PCD230 3BHE022291R0101满足各种行业的电力电子控制需求

AC 800PEC PCD230 3BE022291R0101系统硬件旨在满足过程控制中的挑战性要求，提供广泛的I/O模块，以满足各种行业的电力电子控制需求，如过程、发电、配电、运输和牵引。

关键组件：
模块化设计：
模块化、节能设计，无需强制冷却即可运行。
I/O模块安装在标准DIN导轨上，可以很容易地安装在分布式进程中。

连接和通信：
可直接连接的I/O系统的数量仅受到处理器的最大可用光纤链路（36个双向链路）的限制。
根据性能要求，模块之间可以使用单个、多个或冗余双向链路。

控制器组件：
AC 800PEC控制器PCD230 3BHE022291R0101：包含高可靠性的低功率电路。硬件配置是灵活的，取决于过程要求和与上层控制的通信。

AC 800PEC Combi IO：
用于快速信号交换。

S800 I/O模块：
用于低速信号交换。

AC 800PEC INT接口系统：
用于直接IGCT（集成栅极整流晶闸管）转换器控制。

控制器模块组件：
基本单元AC 800PEC BP：带有插槽的背板，用于安装处理器、电源、光学和通信模块。
处理器模块AC 800PEC CPU：采用功能齐全的600 MHz RISC处理器和64位IEEE浮点单元（FPU），针对控制周期非常快的应用进行了优化。

两个AnyIO接口：每个接口由一个AnyBus®-S插槽和一个额外的AnyIO扩展插槽组成，用于AC 800PEC CEX接口或特殊应用程序。

最多6个AC 800PEC光学模块：用于连接到各种I/O模块的光纤链路。
AC 800PEC控制器模块集成了处理器、与外围I/O的光学接口、现场总线以及与上部控制的接口。它提供了硬件配置的灵活性，适用于需要精确控制和快速处理时间的应用。如果您对AC 800PEC硬件的任何方面有具体问题或需要更多详细信息，请随时询问。

The AC 800PEC PCD230 3BHE022291R0101  system hardware is designed to meet challenging requirements in process control, offering a wide range of I/O modules to cover power electronics control needs in various industries such as process, power generation, distribution, transportation, and traction.

Key Components:

1. Modular Design:

   • Modular, energy-efficient design for operation without forced cooling.
   • I/O modules are mounted on standard DIN rails and can be easily installed in distributed processes.

2. Connectivity and Communication:

   • The number of directly connectable I/O systems is limited only by the maximum available fiber-optic links to the processor (36 bidirectional links).
   • Single, multiple, or redundant bidirectional links can be used between modules based on performance requirements.

3. Controller Components:

   • AC 800PEC Controller PCD230 3BHE022291R0101 : Comprises a low-power circuit with high reliability. The hardware configuration is flexible, depending on process requirements and communication with the upper control.

4. AC 800PEC Combi IO:

   • Used for fast signal exchange.

5. S800 I/O Modules:

   • Used for low-speed signal exchange.

6. AC 800PEC INT Interface System:

   • Used for direct IGCT (Integrated Gate-Commuted Thyristor) converter control.

7. Controller Module Components:

   • Base unit AC 800PEC BP: Backplane with slots for mounting the processor, power supply, and optical and communication modules.
   • Processor module AC 800PEC CPU: Features a fully-featured 600 MHz RISC processor with a 64-bit IEEE Floating-Point-Unit (FPU), optimized for applications with very fast control cycles.
   • Two AnyIO interfaces: Each consisting of an AnyBus®-S slot and an additional AnyIO extension slot for an AC 800PEC CEX interface or special applications.
   • Up to 6 AC 800PEC optical modules: Used for fiber-optic links to various I/O modules.

The AC 800PEC controller module integrates the processor, optical interfaces to peripheral I/O, fieldbus, and interfaces to the upper control. It offers flexibility in hardware configuration, making it suitable for applications requiring precise control and fast processing times. If you have specific questions or need more details about any aspect of the AC 800PEC hardware, feel free to ask.