GD32F4xx 定时器 TIMER

GD32F4xx 定时器 TIMER的设置

定时器含有可编程的一个无符号计数器，支持输入捕获和输出比较，分为五种类型：

高级定时 器(TIMERx, x=0, 7)，

通用定时器L0(TIMERx, x=1, 2, 3, 4)，

通用定时器L1(TIMERx, x=8, 11)，

通用定时器L2(TIMERx, x=9, 10, 12, 13)，

基本定时器(TIMERx, x=5, 6)，

不同类型的定时器具 体功能有所差别。

1.外设寄存器说明

2./* initialize TIMER0 */

timer_parameter_struct timer_initpara; timer_initpara.prescaler = 107;

timer_initpara.alignedmode = TIMER_COUNTER_EDGE;

timer_initpara.counterdirection = TIMER_COUNTER_UP;

timer_initpara.period = 999;

timer_initpara.clockdivision = TIMER_CKDIV_DIV1;

timer_initpara.repetitioncounter = 1;

timer_init(TIMER0, &timer_initpara);

3./* enable the TIMER0 update interrupt */

timer_interrupt_enable (TIMER0, TIMER_INT_UP);

4./* clear TIMER0 update interrupt flag */

timer_interrupt_flag_clear (TIMER0, TIMER_INT_FLAG_UP);

5./* enable TIMER0 */

timer_enable (TIMER0);

6./* enable the TIMER0 auto reload shadow function */

timer_auto_reload_shadow_enable (TIMER0);                //自动重载

timer1 例子：

void timer_config(void)
{
//    timer_oc_parameter_struct timer_ocintpara;
    timer_parameter_struct timer_initpara;
//    timer_break_parameter_struct timer_breakpara;

    rcu_periph_clock_enable(RCU_TIMER1);
    rcu_timer_clock_prescaler_config(RCU_TIMER_PSC_MUL4);
        //timer_struct_para_init(&timer_initpara);
    timer_deinit(TIMER1);

    /* TIMER1 configuration */
    timer_initpara.prescaler         = (1200/6-1);                // TIMER1CLK = SystemCoreClock /120  */
    timer_initpara.alignedmode       = TIMER_COUNTER_EDGE;
    timer_initpara.counterdirection  = TIMER_COUNTER_UP;
    timer_initpara.period            = 999;                // TIMER1CLK/600
    timer_initpara.clockdivision     = TIMER_CKDIV_DIV1;
    timer_initpara.repetitioncounter = 0;
    timer_init(TIMER1,&timer_initpara);

            /* auto-reload preload enable */
        timer_auto_reload_shadow_enable(TIMER1);        
        /* interrupt */
        timer_interrupt_enable(TIMER1,TIMER_INT_UP);
            
    /* TIMER1 counter enable */
    timer_enable(TIMER1);
        
   // nvic_priority_group_set(NVIC_PRIGROUP_PRE1_SUB3);
    nvic_irq_enable(TIMER1_IRQn, 0, 5);        

}

void TIMER1_IRQHandler(void)
{
    /* clear TIMER interrupt flag */
    timer_interrupt_flag_clear(TIMER1,TIMER_INT_TRG);
    timer_interrupt_flag_clear(TIMER1,TIMER_INT_UP);

     {

        用户程序

        }   

}