Ubuntu中设置分辨率时发现只有640x480和1024x768两个选项,在网上搜索了一下可以使用命令xrandr去设置,可是我执行该命令却出现了
“xrandr: Failed to get size of gamma for output default”
在网上看到了别人的解决办法,写一个配置文件然后重启就可以选择更多的分辨率了。摘取了原文一部分内容。原文地址点击打开链接
When I am trying to increase my Guest OS resolution to 1290X1080, while tried following steps mentioned HERE. Prior to that I was able to change the resolution by the above mentioned steps, but after a update to CENTOS 6.5 to 6.6, I am facing this error.Lots of people are having the same problem, but no solution I could not get my issue resolved.
I am able to get it solve to some extent by editing(creating) xorg.conf file in /etc/X11/ , the file code I am sharing below
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 28.0 - 70.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "VMware SVGA"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1080_60.00"
EndSubSection
EndSection