本文介绍了如何使用IxEplorer设置自定义流和导入enc文件作为流来发送网络数据包。详细步骤包括配置设备、创建新流、设定帧数据和协议，以及控制流的发送方式。此外，还讲解了如何导入enc文件并将其转换为可发送的流。
IxEplorer can be used to send and recieve customized data or send imported ".enc" data as stream.
IxEplorer 这个软件可以用来发送和接收自定义数据包或者导入“enc”文件发送。
Part 1: Setting your own stream
Step 1.
The device I use called "IXIA", connected to its IP address and select the port you want to use as TX. Here I use port 4 as input, double click it to set the packet stream.
Step 2.
Right click and create a new stream, name it and bouble click to set the contnent of your stream
Frame data
Preamble: 8Byte. Normally a standard packet start with preamble and ends with CRC: preamble+payload(data pattern)+CRC. For here I go with default.
Data pattern: data pattern is the data you want to deal with. For here I want to set the pattern to my lastname(WEIXU)
最低0.47元/天 解锁文章
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
