【Python】PIL读取并处理图片（来自于scipy.misc库中代码）

由于scipy在 1.2.0后删除了misc。为了能够使得代码使用类似于misc的读取功能，因此将读取图片的代码从1.2.0库中剥离出来，具体如下所示。

imread

from PIL import Image
from numpy import array

def fromimage(im, flatten=False, mode=None):
    """
    Return a copy of a PIL image as a numpy array.

    This function is only available if Python Imaging Library (PIL) is installed.

    Parameters
    ----------
    im : PIL image
        Input image.
    flatten : bool
        If true, convert the output to grey-scale.
    mode : str, optional
        Mode to convert image to, e.g. ``'RGB'``.  See the Notes of the
        `imread` docstring for more details.

    Returns
    -------
    fromimage : ndarray
        The different colour bands/channels are stored in the
        third dimension, such that a grey-image is MxN, an
        RGB-image MxNx3 and an RGBA-image MxNx4.

    """
    if not Image.isImageType(im):
        raise TypeError("Input is not a PIL image.")

    if mode is not None:
        if mode != im.mode:
            im = im.convert(mode)
    elif im.mode == 'P':
        # Mode 'P' means there is an indexed "palette".  If we leave the mode
        # as 'P', then when we do `a = array(im)` below, `a` will be a 2-D
        # containing the indices into the palette, and not a 3-D array
        # containing the RGB or RGBA values.
        if 'transparency' in im.info:
            im = im.convert('RGBA')
        else:
            im = im.convert('RGB')

    if flatten:
        im = im.convert('F')
    elif im.mode == '1':
        # Workaround for crash in PIL. When im is 1-bit, the call array(im)
        # can cause a seg. fault, or generate garbage. See
        # https://github.com/scipy/scipy/issues/2138 and
        # https://github.com/python-pillow/Pillow/issues/350.
        #
        # This converts im from a 1-bit image to an 8-bit image.
        im = im.convert('L')

    a = array(im)
    return a

def imread(name, flatten=False, mode=None):
    """
    Read an image from a file as an array.

    This function is only available if Python Imaging Library (PIL) is installed.

    Parameters
    ----------
    name : str or file object
        The file name or file object to be read.
    flatten : bool, optional
        If True, flattens the color layers into a single gray-scale layer.
    mode : str, optional
        Mode to convert image to, e.g. ``'RGB'``.  See the Notes for more
        details.

    Returns
    -------
    imread : ndarray
        The array obtained by reading the image.

    Notes
    -----
    `imread` uses the Python Imaging Library (PIL) to read an image.
    The following notes are from the PIL documentation.

    `mode` can be one of the following strings:

    * 'L' (8-bit pixels, black and white)
    * 'P' (8-bit pixels, mapped to any other mode using a color palette)
    * 'RGB' (3x8-bit pixels, true color)
    * 'RGBA' (4x8-bit pixels, true color with transparency mask)
    * 'CMYK' (4x8-bit pixels, color separation)
    * 'YCbCr' (3x8-bit pixels, color video format)
    * 'I' (32-bit signed integer pixels)
    * 'F' (32-bit floating point pixels)

    PIL also provides limited support for a few special modes, including
    'LA' ('L' with alpha), 'RGBX' (true color with padding) and 'RGBa'
    (true color with premultiplied alpha).

    When translating a color image to black and white (mode 'L', 'I' or
    'F'), the library uses the ITU-R 601-2 luma transform::

        L = R * 299/1000 + G * 587/1000 + B * 114/1000

    When `flatten` is True, the image is converted using mode 'F'.
    When `mode` is not None and `flatten` is True, the image is first
    converted according to `mode`, and the result is then flattened using
    mode 'F'.

    """
    im = Image.open(name)
    return fromimage(im, flatten=flatten, mode=mode)

imsave

from __future__ import division, print_function, absolute_import

# Functions which need the PIL

import numpy
import tempfile

from numpy import (amin, amax, ravel, asarray, arange, ones, newaxis,
                   transpose, iscomplexobj, uint8)

try:
    from PIL import Image, ImageFilter
except ImportError:
    import Image
    import ImageFilter

_errstr = "Mode is unknown or incompatible with input array shape."

def bytescale(data, cmin=None, cmax=None, high=255, low=0):
    """
    Byte scales an array (image).

    Byte scaling means converting the input image to uint8 dtype and scaling
    the range to ``(low, high)`` (default 0-255).
    If the input image already has dtype uint8, no scaling is done.

    This function is only available if Python Imaging Library (PIL) is installed.

    Parameters
    ----------
    data : ndarray
        PIL image data array.
    cmin : scalar, optional
        Bias scaling of small values. Default is ``data.min()``.
    cmax : scalar, optional
        Bias scaling of large values. Default is ``data.max()``.
    high : scalar, optional
        Scale max value to `high`.  Default is 255.
    low : scalar, optional
        Scale min value to `low`.  Default is 0.

    Returns
    -------
    img_array : uint8 ndarray
        The byte-scaled array.

    Examples
    --------
    >>> from scipy.misc import bytescale
    >>> img = np.array([[ 91.06794177,   3.39058326,  84.4221549 ],
    ...                 [ 73.88003259,  80.91433048,   4.88878881],
    ...                 [ 51.53875334,  34.45808177,  27.5873488 ]])
    >>> bytescale(img)
    array([[255,   0, 236],
           [205, 225,   4],
           [140,  90,  70]], dtype=uint8)
    >>> bytescale(img, high=200, low=100)
    array([[200, 100, 192],
           [180, 188, 102],
           [155, 135, 128]], dtype=uint8)
    >>> bytescale(img, cmin=0, cmax=255)
    array([[91,  3, 84],
           [74, 81,  5],
           [52, 34, 28]], dtype=uint8)

    """
    if data.dtype == uint8:
        return data

    if high > 255:
        raise ValueError("`high` should be less than or equal to 255.")
    if low < 0:
        raise ValueError("`low` should be greater than or equal to 0.")
    if high < low:
        raise ValueError("`high` should be greater than or equal to `low`.")

    if cmin is None:
        cmin = data.min()
    if cmax is None:
        cmax = data.max()

    cscale = cmax - cmin
    if cscale < 0:
        raise ValueError("`cmax` should be larger than `cmin`.")
    elif cscale == 0:
        cscale = 1

    scale = float(high - low) / cscale
    bytedata = (data - cmin) * scale + low
    return (bytedata.clip(low, high) + 0.5).astype(uint8)

def toimage(arr, high=255, low=0, cmin=None, cmax=None, pal=None,
            mode=None, channel_axis=None):
    """Takes a numpy array and returns a PIL image.

    This function is only available if Python Imaging Library (PIL) is installed.

    The mode of the PIL image depends on the array shape and the `pal` and
    `mode` keywords.

    For 2-D arrays, if `pal` is a valid (N,3) byte-array giving the RGB values
    (from 0 to 255) then ``mode='P'``, otherwise ``mode='L'``, unless mode
    is given as 'F' or 'I' in which case a float and/or integer array is made.

    .. warning::

        This function uses `bytescale` under the hood to rescale images to use
        the full (0, 255) range if ``mode`` is one of ``None, 'L', 'P', 'l'``.
        It will also cast data for 2-D images to ``uint32`` for ``mode=None``
        (which is the default).

    Notes
    -----
    For 3-D arrays, the `channel_axis` argument tells which dimension of the
    array holds the channel data.

    For 3-D arrays if one of the dimensions is 3, the mode is 'RGB'
    by default or 'YCbCr' if selected.

    The numpy array must be either 2 dimensional or 3 dimensional.

    """
    data = asarray(arr)
    if iscomplexobj(data):
        raise ValueError("Cannot convert a complex-valued array.")
    shape = list(data.shape)
    valid = len(shape) == 2 or ((len(shape) == 3) and
                                ((3 in shape) or (4 in shape)))
    if not valid:
        raise ValueError("'arr' does not have a suitable array shape for "
                         "any mode.")
    if len(shape) == 2:
        shape = (shape[1], shape[0])  # columns show up first
        if mode == 'F':
            data32 = data.astype(numpy.float32)
            image = Image.frombytes(mode, shape, data32.tostring())
            return image
        if mode in [None, 'L', 'P']:
            bytedata = bytescale(data, high=high, low=low,
                                 cmin=cmin, cmax=cmax)
            image = Image.frombytes('L', shape, bytedata.tostring())
            if pal is not None:
                image.putpalette(asarray(pal, dtype=uint8).tostring())
                # Becomes a mode='P' automagically.
            elif mode == 'P':  # default gray-scale
                pal = (arange(0, 256, 1, dtype=uint8)[:, newaxis] *
                       ones((3,), dtype=uint8)[newaxis, :])
                image.putpalette(asarray(pal, dtype=uint8).tostring())
            return image
        if mode == '1':  # high input gives threshold for 1
            bytedata = (data > high)
            image = Image.frombytes('1', shape, bytedata.tostring())
            return image
        if cmin is None:
            cmin = amin(ravel(data))
        if cmax is None:
            cmax = amax(ravel(data))
        data = (data*1.0 - cmin)*(high - low)/(cmax - cmin) + low
        if mode == 'I':
            data32 = data.astype(numpy.uint32)
            image = Image.frombytes(mode, shape, data32.tostring())
        else:
            raise ValueError(_errstr)
        return image

    # if here then 3-d array with a 3 or a 4 in the shape length.
    # Check for 3 in datacube shape --- 'RGB' or 'YCbCr'
    if channel_axis is None:
        if (3 in shape):
            ca = numpy.flatnonzero(asarray(shape) == 3)[0]
        else:
            ca = numpy.flatnonzero(asarray(shape) == 4)
            if len(ca):
                ca = ca[0]
            else:
                raise ValueError("Could not find channel dimension.")
    else:
        ca = channel_axis

    numch = shape[ca]
    if numch not in [3, 4]:
        raise ValueError("Channel axis dimension is not valid.")

    bytedata = bytescale(data, high=high, low=low, cmin=cmin, cmax=cmax)
    if ca == 2:
        strdata = bytedata.tostring()
        shape = (shape[1], shape[0])
    elif ca == 1:
        strdata = transpose(bytedata, (0, 2, 1)).tostring()
        shape = (shape[2], shape[0])
    elif ca == 0:
        strdata = transpose(bytedata, (1, 2, 0)).tostring()
        shape = (shape[2], shape[1])
    if mode is None:
        if numch == 3:
            mode = 'RGB'
        else:
            mode = 'RGBA'

    if mode not in ['RGB', 'RGBA', 'YCbCr', 'CMYK']:
        raise ValueError(_errstr)

    if mode in ['RGB', 'YCbCr']:
        if numch != 3:
            raise ValueError("Invalid array shape for mode.")
    if mode in ['RGBA', 'CMYK']:
        if numch != 4:
            raise ValueError("Invalid array shape for mode.")

    # Here we know data and mode is correct
    image = Image.frombytes(mode, shape, strdata)
    return image

def imsave(name, arr, format=None):
    """
    Save an array as an image.

    This function is only available if Python Imaging Library (PIL) is installed.

    .. warning::

        This function uses `bytescale` under the hood to rescale images to use
        the full (0, 255) range if ``mode`` is one of ``None, 'L', 'P', 'l'``.
        It will also cast data for 2-D images to ``uint32`` for ``mode=None``
        (which is the default).

    Parameters
    ----------
    name : str or file object
        Output file name or file object.
    arr : ndarray, MxN or MxNx3 or MxNx4
        Array containing image values.  If the shape is ``MxN``, the array
        represents a grey-level image.  Shape ``MxNx3`` stores the red, green
        and blue bands along the last dimension.  An alpha layer may be
        included, specified as the last colour band of an ``MxNx4`` array.
    format : str
        Image format. If omitted, the format to use is determined from the
        file name extension. If a file object was used instead of a file name,
        this parameter should always be used.

    Examples
    --------
    Construct an array of gradient intensity values and save to file:

    >>> from scipy.misc import imsave
    >>> x = np.zeros((255, 255))
    >>> x = np.zeros((255, 255), dtype=np.uint8)
    >>> x[:] = np.arange(255)
    >>> imsave('gradient.png', x)

    Construct an array with three colour bands (R, G, B) and store to file:

    >>> rgb = np.zeros((255, 255, 3), dtype=np.uint8)
    >>> rgb[..., 0] = np.arange(255)
    >>> rgb[..., 1] = 55
    >>> rgb[..., 2] = 1 - np.arange(255)
    >>> imsave('rgb_gradient.png', rgb)

    """
    im = toimage(arr, channel_axis=2)
    if format is None:
        im.save(name)
    else:
        im.save(name, format)
    return