【ARM 裸机】模仿 STM32 驱动开发

最新推荐文章于 2024-08-08 17:25:34 发布
最新推荐文章于 2024-08-08 17:25:34 发布
阅读量637 收藏 10
点赞数 9
分类专栏： ARM 裸机 文章标签： linux arm开发 c语言 stm32
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/ZSW2027008838/article/details/138036345
版权
本文介绍了如何在STM32平台上修改驱动程序，包括添加清除BSS段代码、创建CCM、IOMUX和GPIO的寄存器结构体，以及如何在main.c中启用外设时钟、初始化GPIO和实现LED控制。同时，还展示了如何使用Makefile进行编译和烧写验证。
摘要由CSDN通过智能技术生成

1、修改驱动

对于 STM32 来说，使用了一个结构体将一个外设的所有寄存器都放在一起，在上一节的基础上进行修改；

1.1、添加清除 bss 段代码，

在这里插入图片描述

1.2、添加寄存器结构体

新建一个文件，命名imx6u.h，注意地址的连续性，不连续记得占位；
在这里插入图片描述
让定义的结构体和基地址联系起来
在这里插入图片描述
其他外设也一样，包含 CCM_Type、IOMUX_SW_MUX_Type、IOMUX_SW_PAD_Type、GPIO_Type；
imx6u.h

// 外设寄存器组的基地址
#define CCM_BASE					(0X020C4000)
#define IOMUX_SW_MUX_BASE			(0X020E0044)
#define IOMUX_SW_PAD_BASE			(0X020E0204)
#define GPIO1_BASE                  (0X0209C000)

// CCM 外设
typedef struct 
{
    volatile unsigned int CCR;
    volatile unsigned int CCDR;
    volatile unsigned int CSR;
	volatile unsigned int CCSR;
	volatile unsigned int CACRR;
	volatile unsigned int CBCDR;
	volatile unsigned int CBCMR;
	volatile unsigned int CSCMR1;
	volatile unsigned int CSCMR2;
	volatile unsigned int CSCDR1;
	volatile unsigned int CS1CDR;
	volatile unsigned int CS2CDR;
	volatile unsigned int CDCDR;
	volatile unsigned int CHSCCDR;
	volatile unsigned int CSCDR2;
	volatile unsigned int CSCDR3;	
	volatile unsigned int RESERVED_1[2];
	volatile unsigned int CDHIPR;  
	volatile unsigned int RESERVED_2[2];
	volatile unsigned int CLPCR;
	volatile unsigned int CISR;
	volatile unsigned int CIMR;
	volatile unsigned int CCOSR;
	volatile unsigned int CGPR;
	volatile unsigned int CCGR0;
	volatile unsigned int CCGR1;
	volatile unsigned int CCGR2;
	volatile unsigned int CCGR3;
	volatile unsigned int CCGR4;
	volatile unsigned int CCGR5;
	volatile unsigned int CCGR6;
	volatile unsigned int RESERVED_3[1];
	volatile unsigned int CMEOR;
}CCM_Type;

// IOMUX 寄存器组
typedef struct 
{
	volatile unsigned int JTAG_MOD;
	volatile unsigned int JTAG_TMS;
	volatile unsigned int JTAG_TDO;
	volatile unsigned int JTAG_TDI;
	volatile unsigned int JTAG_TCK;
	volatile unsigned int JTAG_TRST_B;
	volatile unsigned int GPIO1_IO00;
	volatile unsigned int GPIO1_IO01;
	volatile unsigned int GPIO1_IO02;
	volatile unsigned int GPIO1_IO03;
	volatile unsigned int GPIO1_IO04;
	volatile unsigned int GPIO1_IO05;
	volatile unsigned int GPIO1_IO06;
	volatile unsigned int GPIO1_IO07;
	volatile unsigned int GPIO1_IO08;
	volatile unsigned int GPIO1_IO09;
	volatile unsigned int UART1_TX_DATA;
	volatile unsigned int UART1_RX_DATA;
	volatile unsigned int UART1_CTS_B;
	volatile unsigned int UART1_RTS_B;
	volatile unsigned int UART2_TX_DATA;
	volatile unsigned int UART2_RX_DATA;
	volatile unsigned int UART2_CTS_B;
	volatile unsigned int UART2_RTS_B;
	volatile unsigned int UART3_TX_DATA;
	volatile unsigned int UART3_RX_DATA;
	volatile unsigned int UART3_CTS_B;
	volatile unsigned int UART3_RTS_B;
	volatile unsigned int UART4_TX_DATA;
	volatile unsigned int UART4_RX_DATA;
	volatile unsigned int UART5_TX_DATA;
	volatile unsigned int UART5_RX_DATA;
	volatile unsigned int ENET1_RX_DATA0;
	volatile unsigned int ENET1_RX_DATA1;
	volatile unsigned int ENET1_RX_EN;
	volatile unsigned int ENET1_TX_DATA0;
	volatile unsigned int ENET1_TX_DATA1;
	volatile unsigned int ENET1_TX_EN;
	volatile unsigned int ENET1_TX_CLK;
	volatile unsigned int ENET1_RX_ER;
	volatile unsigned int ENET2_RX_DATA0;
	volatile unsigned int ENET2_RX_DATA1;
	volatile unsigned int ENET2_RX_EN;
	volatile unsigned int ENET2_TX_DATA0;
	volatile unsigned int ENET2_TX_DATA1;
	volatile unsigned int ENET2_TX_EN;
	volatile unsigned int ENET2_TX_CLK;
	volatile unsigned int ENET2_RX_ER;
	volatile unsigned int LCD_CLK;
	volatile unsigned int LCD_ENABLE;
	volatile unsigned int LCD_HSYNC;
	volatile unsigned int LCD_VSYNC;
	volatile unsigned int LCD_RESET;
	volatile unsigned int LCD_DATA00;
	volatile unsigned int LCD_DATA01;
	volatile unsigned int LCD_DATA02;
	volatile unsigned int LCD_DATA03;
	volatile unsigned int LCD_DATA04;
	volatile unsigned int LCD_DATA05;
	volatile unsigned int LCD_DATA06;
	volatile unsigned int LCD_DATA07;
	volatile unsigned int LCD_DATA08;
	volatile unsigned int LCD_DATA09;
	volatile unsigned int LCD_DATA10;
	volatile unsigned int LCD_DATA11;
	volatile unsigned int LCD_DATA12;
	volatile unsigned int LCD_DATA13;
	volatile unsigned int LCD_DATA14;
	volatile unsigned int LCD_DATA15;
	volatile unsigned int LCD_DATA16;
	volatile unsigned int LCD_DATA17;
	volatile unsigned int LCD_DATA18;
	volatile unsigned int LCD_DATA19;
	volatile unsigned int LCD_DATA20;
	volatile unsigned int LCD_DATA21;
	volatile unsigned int LCD_DATA22;
	volatile unsigned int LCD_DATA23;
	volatile unsigned int NAND_RE_B;
	volatile unsigned int NAND_WE_B;
	volatile unsigned int NAND_DATA00;
	volatile unsigned int NAND_DATA01;
	volatile unsigned int NAND_DATA02;
	volatile unsigned int NAND_DATA03;
	volatile unsigned int NAND_DATA04;
	volatile unsigned int NAND_DATA05;
	volatile unsigned int NAND_DATA06;
	volatile unsigned int NAND_DATA07;
	volatile unsigned int NAND_ALE;
	volatile unsigned int NAND_WP_B;
	volatile unsigned int NAND_READY_B;
	volatile unsigned int NAND_CE0_B;
	volatile unsigned int NAND_CE1_B;
	volatile unsigned int NAND_CLE;
	volatile unsigned int NAND_DQS;
	volatile unsigned int SD1_CMD;
	volatile unsigned int SD1_CLK;
	volatile unsigned int SD1_DATA0;
	volatile unsigned int SD1_DATA1;
	volatile unsigned int SD1_DATA2;
	volatile unsigned int SD1_DATA3;
	volatile unsigned int CSI_MCLK;
	volatile unsigned int CSI_PIXCLK;
	volatile unsigned int CSI_VSYNC;
	volatile unsigned int CSI_HSYNC;
	volatile unsigned int CSI_DATA00;
	volatile unsigned int CSI_DATA01;
	volatile unsigned int CSI_DATA02;
	volatile unsigned int CSI_DATA03;
	volatile unsigned int CSI_DATA04;
	volatile unsigned int CSI_DATA05;
	volatile unsigned int CSI_DATA06;
	volatile unsigned int CSI_DATA07;
}IOMUX_SW_MUX_Type;

typedef struct 
{
	volatile unsigned int DRAM_ADDR00;
	volatile unsigned int DRAM_ADDR01;
	volatile unsigned int DRAM_ADDR02;
	volatile unsigned int DRAM_ADDR03;
	volatile unsigned int DRAM_ADDR04;
	volatile unsigned int DRAM_ADDR05;
	volatile unsigned int DRAM_ADDR06;
	volatile unsigned int DRAM_ADDR07;
	volatile unsigned int DRAM_ADDR08;
	volatile unsigned int DRAM_ADDR09;
	volatile unsigned int DRAM_ADDR10;
	volatile unsigned int DRAM_ADDR11;
	volatile unsigned int DRAM_ADDR12;
	volatile unsigned int DRAM_ADDR13;
	volatile unsigned int DRAM_ADDR14;
	volatile unsigned int DRAM_ADDR15;
	volatile unsigned int DRAM_DQM0;
	volatile unsigned int DRAM_DQM1;
	volatile unsigned int DRAM_RAS_B;
	volatile unsigned int DRAM_CAS_B;
	volatile unsigned int DRAM_CS0_B;
	volatile unsigned int DRAM_CS1_B;
	volatile unsigned int DRAM_SDWE_B;
	volatile unsigned int DRAM_ODT0;
	volatile unsigned int DRAM_ODT1;
	volatile unsigned int DRAM_SDBA0;
	volatile unsigned int DRAM_SDBA1;
	volatile unsigned int DRAM_SDBA2;
	volatile unsigned int DRAM_SDCKE0;
	volatile unsigned int DRAM_SDCKE1;
	volatile unsigned int DRAM_SDCLK0_P;
	volatile unsigned int DRAM_SDQS0_P;
	volatile unsigned int DRAM_SDQS1_P;
	volatile unsigned int DRAM_RESET;
	volatile unsigned int TEST_MODE;
	volatile unsigned int POR_B;
	volatile unsigned int ONOFF;
	volatile unsigned int SNVS_PMIC_ON_REQ;
	volatile unsigned int CCM_PMIC_STBY_REQ;
	volatile unsigned int BOOT_MODE0;
	volatile unsigned int BOOT_MODE1;
	volatile unsigned int SNVS_TAMPER0;
	volatile unsigned int SNVS_TAMPER1;
	volatile unsigned int SNVS_TAMPER2;
	volatile unsigned int SNVS_TAMPER3;
	volatile unsigned int SNVS_TAMPER4;
	volatile unsigned int SNVS_TAMPER5;
	volatile unsigned int SNVS_TAMPER6;
	volatile unsigned int SNVS_TAMPER7;
	volatile unsigned int SNVS_TAMPER8;
	volatile unsigned int SNVS_TAMPER9;
	volatile unsigned int JTAG_MOD;
	volatile unsigned int JTAG_TMS;
	volatile unsigned int JTAG_TDO;
	volatile unsigned int JTAG_TDI;
	volatile unsigned int JTAG_TCK;
	volatile unsigned int JTAG_TRST_B;
	volatile unsigned int GPIO1_IO00;
	volatile unsigned int GPIO1_IO01;
	volatile unsigned int GPIO1_IO02;
	volatile unsigned int GPIO1_IO03;
	volatile unsigned int GPIO1_IO04;
	volatile unsigned int GPIO1_IO05;
	volatile unsigned int GPIO1_IO06;
	volatile unsigned int GPIO1_IO07;
	volatile unsigned int GPIO1_IO08;
	volatile unsigned int GPIO1_IO09;
	volatile unsigned int UART1_TX_DATA;
	volatile unsigned int UART1_RX_DATA;
	volatile unsigned int UART1_CTS_B;
	volatile unsigned int UART1_RTS_B;
	volatile unsigned int UART2_TX_DATA;
	volatile unsigned int UART2_RX_DATA;
	volatile unsigned int UART2_CTS_B;
	volatile unsigned int UART2_RTS_B;
	volatile unsigned int UART3_TX_DATA;
	volatile unsigned int UART3_RX_DATA;
	volatile unsigned int UART3_CTS_B;
	volatile unsigned int UART3_RTS_B;
	volatile unsigned int UART4_TX_DATA;
	volatile unsigned int UART4_RX_DATA;
	volatile unsigned int UART5_TX_DATA;
	volatile unsigned int UART5_RX_DATA;
	volatile unsigned int ENET1_RX_DATA0;
	volatile unsigned int ENET1_RX_DATA1;
	volatile unsigned int ENET1_RX_EN;
	volatile unsigned int ENET1_TX_DATA0;
	volatile unsigned int ENET1_TX_DATA1;
	volatile unsigned int ENET1_TX_EN;
	volatile unsigned int ENET1_TX_CLK;
	volatile unsigned int ENET1_RX_ER;
	volatile unsigned int ENET2_RX_DATA0;
	volatile unsigned int ENET2_RX_DATA1;
	volatile unsigned int ENET2_RX_EN;
	volatile unsigned int ENET2_TX_DATA0;
	volatile unsigned int ENET2_TX_DATA1;
	volatile unsigned int ENET2_TX_EN;
	volatile unsigned int ENET2_TX_CLK;
	volatile unsigned int ENET2_RX_ER;
	volatile unsigned int LCD_CLK;
	volatile unsigned int LCD_ENABLE;
	volatile unsigned int LCD_HSYNC;
	volatile unsigned int LCD_VSYNC;
	volatile unsigned int LCD_RESET;
	volatile unsigned int LCD_DATA00;
	volatile unsigned int LCD_DATA01;
	volatile unsigned int LCD_DATA02;
	volatile unsigned int LCD_DATA03;
	volatile unsigned int LCD_DATA04;
	volatile unsigned int LCD_DATA05;
	volatile unsigned int LCD_DATA06;
	volatile unsigned int LCD_DATA07;
	volatile unsigned int LCD_DATA08;
	volatile unsigned int LCD_DATA09;
	volatile unsigned int LCD_DATA10;
	volatile unsigned int LCD_DATA11;
	volatile unsigned int LCD_DATA12;
	volatile unsigned int LCD_DATA13;
	volatile unsigned int LCD_DATA14;
	volatile unsigned int LCD_DATA15;
	volatile unsigned int LCD_DATA16;
	volatile unsigned int LCD_DATA17;
	volatile unsigned int LCD_DATA18;
	volatile unsigned int LCD_DATA19;
	volatile unsigned int LCD_DATA20;
	volatile unsigned int LCD_DATA21;
	volatile unsigned int LCD_DATA22;
	volatile unsigned int LCD_DATA23;
	volatile unsigned int NAND_RE_B;
	volatile unsigned int NAND_WE_B;
	volatile unsigned int NAND_DATA00;
	volatile unsigned int NAND_DATA01;
	volatile unsigned int NAND_DATA02;
	volatile unsigned int NAND_DATA03;
	volatile unsigned int NAND_DATA04;
	volatile unsigned int NAND_DATA05;
	volatile unsigned int NAND_DATA06;
	volatile unsigned int NAND_DATA07;
	volatile unsigned int NAND_ALE;
	volatile unsigned int NAND_WP_B;
	volatile unsigned int NAND_READY_B;
	volatile unsigned int NAND_CE0_B;
	volatile unsigned int NAND_CE1_B;
	volatile unsigned int NAND_CLE;
	volatile unsigned int NAND_DQS;
	volatile unsigned int SD1_CMD;
	volatile unsigned int SD1_CLK;
	volatile unsigned int SD1_DATA0;
	volatile unsigned int SD1_DATA1;
	volatile unsigned int SD1_DATA2;
	volatile unsigned int SD1_DATA3;
	volatile unsigned int CSI_MCLK;
	volatile unsigned int CSI_PIXCLK;
	volatile unsigned int CSI_VSYNC;
	volatile unsigned int CSI_HSYNC;
	volatile unsigned int CSI_DATA00;
	volatile unsigned int CSI_DATA01;
	volatile unsigned int CSI_DATA02;
	volatile unsigned int CSI_DATA03;
	volatile unsigned int CSI_DATA04;
	volatile unsigned int CSI_DATA05;
	volatile unsigned int CSI_DATA06;
	volatile unsigned int CSI_DATA07;
	volatile unsigned int GRP_ADDDS;
	volatile unsigned int GRP_DDRMODE_CTL;
	volatile unsigned int GRP_B0DS;
	volatile unsigned int GRP_DDRPK;
	volatile unsigned int GRP_CTLDS;
	volatile unsigned int GRP_B1DS;
	volatile unsigned int GRP_DDRHYS;
	volatile unsigned int GRP_DDRPKE;
	volatile unsigned int GRP_DDRMODE;
	volatile unsigned int GRP_DDR_TYPE;
}IOMUX_SW_PAD_Type;

// GPIO寄存器结构体
typedef struct 
{
	volatile unsigned int DR;							
	volatile unsigned int GDIR; 							
	volatile unsigned int PSR;								
	volatile unsigned int ICR1; 							
	volatile unsigned int ICR2; 							 
	volatile unsigned int IMR;								 
	volatile unsigned int ISR;			
	volatile unsigned int EDGE_SEL;  
}GPIO_Type;

// 外设指针 
#define CCM					((CCM_Type *)CCM_BASE)
#define IOMUX_SW_MUX		((IOMUX_SW_MUX_Type *)IOMUX_SW_MUX_BASE)
#define IOMUX_SW_PAD		((IOMUX_SW_PAD_Type *)IOMUX_SW_PAD_BASE)
#define GPIO1				((GPIO_Type *)GPIO1_BASE)

2、修改 main.c；

在这里插入图片描述

#include "imx6u.h"

// 使能外设时钟
void clk_enable(void)
{
    CCM->CCGR0 = 0xffffffff;
	CCM->CCGR1 = 0xffffffff;
	CCM->CCGR2 = 0xffffffff;
	CCM->CCGR3 = 0xffffffff;
	CCM->CCGR4 = 0xffffffff;
	CCM->CCGR5 = 0xffffffff;
	CCM->CCGR6 = 0xffffffff;
}

// 初始化 led
void led_init(void)
{
    IOMUX_SW_MUX->GPIO1_IO03 = 0x5;   // 复用为 GPIO1_IO03
    IOMUX_SW_PAD->GPIO1_IO03 =0x10b0;   // 配置电气属性

    // GPIO 初始化
    GPIO1->GDIR = 0x8;   // 设置为输出
    GPIO1->DR = 0x0;   // 打开 led
}

// 短延时
void delay_short(volatile unsigned int n)
{
    while(n--){}
}

// 长延时,在 396MHz 下一次循环大概 1 ms
void delay_ms(volatile unsigned int n)
{
    while(n--)
    {
        delay_short(0x7ff);
    }
} 

// 打开 led
void led_on(void)
{
    GPIO1->DR &= ~(1<<3);   // bit3 清零
}

// 关闭 led
void led_off(void)
{
    GPIO1->DR |= (1<<3);   // bit3 置1
}

int main(void)
{
    clk_enable();
    led_init();

    // led 闪烁
    while(1)
    {
        led_off();
        delay_ms(100);
        led_on();
        delay_ms(100);
    }
    return 0; 
}

3、修改 Makefile；

在这里插入图片描述

objs    := start.o main.o
gcc     := arm-linux-gnueabihf-gcc
ld      := arm-linux-gnueabihf-ld
objcopy := arm-linux-gnueabihf-objcopy
objdump := arm-linux-gnueabihf-objdump

ledc.bin : $(objs)
	$(ld) -Timx6u.lds -o ledc.elf $^
	$(objcopy) -O binary -S ledc.elf $@
	$(objdump) -D -m arm ledc.elf > ledc.dis

%.o : %.c
	$(gcc) -Wall -nostdlib -c -O2 -o $@ $<

%.o : %.s
	$(gcc) -Wall -nostdlib -c -O2 -o $@ $<

clean:
	rm -rf *.o ledc.bin ledc.elf ledc.dis

给出连接脚本

SECTIONS{
	. = 0X87800000;
	.text :
	{
		start.o 
		*(.text)
	}
	.rodata ALIGN(4) : {*(.rodata*)}     
	.data ALIGN(4)   : { *(.data) }    
	__bss_start = .;    
	.bss ALIGN(4)  : { *(.bss)  *(COMMON) }    
	__bss_end = .;
}

4、编译烧写验证；

在这里插入图片描述

I.MX6ULL_ledc_stm32

电工电子电路
关注
  • 9
    点赞
  • 踩
  • 10
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
ARM（IMX6U）裸机模仿STM32驱动开发实验(定义外设结构体)
zhuguanlin121的博客
07-21 458
1.模仿STM32寄存器的定义 1.1、STM32寄存器定义简介 1.2、I.MX6U寄存器定义 1.编写外设结构体 2.定义 IO 复用寄存器组的基地址 3.定义访问指针 2.硬件原理分析，和之前的硬件资源一样 3.实验程序编写 1.imx6ul.h 2.main.c 3.start.s 4.编译下载验证 1.编写链接脚本 2.编写Makefile脚本 3.编译下载
Linux之ARM（IMX6U）裸机模仿STM32驱动开发格式
一只青木呀
08-15 744
Linux之ARM（MX6U）裸机模仿STM32驱动开发格式模仿 STM32 驱动开发格式实验1.模仿STM32寄存器的定义1.1、STM32寄存器定义简介1.2、I.MX6U寄存器定义1.编写外设结构体2.定义 IO 复用寄存器组的基地址3.定义访问指针2.硬件原理分析，和之前的硬件资源一样3.实验程序编写1. imx6ul.h2.main.c3.start.s4.编译下载验证1.编写连接脚本2.编写Makefile脚本3.编译下载 模仿 STM32 驱动开发格式实验 C 语言编写 LED 灯驱动的时候，
【嵌入式Linux】14-裸机-模仿STM32驱动开发
qq_44772822的博客
12-08 310
此笔记由个人整理 塞上苍鹰_fly 课程来自：正点原子_手把手教你学Linux 一、STM32寄存器结构体详解 对STM32而言，使用一个结构体将一个外设的所有寄存器都放在一起 STM32F103点灯程序 GPIOE->CRL&=0XFF0FFFFF; GPIOE->CRL|=0X00300000; //PE5 推挽输出 GPIOE->ODR|=1<<5; //PE5 输出高 始化 STM32 的 PE5 这个 GPIO 为推挽输出，需要配置的就是 .
正点原子Linux裸机开发学习笔记02模仿STM32驱动开发格式实验
m0_63237214的博客
04-25 431
其他所有没有分配给片上存储器和外设的存储器空间都是保留的地址空间，请参考相应器件的数据手册中的存储器映像图。数据字节以小端格式存放在存储器中。一个字里的最低地址字节被认为是该字的最低有效字 节，而最高地址字节是最高有效字节。，这些寄存 器在结构体中的位置都是按照其地址值从小到大排序的。是个结构体，结构体里面的成员变量有。GPIOE_BASE的基本地址。”是个宏定义，是一个指向地址。的寄存器，每个成员变量都是。GPIOE 的基地址为。的结构体指针，结构体为。GPIOE这部分为例。
Linux之ARM（MX6U）裸机模仿 STM32 驱动开发格式实验 --驱动编写、编译
weixin_47932709的博客
08-16 490
Linux之ARM（MX6U）裸机模仿 STM32 驱动开发格式实验 --驱动编写、编译 一、模仿 STM32 寄存器定义 ①STM32 寄存器定义简介 为了开发方便，ST 官方为 STM32F103 编写了一个叫做 stm32f10x.h 的文件，在这个文件 里面定义了 STM32F103 所有外设寄存器，我们可以使用其定义的寄存器来进行开发，比如我 们可以用如下代码来初始化一个 GPIO： GPIOE->CRL&=0XFF0FFFFF; GPIOE->CRL|=0X00300000
正点原子[第二期]Linux之ARM（MX6U）裸机篇学习笔记-9.1-LED灯（模仿STM32驱动开发实验）
weixin_40289409的博客
04-30 571
本文是根据哔哩哔哩网站上“正点原子[第二期]Linux之ARM（MX6U）裸机篇”视频的学习笔记，在这里会记录下正点原子 I.MX6ULL 开发板的配套视频教程所作的实验和学习笔记内容。本文大量引用了正点原子教学视频和链接中的内容。
模仿 STM32 驱动开发格式实验
hvbkbb的博客
02-17 1219
为了开发方便，ST官方为STM32F103编写了一个叫做的文件，在这个文件里面定义了STM32F103 所有外设寄存器，我们可以使用其定义的寄存器来进行开发，比如我 们可以用如下代码来初始化一个 GPIO：上述代码是初始化STM32的PE5这个GPIO为推挽输出，需要配置的就是GPIOE的寄存器CRL和ODR， “GPIOE”的定义：可以看出“GPIOE”是个宏定义，是一个指向地址GPIOE_BASE的结构体指针，结构体为。
嵌入式Linux裸机开发笔记4(IMX6ULL)—模仿 STM32 驱动开发格式实验（2）
qq_55730568的博客
12-04 185
在编写寄存器组结构体的时候注意寄存器的地址是否连续，有些外设的寄存器地址可能不是连续的，会有一些保留地址，因此我们需要在结构体中留出这些保留的寄存器。的复用功能就可以通过“IOMUX_SW_MUX->GPIO1_IO03。文件一样，只是函数体写法变了，寄存器的访问采用 imx6ul.h。SW_MUX_CTL_PAD_GPIO1_IO03赋值。的内容和上一章一样，可以直接使用上一章的链接脚本文件。按照地址顺序递增的原理，寄存器 CMEOR。个字节，如果寄存器地址连续的 话应该只差 4。
正点原子ARM裸机开发篇
如月之恒，如日之升
02-19 1460
记录
linux 目录详解
最新发布
zhanglinlang的专栏
08-08 283
名称 作用 / 根目录系统的起点，跟目录下只放目录不要直接放文件 /bin 存放所有用户都可以使用的Linux基本操作命令（如ls、cp、mkdir等）。这些命令通常是用于系统管理和日常操作的常用工具 /sbin 存放系统管理相关的二进制文件，这些文件通常是系统管理员使用的命令，如fdisk、shutdown、mount等。与/bin目录不同的是，/sbin目录中的命令普通用户通常只能查看而不能执行。 /boot 存放引导相关文件，如Linux内核文件（vmlinuz）和引导装载
【Linux】进程间通信：详解 VSCode使用 | 匿名管道
2301_80171004的博客
08-05 895
本文将带你从Linux下VSCode的高效使用入手，探索进程间通信的基础概念，并深入讲解匿名管道的原理及其实现。从连接云服务器到编写代码，一步步掌握进程间通信
Linux shell编程学习笔记68： curl 命令行网络数据传输工具 选项数量雷人（上）
Purpleendurer@CSDN
08-04 1075
在网络时代，有经常需要在网络上传输数据，时我们需要通过网络下载文件，为了满足这种时代需要，Linux提供了众多网络命令，我们今天先研究curl命令。例如，我们可以使用curl从 URL 下载文件，或将文件上传到服务器。
在Linux中宏观的看待线程
2301_77479435的博客
08-07 248
在Linux中宏观的看待线程
【Linux 从基础到进阶】进程管理与性能调优
weixin_39372311的博客
08-08 328
通过本文的介绍，您已经了解了 Linux 系统中进程管理和性能调优的基本概念和操作方法。本文提供了适用于 CentOS 和 Ubuntu 系统的具体命令和示例，涵盖了 CPU、内存、I/O 和网络的性能调优策略。合理的进程管理和性能调优可以显著提升系统的稳定性和运行效率。如有任何问题或需要进一步的帮助，请参考CentOS 官方文档和Ubuntu 官方文档或在 CSDN 博客中查阅相关内容。
Linux5：Shell编程——函数、重定向
纸上得来终觉浅
08-05 1448
Shell编程——函数、重定向
Linux Java服务管理脚本（启动、停止、查看状态）
程序员阿华的博客
08-08 70
Linux Java服务管理脚本（启动、停止、查看状态）
Linux 调试之动态打印
Teminator_的博客
08-08 1033
在 kernel 驱动代码中，使用动态输出是系统内核调试的重要手段之一，printk打印是全局的，只能设置输出等级，而且使用printk每次都要重新编译内核，很不方便。。而动态输出可以在不需要重新编译内核的情况下，方便的打印出内核的 debug 信息。动态输出可以动态选择打开某个内核子系统的输出，可以有选择性地打开某些模块的输出，printk被dev_infodev_dbgdev_err之类的函数代替，dev_xxx函数的本质还是使用printk打印的，只是对printk进行了一层包装。
Linux查看系统线程数
csdn565973850的博客
08-07 504
Linux查看系统线程数
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值