EC20模块GPS功能的AT指令顺序

可选：
AT+QGPSCFG=“gpsnmeatype”,2
只输出RMC信息
AT+QGPSCFG: “autogps”,1
上电即输出GPS信息，0为关闭
1.AT串口（波特率9600）输入“AT+QGPS=1”，启动GPS获取。（室外，大概一分钟）
NMEA串口（波特率9600）拿到的数据：（1次/s）
$GPGSV,5,1,20,01,69,037,33,03,29,136,34,05,27,06,24*7E

$GPGSV,5,2,20,07,28,196,45,08,22,067,36,14,49,322,34,17,31,288,32*79

$GPGSV,5,3,20,19,10,271,41,21,43,040,26,22,37,102,38,28,38,320,33*7D

$GPGSV,5,4,20,30,43,246,45,39,39,40,34,41,42*4F

$GPGSV,5,5,20,48,34,49,34,50,38,51,34*77

$GPGGA,060819.00,3129.190413,N,12018.869029,E,1,11,0.6,28.2,M,7.0,M,*62

$GPVTG,298.2,T,303.0,M,0.0,N,0.0,K,A*22

$GPRMC,060819.00,A,3129.190413,N,12018.869029,E,0.0,298.2,290421,4.8,W,A*21

$GPGSA,A,2,01,03,07,08,14,17,19,21,22,28,30,1.0,0.6,0.7*3F

2.AT串口（波特率9600）输入“AT+QGPSLOC=2”，获取坐标信息。
AT串口（波特率9600）拿到的数据：（1次/s）

+QGPSLOC: 060816.0,31.48651,120.31448,0.6,27.0,2,298.13,0.0,0.0,290421,11

3.关闭
AT+QGPSEND