STM32F0系列用timer控制ADC采样，然后DMA传输到Memory或者DAC

uint16_t  RegularConvData_Tab[32];

void ADC1_DMA_Config(void)

{
  ADC_InitTypeDef     ADC_InitStructure;
  GPIO_InitTypeDef    GPIO_InitStructure;
  DMA_InitTypeDef   DMA_InitStructure;
  /* ADC1 DeInit */  
  ADC_DeInit(ADC1);
  
  /* GPIOC Periph clock enable */
  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
  
   /* ADC1 Periph clock enable */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
  
  /* DMA1 clock enable */
  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1 , ENABLE);
  
  /* Configure ADC Channel2 as analog input */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2 ;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
  GPIO_Init(GPIOA, &GPIO_InitStructure);
  
  /* DMA1 Channel1 Config */
  DMA_DeInit(DMA1_Channel1);
  DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)ADC1_DR_Address;
  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)RegularConvData_Tab;
  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
  DMA_InitStructure.DMA_BufferSize = 32;
  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
  DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
  DMA_Init(DMA1_Channel1, &DMA_InitStructure);
  /* DMA1 Channel1 enable */
  DMA_Cmd(DMA1_Channel1, ENABLE);

  /*DMA传输完成中断使能*/

  DMA_ITConfig(DMA1_Channel1, DMA_IT_TC, ENABLE)

  /* ADC DMA request in circular mode */
  ADC_DMARequestModeConfig(ADC1, ADC_DMAMode_Circular);
  
  /* Enable ADC_DMA */
  ADC_DMACmd(ADC1, ENABLE);  
  
  /* Initialize ADC structure */
  ADC_StructInit(&ADC_InitStructure);
  
  /* Configure the ADC1 in continous mode withe a resolutuion equal to 12 bits  */
  ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE; 
  ADC_InitStructure.ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None;
  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
  ADC_InitStructure.ADC_ScanDirection = ADC_ScanDirection_Backward;
  ADC_Init(ADC1, &ADC_InitStructure); 


  /* Convert the ADC1 Channel 1 with 71.5 Cycles as sampling time */ 
  ADC_ChannelConfig(ADC1, ADC_Channel_2 , ADC_SampleTime_71_5Cycles);   
  
  /* ADC Calibration */
  ADC_GetCalibrationFactor(ADC1);
  
  /* Enable ADC1 */
  ADC_Cmd(ADC1, ENABLE);     
  
  /* Wait the ADCEN falg */
  while(!ADC_GetFlagStatus(ADC1, ADC_FLAG_ADEN)); 
  
  /* ADC1 regular Software Start Conv */ 
  ADC_StartOfConversion(ADC1);

}

void DMA1_Channel1_IRQHandler()
{
uint8_t i = 0;
if(DMA_GetITStatus(DMA1_IT_TC1) != RESET)
{
DMA_ClearITPendingBit(DMA1_IT_TC1);
for(i=0;i<32;i++)
{
printf("%d\n",(RegularConvData_Tab[i]-2048));
}
}
}

首先贴段代码，这是ADC和DMA的初始化函数。上面代码实现的功能是ADC采样之后通过DMA方式把采样数据放入Memory ，即程序中定义的数组RegularConvData_Tab[32]。

几点需要注意的参数：

1、DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)RegularConvData_Tab;

2、DMA_InitStructure.DMA_Memo