esp8266舵机驱动_arduino开发ESP8266学习笔记四—–舵机

arduino开发ESP8266学习笔记四—–舵机

使用时发现会有ESP8266掉电的情况，应该是板上的稳压芯片的限流导致的，观测波形，发现当舵机运转时，电源线3.3V不再是稳定的3.3V，大概是在3.0V到3.3V范围内高频振动，这应该是ESP8266掉电的原因，可以将舵机电源连接到另一个电源上。当舵机使用外部电源的时候，一定要将舵机的电源地和ESP8266的地要连接在一起，这样，才可以正常工作。

这次使用了Servo.h的头文件，头文件内容如下：

/*

Servo.h – Interrupt driven Servo library for Esp8266 using timers

Original Copyright (c) 2015 Michael C. Miller. All right reserved.

This library is free software; you can redistribute it and/or

modify it under the terms of the GNU Lesser General Public

License as published by the Free Software Foundation; either

version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty