NNDL 作业6：基于CNN的XO识别

最新推荐文章于 2024-06-01 23:35:30 发布

叶雨柳光

最新推荐文章于 2024-06-01 23:35:30 发布

阅读量522

点赞数 1

文章标签： cnn 深度学习 python

本文链接：https://blog.csdn.net/m0_56164577/article/details/127479794

版权

在这里插入图片描述

一、实现卷积-池化-激活

1. Numpy版本：手工实现卷积-池化-激活

自定义卷积算子、池化算子实现

import numpy as np

# 初始化一张X图片矩阵
x = np.array([[-1, -1, -1, -1, -1, -1, -1, -1, -1],
              [-1, 1, -1, -1, -1, -1, -1, 1, -1],
              [-1, -1, 1, -1, -1, -1, 1, -1, -1],
              [-1, -1, -1, 1, -1, 1, -1, -1, -1],
              [-1, -1, -1, -1, 1, -1, -1, -1, -1],
              [-1, -1, -1, 1, -1, 1, -1, -1, -1],
              [-1, -1, 1, -1, -1, -1, 1, -1, -1],
              [-1, 1, -1, -1, -1, -1, -1, 1, -1],
              [-1, -1, -1, -1, -1, -1, -1, -1, -1]])
# 输出原矩阵
print("x=\n", x)
# 初始化 三个 卷积核
Kernel = [[0 for i in range(0, 3)] for j in range(0, 3)]
# 参考图卷积核1
Kernel[0] = np.array([[1, -1, -1],
                      [-1, 1, -1],
                      [-1, -1, 1]])
# 参考图卷积核2
Kernel[1] = np.array([[1, -1, 1],
                      [-1, 1, -1],
                      [1, -1, 1]])
# 参考图卷积核3
Kernel[2] = np.array([[-1, -1, 1],
                      [-1, 1, -1],
                      [1, -1, -1]])

# --------------- 卷积  ---------------
stride = 1  # 步长
feature_map_h = 7  # 特征图的高
feature_map_w = 7  # 特征图的宽
feature_map = [0 for i in range(0, 3)]  # 初始化3个特征图
for i in range(0, 3):
    feature_map[i] = np.zeros((feature_map_h, feature_map_w))  # 初始化特征图
for h in range(feature_map_h):  # 向下滑动，得到卷积后的固定行
    for w in range(feature_map_w):  # 向右滑动，得到卷积后的固定行的列
        v_start = h * stride  # 滑动窗口的起始行（高）
        v_end = v_start + 3  # 滑动窗口的结束行（高）
        h_start = w * stride  # 滑动窗口的起始列（宽）
        h_end = h_start + 3  # 滑动窗口的结束列（宽）
        window = x[v_start:v_end, h_start:h_end]  # 从图切出一个滑动窗口
        for i in range(0, 3):
            feature_map[i][h, w] = np.divide(np.sum(np.multiply(window, Kernel[i][:, :])), 9)
print("feature_map:\n", np.around(feature_map, decimals=2))

# --------------- 池化  ---------------
pooling_stride = 2  # 步长
pooling_h = 4  # 特征图的高
pooling_w = 4  # 特征图的宽
feature_map_pad_0 = [[0 for i in range(0, 8)] for j in range(0, 8)]
for i in range(0, 3):  # 特征图 补 0 ，行 列 都要加 1 (因为上一层是奇数，池化窗口用的偶数)
    feature_map_pad_0[i] = np.pad(feature_map[i], ((0, 1), (0, 1)), 'constant', constant_values=(0, 0))
# print("feature_map_pad_0 0:\n", np.around(feature_map_pad_0[0], decimals=2))

pooling = [0 for i in range(0, 3)]
for i in range(0, 3):
    pooling[i] = np.zeros((pooling_h, pooling_w))  # 初始化特征图
for h in range(pooling_h):  # 向下滑动，得到卷积后的固定行
    for w in range(pooling_w):  # 向右滑动，得到卷积后的固定行的列
        v_start = h * pooling_stride  # 滑动窗口的起始行（高）
        v_end = v_start + 2  # 滑动窗口的结束行（高）
        h_start = w * pooling_stride  # 滑动窗口的起始列（宽）
        h_end = h_start + 2  # 滑动窗口的结束列（宽）
        for i in range(0, 3):
            pooling[i][h, w] = np.max(feature_map_pad_0[i][v_start:v_end, h_start:h_end])
print("pooling:\n", np.around(pooling[0], decimals=2))
print("pooling:\n", np.around(pooling[1], decimals=2))
print("pooling:\n", np.around(pooling[2], decimals=2))


# --------------- 激活  ---------------
def relu(x):
    return (abs(x) + x) / 2


relu_map_h = 7  # 特征图的高
relu_map_w = 7  # 特征图的宽
relu_map = [0 for i in range(0, 3)]  # 初始化3个特征图
for i in range(0, 3):
    relu_map[i] = np.zeros((relu_map_h, relu_map_w))  # 初始化特征图

for i in range(0, 3):
    relu_map[i] = relu(feature_map[i])

print("relu map :\n", np.around(relu_map[0], decimals=2))
print("relu map :\n", np.around(relu_map[1], decimals=2))
print("relu map :\n", np.around(relu_map[2], decimals=2))

C:\Users\74502\ven\Scripts\python.exe C:/Users/74502/PycharmProjects/pythonProject/fdh.py
x=
 [[-1 -1 -1 -1 -1 -1 -1 -1 -1]
 [-1  1 -1 -1 -1 -1 -1  1 -1]
 [-1 -1  1 -1 -1 -1  1 -1 -1]
 [-1 -1 -1  1 -1  1 -1 -1 -1]
 [-1 -1 -1 -1  1 -1 -1 -1 -1]
 [-1 -1 -1  1 -1  1 -1 -1 -1]
 [-1 -1  1 -1 -1 -1  1 -1 -1]
 [-1  1 -1 -1 -1 -1 -1  1 -1]
 [-1 -1 -1 -1 -1 -1 -1 -1 -1]]
feature_map:
 [[[ 0.78 -0.11  0.11  0.33  0.56 -0.11  0.33]
  [-0.11  1.   -0.11  0.33 -0.11  0.11 -0.11]
  [ 0.11 -0.11  1.   -0.33  0.11 -0.11  0.56]
  [ 0.33  0.33 -0.33  0.56 -0.33  0.33  0.33]
  [ 0.56 -0.11  0.11 -0.33  1.   -0.11  0.11]
  [-0.11  0.11 -0.11  0.33 -0.11  1.   -0.11]
  [ 0.33 -0.11  0.56  0.33  0.11 -0.11  0.78]]

 [[ 0.33 -0.56  0.11 -0.11  0.11 -0.56  0.33]
  [-0.56  0.56 -0.56  0.33 -0.56  0.56 -0.56]
  [ 0.11 -0.56  0.56 -0.78  0.56 -0.56  0.11]
  [-0.11  0.33 -0.78  1.   -0.78  0.33 -0.11]
  [ 0.11 -0.56  0.56 -0.78  0.56 -0.56  0.11]
  [-0.56  0.56 -0.56  0.33 -0.56  0.56 -0.56]
  [ 0.33 -0.56  0.11 -0.11  0.11 -0.56  0.33]]

 [[ 0.33 -0.11  0.56  0.33  0.11 -0.11  0.78]
  [-0.11  0.11 -0.11  0.33 -0.11  1.   -0.11]
  [ 0.56 -0.11  0.11 -0.33  1.   -0.11  0.11]
  [ 0.33  0.33 -0.33  0.56 -0.33  0.33  0.33]
  [ 0.11 -0.11  1.   -0.33  0.11 -0.11  0.56]
  [-0.11  1.   -0.11  0.33 -0.11  0.11 -0.11]
  [ 0.78 -0.11  0.11  0.33  0.56 -0.11  0.33]]]
pooling:
 [[1.   0.33 0.56 0.33]
 [0.33 1.   0.33 0.56]
 [0.56 0.33 1.   0.11]
 [0.33 0.56 0.11 0.78]]
pooling:
 [[0.56 0.33 0.56 0.33]
 [0.33 1.   0.56 0.11]
 [0.56 0.56 0.56 0.11]
 [0.33 0.11 0.11 0.33]]
pooling:
 [[0.33 0.56 1.   0.78]
 [0.56 0.56 1.   0.33]
 [1.   1.   0.11 0.56]
 [0.78 0.33 0.56 0.33]]
relu map :
 [[0.78 0.   0.11 0.33 0.56 0.   0.33]
 [0.   1.   0.   0.33 0.   0.11 0.  ]
 [0.11 0.   1.   0.   0.11 0.   0.56]
 [0.33 0.33 0.   0.56 0.   0.33 0.33]
 [0.56 0.   0.11 0.   1.   0.   0.11]
 [0.   0.11 0.   0.33 0.   1.   0.  ]
 [0.33 0.   0.56 0.33 0.11 0.   0.78]]
relu map :
 [[0.33 0.   0.11 0.   0.11 0.   0.33]
 [0.   0.56 0.   0.33 0.   0.56 0.  ]
 [0.11 0.   0.56 0.   0.56 0.   0.11]
 [0.   0.33 0.   1.   0.   0.33 0.  ]
 [0.11 0.   0.56 0.   0.56 0.   0.11]
 [0.   0.56 0.   0.33 0.   0.56 0.  ]
 [0.33 0.   0.11 0.   0.11 0.   0.33]]
relu map :
 [[0.33 0.   0.56 0.33 0.11 0.   0.78]
 [0.   0.11 0.   0.33 0.   1.   0.  ]
 [0.56 0.   0.11 0.   1.   0.   0.11]
 [0.33 0.33 0.   0.56 0.   0.33 0.33]
 [0.11 0.   1.   0.   0.11 0.   0.56]
 [0.   1.   0.   0.33 0.   0.11 0.  ]
 [0.78 0.   0.11 0.33 0.56 0.   0.33]]

进程已结束，退出代码为 0

2. Pytorch版本：调用函数实现卷积-池化-激活

调用框架自带算子实现，对比自定义算子

import torch
import torch.nn as nn
 
x = torch.tensor([[[[-1, -1, -1, -1, -1, -1, -1, -1, -1],
                    [-1, 1, -1, -1, -1, -1, -1, 1, -1],
                    [-1, -1, 1, -1, -1, -1, 1, -1, -1],
                    [-1, -1, -1, 1, -1, 1, -1, -1, -1],
                    [-1, -1, -1, -1, 1, -1, -1, -1, -1],
                    [-1, -1, -1, 1, -1, 1, -1, -1, -1],
                    [-1, -1, 1, -1, -1, -1, 1, -1, -1],
                    [-1, 1, -1, -1, -1, -1, -1, 1, -1],
                    [-1, -1, -1, -1, -1, -1, -1, -1, -1]]]], dtype=torch.float)
print(x.shape)
print(x)
 
print("--------------- 卷积  ---------------")
conv1 = nn.Conv2d(1, 1, (3, 3), 1)  # in_channel , out_channel , kennel_size , stride
conv1.weight.data = torch.Tensor([[[[1, -1, -1],
                                    [-1, 1, -1],
                                    [-1, -1, 1]]
                                   ]])
conv2 = nn.Conv2d(1, 1, (3, 3), 1)  # in_channel , out_channel , kennel_size , stride
conv2.weight.data = torch.Tensor([[[[1, -1, 1],
                                    [-1, 1, -1],
                                    [1, -1, 1]]
                                   ]])
conv3 = nn.Conv2d(1, 1, (3, 3), 1)  # in_channel , out_channel , kennel_size , stride
conv3.weight.data = torch.Tensor([[[[-1, -1, 1],
                                    [-1, 1, -1],
                                    [1, -1, -1]]
                                   ]])
 
feature_map1 = conv1(x)
feature_map2 = conv2(x)
feature_map3 = conv3(x)
 
print(feature_map1 / 9)
print(feature_map2 / 9)
print(feature_map3 / 9)
 
print("--------------- 池化  ---------------")
max_pool = nn.MaxPool2d(2, padding=0, stride=2)  # Pooling
zeroPad = nn.ZeroPad2d(padding=(0, 1, 0, 1))  # pad 0 , Left Right Up Down
 
feature_map_pad_0_1 = zeroPad(feature_map1)
feature_pool_1 = max_pool(feature_map_pad_0_1)
feature_map_pad_0_2 = zeroPad(feature_map2)
feature_pool_2 = max_pool(feature_map_pad_0_2)
feature_map_pad_0_3 = zeroPad(feature_map3)
feature_pool_3 = max_pool(feature_map_pad_0_3)
 
print(feature_pool_1.size())
print(feature_pool_1 / 9)
print(feature_pool_2 / 9)
print(feature_pool_3 / 9)
 
print("--------------- 激活  ---------------")
activation_function = nn.ReLU()
 
feature_relu1 = activation_function(feature_map1)
feature_relu2 = activation_function(feature_map2)
feature_relu3 = activation_function(feature_map3)
print(feature_relu1 / 9)
print(feature_relu2 / 9)
print(feature_relu3 / 9)

C:\Users\74502\ven\Scripts\python.exe C:/Users/74502/PycharmProjects/pythonProject/fdh.py
torch.Size([1, 1, 9, 9])
tensor([[[[-1., -1., -1., -1., -1., -1., -1., -1., -1.],
          [-1.,  1., -1., -1., -1., -1., -1.,  1., -1.],
          [-1., -1.,  1., -1., -1., -1.,  1., -1., -1.],
          [-1., -1., -1.,  1., -1.,  1., -1., -1., -1.],
          [-1., -1., -1., -1.,  1., -1., -1., -1., -1.],
          [-1., -1., -1.,  1., -1.,  1., -1., -1., -1.],
          [-1., -1.,  1., -1., -1., -1.,  1., -1., -1.],
          [-1.,  1., -1., -1., -1., -1., -1.,  1., -1.],
          [-1., -1., -1., -1., -1., -1., -1., -1., -1.]]]])
--------------- 卷积  ---------------
tensor([[[[ 0.7612, -0.1277,  0.0945,  0.3167,  0.5390, -0.1277,  0.3167],
          [-0.1277,  0.9834, -0.1277,  0.3167, -0.1277,  0.0945, -0.1277],
          [ 0.0945, -0.1277,  0.9834, -0.3499,  0.0945, -0.1277,  0.5390],
          [ 0.3167,  0.3167, -0.3499,  0.5390, -0.3499,  0.3167,  0.3167],
          [ 0.5390, -0.1277,  0.0945, -0.3499,  0.9834, -0.1277,  0.0945],
          [-0.1277,  0.0945, -0.1277,  0.3167, -0.1277,  0.9834, -0.1277],
          [ 0.3167, -0.1277,  0.5390,  0.3167,  0.0945, -0.1277,  0.7612]]]],
       grad_fn=<DivBackward0>)
tensor([[[[ 0.3026, -0.5863,  0.0804, -0.1418,  0.0804, -0.5863,  0.3026],
          [-0.5863,  0.5248, -0.5863,  0.3026, -0.5863,  0.5248, -0.5863],
          [ 0.0804, -0.5863,  0.5248, -0.8085,  0.5248, -0.5863,  0.0804],
          [-0.1418,  0.3026, -0.8085,  0.9693, -0.8085,  0.3026, -0.1418],
          [ 0.0804, -0.5863,  0.5248, -0.8085,  0.5248, -0.5863,  0.0804],
          [-0.5863,  0.5248, -0.5863,  0.3026, -0.5863,  0.5248, -0.5863],
          [ 0.3026, -0.5863,  0.0804, -0.1418,  0.0804, -0.5863,  0.3026]]]],
       grad_fn=<DivBackward0>)
tensor([[[[ 0.3514, -0.0931,  0.5736,  0.3514,  0.1292, -0.0931,  0.7958],
          [-0.0931,  0.1292, -0.0931,  0.3514, -0.0931,  1.0180, -0.0931],
          [ 0.5736, -0.0931,  0.1292, -0.3153,  1.0180, -0.0931,  0.1292],
          [ 0.3514,  0.3514, -0.3153,  0.5736, -0.3153,  0.3514,  0.3514],
          [ 0.1292, -0.0931,  1.0180, -0.3153,  0.1292, -0.0931,  0.5736],
          [-0.0931,  1.0180, -0.0931,  0.3514, -0.0931,  0.1292, -0.0931],
          [ 0.7958, -0.0931,  0.1292,  0.3514,  0.5736, -0.0931,  0.3514]]]],
       grad_fn=<DivBackward0>)
--------------- 池化  ---------------
torch.Size([1, 1, 4, 4])
tensor([[[[0.9834, 0.3167, 0.5390, 0.3167],
          [0.3167, 0.9834, 0.3167, 0.5390],
          [0.5390, 0.3167, 0.9834, 0.0945],
          [0.3167, 0.5390, 0.0945, 0.7612]]]], grad_fn=<DivBackward0>)
tensor([[[[0.5248, 0.3026, 0.5248, 0.3026],
          [0.3026, 0.9693, 0.5248, 0.0804],
          [0.5248, 0.5248, 0.5248, 0.0804],
          [0.3026, 0.0804, 0.0804, 0.3026]]]], grad_fn=<DivBackward0>)
tensor([[[[0.3514, 0.5736, 1.0180, 0.7958],
          [0.5736, 0.5736, 1.0180, 0.3514],
          [1.0180, 1.0180, 0.1292, 0.5736],
          [0.7958, 0.3514, 0.5736, 0.3514]]]], grad_fn=<DivBackward0>)
--------------- 激活  ---------------
tensor([[[[0.7612, 0.0000, 0.0945, 0.3167, 0.5390, 0.0000, 0.3167],
          [0.0000, 0.9834, 0.0000, 0.3167, 0.0000, 0.0945, 0.0000],
          [0.0945, 0.0000, 0.9834, 0.0000, 0.0945, 0.0000, 0.5390],
          [0.3167, 0.3167, 0.0000, 0.5390, 0.0000, 0.3167, 0.3167],
          [0.5390, 0.0000, 0.0945, 0.0000, 0.9834, 0.0000, 0.0945],
          [0.0000, 0.0945, 0.0000, 0.3167, 0.0000, 0.9834, 0.0000],
          [0.3167, 0.0000, 0.5390, 0.3167, 0.0945, 0.0000, 0.7612]]]],
       grad_fn=<DivBackward0>)
tensor([[[[0.3026, 0.0000, 0.0804, 0.0000, 0.0804, 0.0000, 0.3026],
          [0.0000, 0.5248, 0.0000, 0.3026, 0.0000, 0.5248, 0.0000],
          [0.0804, 0.0000, 0.5248, 0.0000, 0.5248, 0.0000, 0.0804],
          [0.0000, 0.3026, 0.0000, 0.9693, 0.0000, 0.3026, 0.0000],
          [0.0804, 0.0000, 0.5248, 0.0000, 0.5248, 0.0000, 0.0804],
          [0.0000, 0.5248, 0.0000, 0.3026, 0.0000, 0.5248, 0.0000],
          [0.3026, 0.0000, 0.0804, 0.0000, 0.0804, 0.0000, 0.3026]]]],
       grad_fn=<DivBackward0>)
tensor([[[[0.3514, 0.0000, 0.5736, 0.3514, 0.1292, 0.0000, 0.7958],
          [0.0000, 0.1292, 0.0000, 0.3514, 0.0000, 1.0180, 0.0000],
          [0.5736, 0.0000, 0.1292, 0.0000, 1.0180, 0.0000, 0.1292],
          [0.3514, 0.3514, 0.0000, 0.5736, 0.0000, 0.3514, 0.3514],
          [0.1292, 0.0000, 1.0180, 0.0000, 0.1292, 0.0000, 0.5736],
          [0.0000, 1.0180, 0.0000, 0.3514, 0.0000, 0.1292, 0.0000],
          [0.7958, 0.0000, 0.1292, 0.3514, 0.5736, 0.0000, 0.3514]]]],
       grad_fn=<DivBackward0>)

进程已结束，退出代码为 0

3. 可视化：了解数字与图像之间的关系

可视化卷积核和特征图

import torch
import torch.nn as nn
import matplotlib.pyplot as plt
 
plt.rcParams['font.sans-serif'] = ['SimHei']  # 用来正常显示中文标签
plt.rcParams['axes.unicode_minus'] = False  # 用来正常显示负号 #有中文出现的情况，需要u'内容
x = torch.tensor([[[[-1, -1, -1, -1, -1, -1, -1, -1, -1],
                    [-1, 1, -1, -1, -1, -1, -1, 1, -1],
                    [-1, -1, 1, -1, -1, -1, 1, -1, -1],
                    [-1, -1, -1, 1, -1, 1, -1, -1, -1],
                    [-1, -1, -1, -1, 1, -1, -1, -1, -1],
                    [-1, -1, -1, 1, -1, 1, -1, -1, -1],
                    [-1, -1, 1, -1, -1, -1, 1, -1, -1],
                    [-1, 1, -1, -1, -1, -1, -1, 1, -1],
                    [-1, -1, -1, -1, -1, -1, -1, -1, -1]]]], dtype=torch.float)
print(x.shape)
print(x)
img = x.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.imshow(img, cmap='gray')
plt.title('原图')
plt.show()
 
print("--------------- 卷积  ---------------")
conv1 = nn.Conv2d(1, 1, (3, 3), 1)  # in_channel , out_channel , kennel_size , stride
conv1.weight.data = torch.Tensor([[[[1, -1, -1],
                                    [-1, 1, -1],
                                    [-1, -1, 1]]
                                   ]])
img = conv1.weight.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 1)
plt.imshow(img, cmap='gray')
plt.title('Kernel 1')
conv2 = nn.Conv2d(1, 1, (3, 3), 1)  # in_channel , out_channel , kennel_size , stride
conv2.weight.data = torch.Tensor([[[[1, -1, 1],
                                    [-1, 1, -1],
                                    [1, -1, 1]]
                                   ]])
img = conv2.weight.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 5)
plt.imshow(img, cmap='gray')
plt.title('Kernel 2')
conv3 = nn.Conv2d(1, 1, (3, 3), 1)  # in_channel , out_channel , kennel_size , stride
conv3.weight.data = torch.Tensor([[[[-1, -1, 1],
                                    [-1, 1, -1],
                                    [1, -1, -1]]
                                   ]])
img = conv3.weight.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 9)
plt.imshow(img, cmap='gray')
plt.title('Kernel 3')
 
 
feature_map1 = conv1(x)
feature_map2 = conv2(x)
feature_map3 = conv3(x)
 
print(feature_map1 / 9)
print(feature_map2 / 9)
print(feature_map3 / 9)
 
img = feature_map1.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 2)
plt.imshow(img, cmap='gray')
plt.title('卷积后的特征图1')
img2 = feature_map2.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 6)
plt.imshow(img, cmap='gray')
plt.title('卷积后的特征图2')
img3 = feature_map3.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 10)
plt.imshow(img, cmap='gray')
plt.title('卷积后的特征图3')
 
print("--------------- 池化  ---------------")
max_pool = nn.MaxPool2d(2, padding=0, stride=2)  # Pooling
zeroPad = nn.ZeroPad2d(padding=(0, 1, 0, 1))  # pad 0 , Left Right Up Down
 
feature_map_pad_0_1 = zeroPad(feature_map1)
feature_pool_1 = max_pool(feature_map_pad_0_1)
feature_map_pad_0_2 = zeroPad(feature_map2)
feature_pool_2 = max_pool(feature_map_pad_0_2)
feature_map_pad_0_3 = zeroPad(feature_map3)
feature_pool_3 = max_pool(feature_map_pad_0_3)
 
print(feature_pool_1.size())
print(feature_pool_1 / 9)
print(feature_pool_2 / 9)
print(feature_pool_3 / 9)
img = feature_pool_1.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 3)
plt.imshow(img, cmap='gray')
plt.title('卷积池化后的特征图1')
img2 = feature_pool_2.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 7)
plt.imshow(img, cmap='gray')
plt.title('卷积池化后的特征图2')
img3 = feature_pool_3.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 11)
plt.imshow(img, cmap='gray')
plt.title('卷积池化后的特征图3')
 
 
print("--------------- 激活  ---------------")
activation_function = nn.ReLU()
 
feature_relu1 = activation_function(feature_map1)
feature_relu2 = activation_function(feature_map2)
feature_relu3 = activation_function(feature_map3)
print(feature_relu1 / 9)
print(feature_relu2 / 9)
print(feature_relu3 / 9)
img = feature_relu1.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 4)
plt.imshow(img, cmap='gray')
plt.title('卷积 + relu 后的特征图1')
img2 = feature_relu2.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 8)
plt.imshow(img, cmap='gray')
plt.title('卷积 + relu 后的特征图2')
img3 = feature_relu3.data.squeeze().numpy()  # 将输出转换为图片的格式
plt.subplot(3, 4, 12)
plt.imshow(img, cmap='gray')
plt.title('卷积 + relu 后的特征图3')
plt.show()

在这里插入图片描述

C:\Users\74502\ven\Scripts\python.exe C:/Users/74502/PycharmProjects/pythonProject/fdh.py
torch.Size([1, 1, 9, 9])
tensor([[[[-1., -1., -1., -1., -1., -1., -1., -1., -1.],
          [-1.,  1., -1., -1., -1., -1., -1.,  1., -1.],
          [-1., -1.,  1., -1., -1., -1.,  1., -1., -1.],
          [-1., -1., -1.,  1., -1.,  1., -1., -1., -1.],
          [-1., -1., -1., -1.,  1., -1., -1., -1., -1.],
          [-1., -1., -1.,  1., -1.,  1., -1., -1., -1.],
          [-1., -1.,  1., -1., -1., -1.,  1., -1., -1.],
          [-1.,  1., -1., -1., -1., -1., -1.,  1., -1.],
          [-1., -1., -1., -1., -1., -1., -1., -1., -1.]]]])

二、基于CNN的XO识别

构建模型

class Net(nn.Module):
    def __init__(self):
        super(Net, self).__init__()
        self.conv1 = nn.Conv2d(1, 9, 3)
        self.maxpool = nn.MaxPool2d(2, 2)
        self.conv2 = nn.Conv2d(9, 5, 3)
 
        self.relu = nn.ReLU()
        self.fc1 = nn.Linear(27 * 27 * 5, 1200)
        self.fc2 = nn.Linear(1200, 64)
        self.fc3 = nn.Linear(64, 2)
 
    def forward(self, x):
        x = self.maxpool(self.relu(self.conv1(x)))
        x = self.maxpool(self.relu(self.conv2(x)))
        x = x.view(-1, 27 * 27 * 5)
        x = self.relu(self.fc1(x))
        x = self.relu(self.fc2(x))
        x = self.fc3(x)
        return x

训练模型

model = Net()
 
criterion = torch.nn.CrossEntropyLoss()  # 损失函数 交叉熵损失函数
optimizer = optim.SGD(model.parameters(), lr=0.1)  # 优化函数：随机梯度下降
 
use_gpu = torch.cuda.is_available()
if use_gpu:  # 有cuda
    print("use gpu for training")
    criterion = criterion.cuda()
    model = model.to('cuda')
 
epochs = 10
for epoch in range(epochs):
    running_loss = 0.0
    for i, data in enumerate(data_loader):
        images, label = data
        out = model(images.to('cuda')).to('cuda')
        loss = criterion(out, label.to('cuda'))
 
        optimizer.zero_grad()
        loss.backward()
        optimizer.step()
 
        running_loss += loss.item()
        if (i + 1) % 10 == 0:
            print('[%d  %5d]   loss: %.3f' % (epoch + 1, i + 1, running_loss / 100))
            running_loss = 0.0
 
print('finished train')
# 保存模型
torch.save(model, 'model_name.pth')  # 保存的是模型， 不止是w和b权重值
# torch.save(model.state_dict(), 'model_name1.pth')  # 保存的是w和b权重值

[1     10]   loss: 0.069
[1     20]   loss: 0.069
[2     10]   loss: 0.069
[2     20]   loss: 0.068
[3     10]   loss: 0.066
[3     20]   loss: 0.061
[4     10]   loss: 0.067
[4     20]   loss: 0.062
[5     10]   loss: 0.061
[5     20]   loss: 0.065
[6     10]   loss: 0.069
[6     20]   loss: 0.069
[7     10]   loss: 0.069
[7     20]   loss: 0.069
[8     10]   loss: 0.069
[8     20]   loss: 0.068
[9     10]   loss: 0.061
[9     20]   loss: 0.045
[10     10]   loss: 0.018
[10     20]   loss: 0.077
finished train

进程已结束，退出代码为 0

测试训练好的模型

# 读取模型
model_load = torch.load('model_name.pth')
# 读取一张图片 images[0]，测试
print("labels[0] truth:\t", labels[0])
x = images[0]
x = x.reshape([1, x.shape[0], x.shape[1], x.shape[2]])
predicted = torch.max(model_load(x), 1)
print("labels[0] predict:\t", predicted.indices)
 
img = images[0].data.squeeze().numpy()  # 将输出转换为图片的格式
plt.imshow(img, cmap='gray')
plt.show()

在这里插入图片描述

计算模型的准确率

model = Net()
model.load_state_dict(torch.load('model_name1.pth', map_location='cpu'))  # 导入网络的参数
 
correct = 0
total = 0
with torch.no_grad():  # 进行评测的时候网络不更新梯度
    for data in data_loader_test:  # 读取测试集
        images, labels = data
        outputs = model(images)
        _, predicted = torch.max(outputs.data, 1)  # 取出 最大值的索引 作为 分类结果
        total += labels.size(0)  # labels 的长度
        correct += (predicted == labels).sum().item()  # 预测正确的数目
print('Accuracy of the network on the  test images: %f %%' % (100. * correct / total))

在这里插入图片描述

查看训练好的模型的卷积核

import torch
import matplotlib.pyplot as plt
import numpy as np
from PIL import Image
from torchvision import transforms, datasets
import torch.nn as nn
from torch.utils.data import DataLoader
 
plt.rcParams['font.sans-serif'] = ['SimHei']  # 用来正常显示中文标签
plt.rcParams['axes.unicode_minus'] = False  # 用来正常显示负号 #有中文出现的情况，需要u'内容
#  定义图像预处理过程(要与网络模型训练过程中的预处理过程一致)
transforms = transforms.Compose([
    transforms.ToTensor(),  # 把图片进行归一化，并把数据转换成Tensor类型
    transforms.Grayscale(1)  # 把图片 转为灰度图
])
path =  r'D:\project\DL\training_data_sm'
data_train = datasets.ImageFolder(path, transform=transforms)
data_loader = DataLoader(data_train, batch_size=64, shuffle=True)
for i, data in enumerate(data_loader):
    images, labels = data
    break
 
 
class Net(nn.Module):
    def __init__(self):
        super(Net, self).__init__()
        self.conv1 = nn.Conv2d(1, 9, 3)  # in_channel , out_channel , kennel_size , stride
        self.maxpool = nn.MaxPool2d(2, 2)
        self.conv2 = nn.Conv2d(9, 5, 3)  # in_channel , out_channel , kennel_size , stride
 
        self.relu = nn.ReLU()
        self.fc1 = nn.Linear(27 * 27 * 5, 1200)  # full connect 1
        self.fc2 = nn.Linear(1200, 64)  # full connect 2
        self.fc3 = nn.Linear(64, 2)  # full connect 3
 
    def forward(self, x):
        outputs = []
        x = self.maxpool(self.relu(self.conv1(x)))
        # outputs.append(x)
        x = self.maxpool(self.relu(self.conv2(x)))
        outputs.append(x)
        x = x.view(-1, 27 * 27 * 5)
        x = self.relu(self.fc1(x))
        x = self.relu(self.fc2(x))
        x = self.fc3(x)
        return outputs
 
 
# create model
model1 = Net()
 
# load model weights加载预训练权重
model_weight_path = "model_name1.pth"
model1.load_state_dict(torch.load(model_weight_path))
 
x = images[0]
x = x.reshape([1, x.shape[0], x.shape[1], x.shape[2]])
# forward正向传播过程
out_put = model1(x)
 
weights_keys = model1.state_dict().keys()
for key in weights_keys:
    print("key :", key)
    # 卷积核通道排列顺序 [kernel_number, kernel_channel, kernel_height, kernel_width]
    if key == "conv1.weight":
        weight_t = model1.state_dict()[key].numpy()
        print("weight_t.shape", weight_t.shape)
        k = weight_t[:, 0, :, :]  # 获取第一个卷积核的信息参数
        # show 9 kernel ,1 channel
        plt.figure()
 
        for i in range(9):
            ax = plt.subplot(3, 3, i + 1)  # 参数意义：3：图片绘制行数，5：绘制图片列数，i+1：图的索引
            plt.imshow(k[i, :, :], cmap='gray')
            title_name = 'kernel' + str(i) + ',channel1'
            plt.title(title_name)
        plt.show()
 
    if key == "conv2.weight":
        weight_t = model1.state_dict()[key].numpy()
        print("weight_t.shape", weight_t.shape)
        k = weight_t[:, :, :, :]  # 获取第一个卷积核的信息参数
        print(k.shape)
        print(k)
 
        plt.figure()
        for c in range(9):
            channel = k[:, c, :, :]
            for i in range(5):
                ax = plt.subplot(2, 3, i + 1)  # 参数意义：3：图片绘制行数，5：绘制图片列数，i+1：图的索引
                plt.imshow(channel[i, :, :], cmap='gray')
                title_name = 'kernel' + str(i) + ',channel' + str(c)
                plt.title(title_name)
            plt.show()

在这里插入图片描述

总结

第一部分作业为numpy卷积-池化-激活和使用Pytorch包装好的卷积-池化-激活层，加深了一下这三层的印象第二部分作业主要是基于Pytorch搭建简单的卷积网络来实现XO识别，熟悉了操作的流程。

叶雨柳光

关注

1
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
NNDL 作业6：基于CNN的XO识别

第一部分作业为numpy卷积-池化-激活和使用Pytorch包装好的卷积-池化-激活层，加深了一下这三层的印象第二部分作业主要是基于Pytorch搭建简单的卷积网络来实现XO识别，熟悉了操作的流程。
复制链接

扫一扫