The 7 year old and I have been trying to make various things with the HP Sprout (review soon) and Dremel Printer. I was sent review versions of both to explore and give feedback on. We've learned a lot and filed a lot of bugs and received lots of great software updates.
我7岁那年，我一直在尝试使用HP Sprout(即将进行评测)和Dremel Printer做各种各样的事情。 我收到了两者的评论版本，以进行探讨并提供反馈。 我们学到了很多东西，提交了很多错误，并且收到了很多很棒的软件更新。
About two months ago we tried 3D scanning an object using the Intel True Sense camera and manually rotating a 3D object on the HP Sprout's touch pad. I was both impressed and unimpressed with the results. Impressed because 3D Scanning is a biscuit away from straight magic. Unimpressed because it was a tedious process and the result was a little chopped up.
大约两个月前，我们尝试使用Intel True Sense摄像机进行3D扫描，然后手动旋转HP Sprout触摸板上的3D对象。 结果给我留下了深刻的印象。 之所以印象深刻，是因为3D扫描技术与纯正的魔法相距甚远。 印象深刻，因为这是一个乏味的过程，并且结果被切碎了。
But then the Spout folks sent over a "HP 3D Capture Stage" for me to try. I'll be totally honest, I thought this was going to be a cheap rotating circle, basically a Skylander's portal with a motor. I couldn't be more wrong, this thing is built like a TANK. It's actually a rotating stage split on an angle that connects via USB and allows the Sprout to angle the object between 0 and 15 degrees, however it likes. Combining this with both a 14 megapixel camera AND an Intel RealSense Depth Camera, the results are significantly better than my first attempts.
但是后来Spout员工发送了“ HP 3D Capture Stage”供我尝试。 老实说，我认为这将是一个廉价的旋转圈子，基本上是Skylander的带有电机的门户。 我没错，这东西就像坦克一样。 它实际上是一个旋转的载物台，其角度通过USB连接，允许发芽将对象倾斜0到15度之间，但它喜欢。 将其与14百万像素的摄像头和Intel RealSense深度摄像头结合使用，结果明显比我的初次尝试要好。
The HP 3D Capture Stage is $299 by itself, which is admittedly not an impulse purchase. The price point that I'm impressed with though is the "Sprout 3D Maker's Bundle" which includes the HP Sprout itself (no slouch with an i7 and 8 gigs, stylus, and 23" touchscreen + 20" second screen/touch mat) AND the 3D Capture Stage AND a Dremel 3D Printer all for $2999. (US$3k) That's the Sprout with the Dremel Printer and the Capture Stage is free, essentially.
HP 3D Capture Stage本身的价格是299美元，这不是冲动购买。 我印象深刻的价格是“ Sprout 3D Maker的捆绑包”，其中包括HP Sprout本身( i7和8 gig ，手写笔和23英寸触摸屏+ 20英寸第二个屏幕/触摸垫的价格不菲)和3D Capture Stage和Dremel 3D Printer的价格均为2999美元。 (3,000美元)这就是Dremel打印机的新芽，而Capture Stage实际上是免费的。
ASIDE: It blows my mind that I got a loan from the bank and paid $2,800 for a 486DX/33 in 1990 and today I can get something like a Sprout AND 3D Scanner AND Printer for about the same. Seriously, Star Trek: The Next Generation is coming. Throw in an Oculus or a HoloLens and we're living in the future.
旁白：令我惊讶的是，我在1990年从银行获得了一笔贷款，并花了2800美元购买了486DX / 33，而今天，我可以得到类似Sprout AND 3D Scanner AND Printer的东西。 认真地说，《星际迷航：下一代》来了。 放入Oculus或HoloLens，我们将生活在未来。
OK, first things first. Can you scan an object, get a perfect model, then 3D print the same object? Essentially photocopying/xeroxing 3D objects? No.
好，首先您可以扫描一个物体，得到一个完美的模型，然后3D打印相同的物体吗？ 本质上是对3D对象进行影印/干燥？ 没有。
But you can get a VERY nice 3D model of a real physical object in just a few minutes and then export it to your favorite app for manipulation.
但是您仅需几分钟即可获得一个非常好的真实物理对象3D模型，然后将其导出到您喜欢的应用程序中进行操作。
Here's my FIRST scan where I sat for 15 minutes and rotated a teapot 15 degrees each time the computer told me to. Not so good. And I was VERY careful and accurate, I thought.
这是我的第一次扫描，我坐了15分钟，每次计算机告诉我旋转茶壶15度。 不太好。 我想，我非常仔细和准确。
Here's the SAME teapot on the 3D Capture Stage. I used the supplied putty to gently stick the object on the stage at an angle.
这是3D Capture Stage上的SAME茶壶。 我用随附的油灰轻轻地将物体倾斜固定在舞台上。
Here's a video of the start of the process. It's totally automated, but after you're done if you feel the object wasn't completely represented you can put it on its side or flip it over to get occluded sides.
这是该过程开始的视频。 它是完全自动化的，但是完成后，如果您觉得该对象未完全代表，则可以将其放在侧面或将其翻转以遮挡住侧面。
I did scans a total of 3 times and got this auto-merged result. While the lettering got blurred after the second scan, the general structure of the teapot is 95% correct.
我总共扫描了3次，并得到了自动合并的结果。 尽管第二次扫描后字母变得模糊，但茶壶的总体结构正确率为95％。
I exported it into the Microsoft 3D Builder Software and got this result.
我将其导出到Microsoft 3D Builder软件中并获得了此结果。
A 3D scanned Teapot using the HP Sprout 3D Capture Stage 使用HP Sprout 3D Capture Stage进行3D扫描的茶壶
It's also worth noting that the 3D scanned object and the textures are totally separate now, so if I wanted to make a red wooden teapot from this scan, I could.
还值得注意的是，现在3D扫描的对象和纹理已完全分开，因此，如果我想从该扫描中制作一个红色的木制茶壶，则可以。
Additionally, if I wanted it to be empty (like a real teapot) and have a top that could come off, I'd want to spend some time with this 3D Scan in a 3D modeling tool and actually DO THAT. ;)
另外，如果我希望它是空的(像一个真正的茶壶)并且顶部可能会掉下来，我想花一些时间在3D建模工具中进行此3D扫描，然后实际进行操作。 ;)
The 3D Scanning Stage could be a great way for a burgeoning game designer to collect unusual objects, obtain textures and texture maps, and really jumpstart a 3D model.
3D扫描阶段可能是新兴的游戏设计师收集不寻常物体，获取纹理和纹理贴图并真正启动3D模型的好方法。
So far the whole thing has been amazing. The software has been continually updated, and while it's not perfect, it's definitely cool. My kids of been doing 2D stop-motion animation and my wife has been using it for scrapbooking.
到目前为止，整个过程都很棒。 该软件一直在不断更新，虽然并不完美，但绝对是很酷的。 我的孩子们一直在进行2D定格动画，而我的妻子一直在使用它进行剪贴。
A full review and YouTube Video is coming soon, but so far I can tell you that the HP Sprout is not just a fantastic "Kitchen PC" and a "Maker PC" but I could really see it being my family's primary computer. That said, the real place it shines is in education. I'd love it if my kids had a complete PC/scanner/printer combo available to them in their classroom.
完整的评论和YouTube视频即将推出，但是到目前为止，我可以告诉您HP Sprout不仅是出色的“厨房PC”和“ Maker PC”，而且我真的可以看到它是我家庭的主要计算机。 也就是说，它真正闪耀的地方是教育。 如果我的孩子在教室里有一个完整的PC /扫描仪/打印机组合，我会喜欢的。
翻译自: https://www.hanselman.com/blog/review-3d-scanning-with-the-hp-3d-capture-stage-on-the-hp-sprout-pc
扫一扫
2万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
