AC880PEC PPD113 3BHE023784R2330支持多达36条双向光纤PowerLink

AC 800PEC PPD113 3BE023784R2330是一种模块化高速控制系统，设计用于基于所需I/O配置和特定过程的灵活配置。该系统性能卓越，处理速度极高，支持多达36条双向光纤PowerLink。

主要功能：
模块化配置：
单元根据所需的I/O配置和流程进行排列。
模块通过可选的高速点对点连接进行连接。
该系统最多支持36个双向光纤PowerLink。

表演
非常快速的模拟和数字过程I/O，典型的循环时间为25µs。
在一个控制器中实现快速闭环控制和常规过程逻辑。
典型循环时间为10ms的低速I/O。
非常快速的模拟/数字转换和直接在外围I/O模块上进行标称/实际值比较。

连通性
两个以太网端口，用于连接到工厂控制网络、其他处理器模块、control Builder M编程工具和PECView服务工具。
用于本地过程面板和/或服务终端的RS-232/RS-422串行端口。
最多两个板载AnyIO端口，用于ABB通信扩展总线（CEX）和AnyBus®-S模块，用于所有常见的现场总线类型。
多达36个用于光PowerLinks和ABB S800光模块总线的端子，可实现与I/O系统和功率转换器的经济高效、抗噪声连接。

表达
用于连接到工厂控制网络的以太网端口。
用于本地过程面板和/或服务终端的RS-232/RS-422串行端口。
车载AnyIO端口，用于ABB通信扩展总线（CEX）和AnyBus®-S模块。

模块化配置：
安装在DIN导轨上或配备用于直接壁装的装置。
硬件和通信模块根据流程需求进行配置。
本地和远程安装的快速和慢速I/O、大型和小型拓扑的任何组合。
该系统的模块化设计和高速功能使其适用于精确控制和快速处理时间至关重要的广泛工业应用。如果您对AC 800PEC的任何方面有具体问题或需要更多详细信息，请随时询问。

The AC 800PEC PPD113 3BHE023784R2330 is a modular high-speed control system designed for flexible configurations based on the required I/O configuration and the specific process. The system excels in performance with a very high processing speed and supports up to 36 bi-directional fiber-optic PowerLinks.

Key Features:

1. Modular Configuration:

   • Units are arranged according to the required I/O configuration and the process.
   • Modules are connected via optional high-speed point-to-point connections.
   • The system supports up to 36 bi-directional fiber-optic PowerLinks.

2. Performance:

   • Very fast analog and digital process I/Os with a typical cycle time of 25 µs.
   • Fast closed-loop control and regular process logic implemented in one controller.
   • Low-speed I/Os with a typical cycle time of 10 ms.
   • Very fast analog/digital conversion and nominal/actual value comparison directly on the peripheral I/O module.

3. Connectivity:

   • Two Ethernet ports for connection to a plant control network, other processor modules, the Control Builder M programming tool, and the PECView service tool.
   • RS-232/RS-422 serial ports for a local process panel and/or service terminal.
   • Up to two on-board AnyIO ports for ABB Communications Expansion bus (CEX) and AnyBus®-S modules for all common fieldbus types.
   • Up to 36 terminals for optical PowerLinks and ABB S800 optical ModuleBus for cost-effective, noise-immune connections to I/O systems and power converters.

4. Communication:

   • Ethernet ports for connection to a plant control network.
   • RS-232/RS-422 serial ports for a local process panel and/or service terminal.
   • On-board AnyIO ports for ABB Communications Expansion bus (CEX) and AnyBus®-S modules.

5. Modular Configuration:

   • Units mounted onto a DIN rail or equipped for direct wall mounting.
   • Hardware and communication modules are configured based on process needs.
   • Any combination of fast and slow I/Os, large and small topologies, installed locally and remotely.

The system's modular design and high-speed capabilities make it suitable for a wide range of industrial applications where precise control and fast processing times are crucial. If you have specific questions or need more details about any aspect of the AC 800PEC, feel free to ask.