飞行控制计算机英语,飞行控制与管理,flight control and managing,音标,读音,翻译,英文例句,英语词典...

补充资料:导弹飞行试验安全控制

导弹飞行试验安全控制

safety control in missile flight test

daodan feixing shiyan anquan kongzhi导弹飞行试验安全控制(s afety controlin missile且ight test)导弹在飞行试验中一旦发生故障,飞行弹道偏离预定弹道,偏差值达到必炸线或极限值时,适时将导弹炸毁所采取的安全措施。安全控制分为地面安全控制和弹上安全自毁两种方式。 导弹飞行试验地面安全控制安全控制指挥员借助计算机提供的信息,监视、判断导弹的瞬时飞行情况是否正常,当危及地面安全时,利用无线电遥控设备实施安全控制。地面安全控制系统由地面设备和弹上设备组成。地面设备有:各种测量设备(光学、雷达、遥测)和通信时统设备。弹上设备有:安全指令接收机、安全控制组合和爆炸器。安全控制方式有3种:①人工方式。由安全控制指挥员判决并下达指令。②人与计算机相结合的方式。经计算机自动判决、提示,并由安全控制指挥员判断、决策下达指令。③计算机方式。由计算机自动判决和发出指令。第二种方式采用较多。地面安全控制系统的工作过程一般是由各种测量设备向中心计算机提供测量信息,经实时处理解算出的外弹道参数(位置、速度、预示落点等)和有关遥侧参数送至显示设备(微机工作站、显示板、大屏幕)显示图形、数字、文字、曲线等。显示内容有:导弹飞行瞬时的位置、速度和预示落点(假定推力终止时的预报落点)等外弹道参数。通常以外弹道参数作为飞行安全判断的主要依据,遥测参数为辅,其中最重要的是预示落点和速度参数。安全控制指挥员综合利用实时显示的信息来判断导弹是否有故障,是否危及安全和决定导弹是否继续飞行,或终止动力飞行。当显示的预示落点或参数达到必炸线时,安全控制指挥员即发出炸毁指令,由无线电遥控设备发送编码炸毁指令,弹上安全指令接收机接收并解码后,接通爆炸装置将导弹炸毁。 导弹飞行试验弹上安全自毁导弹在飞行试验中若飞行参数偏离预先装定的极限值时,弹上安全自毁装置自动实施安全自毁。安全自毁有姿态失稳、射程超程和定时自毁等。弹上安全自毁装置通常由安全控制组合和爆炸器组成。其工作过程是将导弹每一瞬时的实际参数值与预先装定值进行比较,当超出允许值时,安全自毁装置立即发出自毁指令,自动解除保险,实施自毁。例如远射程战略导弹的姿态自毁,在惯性平台的外框架设有大姿态自毁的触点,导弹飞行中若俯仰、偏航、滚动角的偏差超出预定值时,发出自毁指令,接通爆炸器将其炸毁。战术导弹一般采用引爆战斗部实施自毁。(潘培泰)

说明:补充资料仅用于学习参考,请勿用于其它任何用途。

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
A typical project life cycle consists of five main phases: 1. Initiation: In this phase, the project is identified, defined, and approved. The project team is assembled, and the project charter is created. The outcome of this phase is the project charter, which outlines the project purpose, goals, objectives, deliverables, stakeholders, and resources required. 2. Planning: In this phase, the project plan is developed, and the project scope, schedule, budget, and resources are defined. The project team identifies potential risks and develops risk management strategies. The outcome of this phase is the project plan, which outlines the detailed project scope, schedule, budget, and resource requirements. 3. Execution: In this phase, the project plan is put into action, and the project deliverables are produced. The project team implements the project management and quality assurance processes. The outcome of this phase is the completed deliverables. 4. Monitoring and Control: In this phase, the project progress is monitored, and the project performance is measured against the project plan. Any issues or deviations from the plan are identified, and corrective actions are taken. The outcome of this phase is the updated project plan, which reflects any changes made during the monitoring and control phase. 5. Closure: In this phase, the project is completed, and the project deliverables are accepted by the stakeholders. The project team conducts a project review and documents the lessons learned. The outcome of this phase is the project closure report, which outlines the project success, challenges, and recommendations for future projects. Overall, the project life cycle is a systematic approach to managing projects from initiation to closure, ensuring that projects are completed on time, within budget, and to the satisfaction of stakeholders.

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值