过gprs上网了。