px4的CMakelists.txt阅读

最新推荐文章于 2023-10-24 10:01:31 发布

习惯就好zz

最新推荐文章于 2023-10-24 10:01:31 发布

阅读量774

点赞数

分类专栏： # STM32

本文为博主原创文章，未经博主允许不得转载。

本文链接：https://blog.csdn.net/ch122633/article/details/77176609

版权

STM32 专栏收录该内容

39 篇文章 2 订阅

订阅专栏

############################################################################
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
#=============================================================================
# CMAKE CODING STANDARD FOR PX4
#
# Structure
# ---------------------------------------------------------------------------
#
# * Common functions should be included in px_base.cmake.
#
# * OS/ board specific fucntions should be include in
# px_impl_${OS}.cmake or px4_impl_${OS}_${BOARD}.cmake.
#
# Formatting
# ---------------------------------------------------------------------------
#
# * Use hard indents to match the px4 source code.
#
# * All function and script arguments are upper case.
#
# * All local variables are lower case.
#
# * All cmake functions are lowercase.
#
# * For else, endif, endfunction, etc, never put the name of the statement
#
# Functions/Macros
# ---------------------------------------------------------------------------
#
# * Use px4_parse_function_args to parse functions and check for required
# arguments. Unless there is only one argument in the function and it is clear.
#
# * Never use macros. They allow overwriting global variables and this
# makes variable declarations hard to locate.
#
# * If a target from add_custom_* is set in a function, explicitly pass it
# as an output argument so that the target name is clear to the user.
#
# * Avoid use of global variables in functions. Functions in a nested
# scope may use global variables, but this makes it difficult to
# resuse functions.
#
# Included CMake Files
# ---------------------------------------------------------------------------
#
# * All variables in config files must have the prefix "config_".
#
# * Never set global variables in an included cmake file,
# you may only define functions. This excludes config and Toolchain files.
# This makes it clear to the user when variables are being set or targets
# are being created.
#
# * Setting a global variable in a CMakeLists.txt file is ok, because
# each CMakeLists.txt file has scope in the current directory and all
# subdirectories, so it is not truly global.
#
# * All toolchain files should be included in the cmake
# directory and named Toolchain-"name".cmake.
#
# Misc
# ---------------------------------------------------------------------------
#
# * If referencing a string variable, don't put it in quotes.
# Don't do "${OS}" STREQUAL "posix",
# instead type ${OS} STREQUAL "posix". This will throw an
# error when ${OS} is not defined instead of silently
# evaluating to false.
#
#=============================================================================
if (${CMAKE_VERSION} VERSION_LESS 3.1.0) //判断cmake版本不能低于3.1.0
message("Not a valid CMake version")
message("On Ubuntu >= 16.04, install or upgrade via:")
message(" sudo apt-get install cmake")
message("")
message("Official website: https://cmake.org/download/")
message(FATAL_ERROR "Update CMake and try again" )
endif()
# Warning: Changing this modifies CMake's internal workings
# and leads to wrong toolchain detection
cmake_minimum_required(VERSION 3.1 FATAL_ERROR)
set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}") //设置PX4源文件目录
set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}") //设置运行程序目录
execute_process( //执行一个或多个子进程
COMMAND Tools/check_submodules.sh //运行了tools/check_submodules.sh
WORKING_DIRECTORY ${PX4_SOURCE_DIR} //工作目录再px4目录下为当前目录
)
#=============================================================================
# configuration
#
# must come before project to set toolchain
set(CONFIG "posix_sitl_default" CACHE STRING "desired configuration")
string(REPLACE "_" ";" config_args ${CONFIG})
list(GET config_args 0 OS)
list(GET config_args 1 BOARD)
list(GET config_args 2 LABEL)
set(target_name "${OS}-${BOARD}-${LABEL}")
file(GLOB_RECURSE configs RELATIVE cmake/configs "cmake/configs/*.cmake")
set_property(CACHE CONFIG PROPERTY STRINGS ${configs})
set(THREADS "4" CACHE STRING "number of threads to use for external build processes")
set(DEBUG_PORT "/dev/ttyACM0" CACHE STRING "debugging port")
set(EXTERNAL_MODULES_LOCATION "" CACHE STRING "External modules source location")
if (NOT EXTERNAL_MODULES_LOCATION STREQUAL "")
get_filename_component(EXTERNAL_MODULES_LOCATION "${EXTERNAL_MODULES_LOCATION}" ABSOLUTE)
endif()
list(APPEND CMAKE_MODULE_PATH "${PX4_SOURCE_DIR}/cmake")
message(STATUS "CMAKE_MODULE_PATH: ${CMAKE_MODULE_PATH}")
set(config_module "configs/${CONFIG}")
include(${config_module})
include(common/coverage)
include(common/sanitizers)
# CMake build type
# Debug Release RelWithDebInfo MinSizeRel Coverage
if (NOT CMAKE_BUILD_TYPE)
if (${OS} STREQUAL "nuttx")
set(PX4_BUILD_TYPE "MinSizeRel")
elseif (${OS} STREQUAL "bebop")
set(PX4_BUILD_TYPE "MinSizeRel")
else()
set(PX4_BUILD_TYPE "RelWithDebInfo")
endif()
set(CMAKE_BUILD_TYPE ${PX4_BUILD_TYPE} CACHE STRING "Build type" FORCE)
endif()
set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug;Release;RelWithDebInfo;MinSizeRel;Coverage")
message(STATUS "Build Type: ${CMAKE_BUILD_TYPE}")
#=============================================================================
# git
#
include(common/px4_git)
execute_process(
COMMAND git describe --always --tags
OUTPUT_VARIABLE git_tag
OUTPUT_STRIP_TRAILING_WHITESPACE
WORKING_DIRECTORY ${PX4_SOURCE_DIR}
)
execute_process(
COMMAND Tools/tag_to_version.py --root ${PX4_SOURCE_DIR}
OUTPUT_VARIABLE git_version
WORKING_DIRECTORY ${PX4_SOURCE_DIR}
)
px4_add_git_submodule(TARGET git_cmake_hexagon PATH "cmake/cmake_hexagon")
px4_add_git_submodule(TARGET git_driverframework PATH "src/lib/DriverFramework")
px4_add_git_submodule(TARGET git_ecl PATH "src/lib/ecl")
px4_add_git_submodule(TARGET git_gazebo PATH "Tools/sitl_gazebo")
px4_add_git_submodule(TARGET git_gazebo_flow PATH "Tools/sitl_gazebo/external/OpticalFlow")
px4_add_git_submodule(TARGET git_gazebo_klt PATH "Tools/sitl_gazebo/external/OpticalFlow/external/klt_feature_tracker")
px4_add_git_submodule(TARGET git_gencpp PATH "Tools/gencpp")
px4_add_git_submodule(TARGET git_genmsg PATH "Tools/genmsg")
px4_add_git_submodule(TARGET git_gps_devices PATH "src/drivers/gps/devices")
px4_add_git_submodule(TARGET git_jmavsim PATH "Tools/jMAVSim")
px4_add_git_submodule(TARGET git_matrix PATH "src/lib/matrix")
px4_add_git_submodule(TARGET git_mavlink PATH "mavlink/include/mavlink/v1.0")
px4_add_git_submodule(TARGET git_mavlink2 PATH "mavlink/include/mavlink/v2.0")
px4_add_git_submodule(TARGET git_nuttx PATH "NuttX")
px4_add_git_submodule(TARGET git_uavcan PATH "src/modules/uavcan/libuavcan")
px4_create_git_hash_header()
#=============================================================================
message(STATUS "PX4 VERSION: ${git_tag}")
message(STATUS "CONFIG: ${target_name}")
# The URL for the elf file for crash logging
if (DEFINED ENV{BUILD_URI})
set(BUILD_URI $ENV{BUILD_URI})
else()
set(BUILD_URI "localhost")
endif()
add_definitions(-DBUILD_URI=${BUILD_URI})
# Define GNU standard installation directories
include(GNUInstallDirs)
# Add support for external project building
include(ExternalProject)
# Setup install paths
if (NOT CMAKE_INSTALL_PREFIX)
if (${OS} STREQUAL "posix")
set(CMAKE_INSTALL_PREFIX "/usr" CACHE PATH "Install path prefix" FORCE)
endif()
endif()
if (CMAKE_INSTALL_PREFIX)
message(STATUS "CMAKE_INSTALL_PREFIX: ${CMAKE_INSTALL_PREFIX}")
endif()
#=============================================================================
# require px4 module interface
set(px4_required_interface
px4_os_prebuild_targets
px4_os_add_flags
)
foreach(cmd ${px4_required_interface})
if (NOT COMMAND ${cmd})
message(FATAL_ERROR "${config_module} must implement ${cmd}")
endif()
endforeach()
set(px4_required_config config_module_list)
foreach(conf ${px4_required_config})
if (NOT DEFINED ${conf})
message(FATAL_ERROR "cmake/${config_module} must define ${conf}")
endif()
endforeach()
# force static lib build
set(BUILD_SHARED_LIBS OFF)
#=============================================================================
# ccache
#
option(CCACHE "Use ccache if available" OFF)
find_program(CCACHE_PROGRAM ccache)
if (CCACHE AND CCACHE_PROGRAM)
message(STATUS "Enabled ccache: ${CCACHE_PROGRAM}")
set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE_PROGRAM}")
endif()
#=============================================================================
# project definition
#
project(px4 CXX C ASM)
set(package-contact "px4users@googlegroups.com")
#=============================================================================
# find programs and packages
#
# see if catkin was invoked to build this
if (CATKIN_DEVEL_PREFIX)
message(STATUS "catkin ENABLED")
find_package(catkin REQUIRED)
if (catkin_FOUND)
catkin_package()
else()
message(FATAL_ERROR "catkin not found")
endif()
endif()
find_package(PythonInterp REQUIRED)
px4_find_python_module(jinja2 REQUIRED)
#=============================================================================
# cmake testing
#
enable_testing()
include(CTest)
#=============================================================================
# generate compile command database
#
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
#=============================================================================
# check required toolchain variables
#
# PX4 requires c++11
set(CMAKE_CXX_STANDARD 11)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
# PX4 requires c99
set(CMAKE_C_STANDARD 99)
set(CMAKE_C_STANDARD_REQUIRED ON)
set(required_variables CMAKE_C_COMPILER_ID CMAKE_CXX_COMPILER_ID)
foreach(var ${required_variables})
if (NOT ${var})
message(FATAL_ERROR "Toolchain/config must define ${var}")
endif()
endforeach()
# print full c compiler version
execute_process(COMMAND ${CMAKE_C_COMPILER} --version
OUTPUT_VARIABLE c_compiler_version
OUTPUT_STRIP_TRAILING_WHITESPACE
)
STRING(REGEX MATCH "[^\n]*" c_compiler_version_short ${c_compiler_version})
message(STATUS "C compiler: ${c_compiler_version_short}")
# print full c++ compiler version
execute_process(COMMAND ${CMAKE_CXX_COMPILER} --version
OUTPUT_VARIABLE cxx_compiler_version
OUTPUT_STRIP_TRAILING_WHITESPACE
)
STRING(REGEX MATCH "[^\n]*" cxx_compiler_version_short ${cxx_compiler_version})
message(STATUS "C++ compiler: ${cxx_compiler_version_short}")
#=============================================================================
# external libraries
#
px4_os_prebuild_targets(OUT prebuild_targets
BOARD ${BOARD}
THREADS ${THREADS})
#=============================================================================
# build flags
#
px4_os_add_flags(
BOARD ${BOARD}
C_FLAGS c_flags
CXX_FLAGS cxx_flags
OPTIMIZATION_FLAGS optimization_flags
EXE_LINKER_FLAGS exe_linker_flags
INCLUDE_DIRS include_dirs
LINK_DIRS link_dirs
DEFINITIONS definitions)
px4_join(OUT CMAKE_EXE_LINKER_FLAGS LIST "${exe_linker_flags}" GLUE " ")
px4_join(OUT CMAKE_C_FLAGS LIST "${c_flags};${optimization_flags}" GLUE " ")
px4_join(OUT CMAKE_CXX_FLAGS LIST "${cxx_flags};${optimization_flags}" GLUE " ")
include_directories(${include_dirs})
#message("INCLUDE_DIRS=${include_dirs}")
link_directories(${link_dirs})
add_definitions(${definitions})
#=============================================================================
# message, and airframe generation
#
include(common/px4_metadata)
add_subdirectory(msg)
px4_generate_messages(TARGET msg_gen
MSG_FILES ${msg_files}
OS ${OS}
INCLUDES ${msg_include_paths}
DEPENDS git_genmsg git_gencpp prebuild_targets
)
px4_generate_airframes_xml(BOARD ${BOARD})
#=============================================================================
# DriverFramework
#
# List the DriverFramework drivers
if (DEFINED config_df_driver_list)
message("DF Drivers: ${config_df_driver_list}")
endif()
set(df_driver_libs)
foreach(driver ${config_df_driver_list})
add_subdirectory(src/lib/DriverFramework/drivers/${driver})
list(APPEND df_driver_libs df_${driver})
message("Adding DF driver: ${driver}")
endforeach()
#=============================================================================
# external projects
#
set(ep_base ${PX4_BINARY_DIR}/external)
set_property(DIRECTORY PROPERTY EP_BASE ${ep_base})
# add external project install folders to build
link_directories(${ep_base}/Install/lib)
include_directories(${ep_base}/Install/include)
# add the directories so cmake won't warn
execute_process(COMMAND cmake -E make_directory ${ep_base}/Install/lib)
execute_process(COMMAND cmake -E make_directory ${ep_base}/Install/include)
#=============================================================================
# external modules
#
if (NOT EXTERNAL_MODULES_LOCATION STREQUAL "")
message(STATUS "External modules: ${EXTERNAL_MODULES_LOCATION}")
add_subdirectory("${EXTERNAL_MODULES_LOCATION}/src" external_modules_src)
set(config_module_list_external_expanded)
foreach(external_module ${config_module_list_external})
list(APPEND config_module_list_external_expanded
${EXTERNAL_MODULES_LOCATION}/src/${external_module})
endforeach()
set(config_module_list
${config_module_list}
${config_module_list_external_expanded}
)
endif()
#=============================================================================
# subdirectories
#
set(module_libraries)
foreach(module ${config_module_list})
string(REGEX MATCH "^[./]" external_module ${module})
if (external_module)
STRING(REGEX REPLACE "//" "/" EXT_MODULE ${module})
STRING(REGEX REPLACE "/" "__" EXT_MODULE_PREFIX ${EXT_MODULE})
add_subdirectory(${module} ${PX4_BINARY_DIR}/${EXT_MODULE_PREFIX})
else()
add_subdirectory(src/${module})
endif()
px4_mangle_name(${module} mangled_name)
list(APPEND module_libraries ${mangled_name})
endforeach()
# Keep track of external shared libs required for modules
set(module_external_libraries "${module_external_libraries}" CACHE INTERNAL "module_external_libraries")
add_subdirectory(src/firmware/${OS})
if (config_io_board)
add_subdirectory(src/modules/px4iofirmware)
endif()
#=============================================================================
# generate custom target to print for all executable and module cmake targets
#
if (all_posix_cmake_targets)
list(SORT all_posix_cmake_targets)
px4_join(OUT posix_cmake_target_list LIST ${all_posix_cmake_targets} GLUE "\\n")
add_custom_target(list_cmake_targets
COMMAND sh -c "printf \"${posix_cmake_target_list}\\n\""
COMMENT "List of cmake targets that can be matched by PX4_NO_OPTIMIZATION:"
VERBATIM
)
endif()
#=============================================================================
# packaging
#
# Important to having packaging at end of cmake file.
#
set(CPACK_PACKAGE_NAME ${PROJECT_NAME}-${CONFIG})
set(CPACK_PACKAGE_VERSION ${git_version})
set(CPACK_PACKAGE_CONTACT ${package-contact})
set(CPACK_DEBIAN_PACKAGE_SHLIBDEPS ON)
set(CPACK_DEBIAN_PACKAGE_SECTION "devel")
set(CPACK_DEBIAN_PACKAGE_PRIORITY "optional")
set(short-description "The px4 autopilot.")
set(CPACK_DEBIAN_PACKAGE_DESCRIPTION ${short-description})
set(CPACK_GENERATOR "ZIP")
set(CPACK_PACKAGE_FILE_NAME "${PROJECT_NAME}-${CONFIG}-${git_tag}")
set(CPACK_SOURCE_PACKAGE_FILE_NAME "${PROJECT_NAME}-${git_version}")
set(CPACK_SOURCE_GENERATOR "ZIP;TBZ2")
set(CPACK_PACKAGING_INSTALL_PREFIX "")
set(CPACK_SET_DESTDIR "OFF")
if ("${CMAKE_SYSTEM}" MATCHES "Linux")
find_program(DPKG_PROGRAM dpkg)
if (EXISTS ${DPKG_PROGRAM})
list (APPEND CPACK_GENERATOR "DEB")
endif()
endif()
include(CPack)
# vim: set noet fenc=utf-8 ff=unix ft=cmake :