PM510V16 PM511V08 PM511V16 3BSE011181R1 模块

PM511V08 PM511V16（正面为PM511V）无跳线-这是控制器的处理器模块。从功能角度来看，在线更换单个模块当然是不可能的。但是，无需关闭电源。第5.5.10.2节“冗余处理器模块的更换-附录a中所述的模块”中对冗余处理器模块进行了说明。

当冗余处理器模块出现故障时，系统将失去DUAL状态并变为单个。两个处理器模块上的DUAL LED将熄灭。为了恢复冗余，请按照以下方式尽快更换故障单元：

1。不要忘记阅读第5.5.6节“安全规定”。

2.小心，不要触摸可能处于完全工作状态的主模块。

3.检查程序卡是否正确就位。系统软件将从程序卡加载到替换处理器模块中。

4.拔出故障模块。牢牢抓住模块，快速果断地取出。使用两个手柄。

5.检查它的修订号。更换模块的修订号必须相同或更高。Delivery Binder中包含的文档Release Notes说明了哪些处理器模块可以在冗余对中工作，哪些不能。例如，您不能混合使用8和16兆字节版本。

6.通过将其启动模式选择器置于位置2（STOP）来准备更换模块。

7.小心插入新模块，不要碰到后平面触点。确保模块在子框的导轨中滑动。

8.快速果断地推入新模块。

9.这个新的处理器模块现在成为备份。数字显示屏将显示-3（STOPPED）。

10.将备用模块的启动模式选择器设置到与主模块相同的位置。

11.按下备份模块上的ENTER（输入）按钮。

12.系统现在将升级为DUAL。几秒钟后，两个处理器模块上的DUAL LED将点亮，备份模块的编号显示将显示b1。

13.将提取的模块存储在导电塑料的外壳中。

DCS control measurement range
The control measurement scope includes various functional sugar business units and high fructose syrup workshops within the factory area, functional sugar platforms, and sewage treatment stations. The main control and measurement system adopts DCS, and the DCS operator stations and engineer stations in each workshop are connected to each other through a standard network. Other complete sets of equipment and random control systems are connected to this network through communication buses. The upper computer located in the central control room can monitor, schedule, and manage the entire production process through the entire plant communication network. A television monitoring system for the entire plant is installed in the central control room, It can intuitively and vividly understand the various processes of production. At the same time, the monitoring data of the automatic control system takes the shift as the effective period, and corresponding monitoring interfaces are compiled or collected to extract online production data, which is transmitted to the company's general information platform in a standardized form to provide real-time production supervision.

By monitoring energy, power, and water supply and drainage systems to achieve more precise production control, the average energy savings are around 5%; By monitoring the total discharge and COD of wastewater online, waste generation can be reduced, wastewater treatment efficiency can be optimized, wastewater discharge can be effectively reduced, and wastewater treatment capacity can be improved by more than 25%.

The informatization of production process control, through online monitoring of data by the system, avoids the loss of raw materials in production, reduces the rate of non-conforming products by 3% to 5%, improves labor productivity, and improves product quality.

Control scheme for automatic control and measurement systems
Each workshop adopts a centralized control method: that is, each workshop has a centralized control room to conduct centralized testing, control, and management of the production process flow. The workshop control room mainly monitors and controls the liquid level of each storage tank, including temperature, pH value, flow rate, conductivity control, membrane separation, chromatography separation, and other process parameters during liquefaction, saccharification, purification, decolorization, ionization, isomerization, etc., in order to achieve automation of each process and the entire process; The control and measurement systems for the above process processes all use DCS. The central control room is located in the comprehensive building, facilitating management personnel to grasp the production situation and dispatch and command the production process.