ADC测试matlab代码

前面有做过ADC性能测试，测试方式是先使用ADC采集一个单频信号，然后利用matlab进行性能分析。

下面把matlab分析的代码记录下来：

复制代码
1 %The following program code plots the FFT spectrum of a desired test tone. Test tone based on coherent sampling criteria, and
2 %computes SNR, SINAD, THD and SFDR.
3 %This program is believed to be accurate and reliable. This program may get altered without prior notification.;
4
5 %fid=fopen(‘F:\pelican_ADC_test\vjtag_prj\data_analysis\single_tone.txt’,‘r’);
6 %numpt=input(‘Number of Points in FFT? ‘);
7 %fclk=input(‘Sampling Frequency (MHz)? ‘);
8 %numbit=input(‘ADC Resolution (bits)? ‘);
9 close all;
10 clear all;
11
12 numpt=4096;
13 fclk=455/16;
14 % fclk=455/16/14;
15 numbit=12;
16
17 % a=textread(‘dds_data_out.txt’,’%s’)’;%以字符形式打开文件
18 % a=dlmread(‘sample_data.txt’,’%s’)’;%以字符形式打开文件
19 a=dlmread(‘sample_data