S-073N 3BHB009884R0021主处理器单元中的硬件错误会触发正确的转换过程

S-073N 3BHB009884R0021所提供的信息概述了具有两个处理器单元的系统的冗余和操作。以下是摘要：

S-073N 3BHB009884R0021系统操作和冗余：
该系统最初在没有冗余的情况下运行，只有一个处理器单元在运行。
可以在系统运行时更换出现故障的处理器单元，从而恢复冗余。
备份单元中的错误可以在系统运行时通过更换单元来纠正。
备份单元中的错误不会影响主单元的操作，因为它们在逻辑上是分开的。
主处理器单元中的硬件错误会触发正确的转换过程。
应用程序编程和通信不受冗余操作的影响。

S-073N 3BHB009884R0021串行端口COM3：
在冗余CPU配置中，不能使用串行端口COM3。

S-073N 3BHB009884R0021 S800 I/O单元的连接：
S800 I/O单元通过光模块总线连接到两个CPU。
基板上的内置电气模块总线不能用于冗余CPU配置中的S800 I/O连接。
总体而言，该系统通过冗余确保连续运行和容错，S-073N 3BHB009884R0021 同时保持主单元和备份单元之间的分离。它还概述了在冗余配置中使用某些端口和连接的限制。

The provided information outlines the redundancy and operation of a system with two processor units. Here's a summary:

1. System Operation and Redundancy:

   • The system initially operates without redundancy with only one processor unit in operation.
   • Malfunctioning processor units can be replaced while the system is running, restoring redundancy.
   • Errors in the backup unit can be rectified by replacing the unit while the system is operational.
   • Errors in the backup unit do not affect the primary unit's operation, as they are logically separated.
   • Hardware errors in the primary processor unit trigger a correct changeover process.
   • Application programming and communication remain unaffected by redundancy operations.

2. Serial Port COM3:

   • In redundant CPU configurations, the serial port COM3 cannot be utilized.

3. Connection of S800 I/O Units:

   • S800 I/O units are connected to both CPUs via the optical ModuleBus.
   • The built-in electrical ModuleBus on the base plates cannot be used for S800 I/O connection in redundant CPU configurations.

Overall, the system ensures continuous operation and fault tolerance through redundancy while maintaining separation between primary and backup units. It also outlines restrictions regarding the usage of certain ports and connections in redundant configurations.