华为atlas500小站开机学习

最新推荐文章于 2024-06-12 18:46:36 发布

无证驾驶梁嗖嗖

最新推荐文章于 2024-06-12 18:46:36 发布

阅读量1.3k

点赞数

文章标签：学习华为

本文链接：https://blog.csdn.net/weixin_46151178/article/details/124834272

版权

Euler:~ # cd /tmp/
Euler:/tmp # fw_printenv
arch=arm
baudrate=115200
board=hi3559av100
board_name=hi3559av100
bootargs=cma=90M mem=4032M console=ttyAMA2,115200 initcall_debug ramdisk_size=524288 root=/dev/mmcblk0p3 rw rdinit=/sbin/init initrd=0x4a000000,256M cmdlinepart.mtdparts=hi_sfc:512K(boot),15878K(env) selinux=0 minid_3559=1 memmap=16M$0xC3000000 brd_t=sei audit=1
bootargs_a=cma=90M mem=4032M console=ttyAMA2,115200 initcall_debug ramdisk_size=524288 root=/dev/mmcblk0p2 rw rdinit=/sbin/init initrd=0x4a000000,256M cmdlinepart.mtdparts=hi_sfc:512K(boot),15878K(env) selinux=0 minid_3559=1 memmap=16M$0xC3000000 brd_t=sei audit=1
bootargs_b=cma=90M mem=4032M console=ttyAMA2,115200 initcall_debug ramdisk_size=524288 root=/dev/mmcblk0p3 rw rdinit=/sbin/init initrd=0x4a000000,256M cmdlinepart.mtdparts=hi_sfc:512K(boot),15878K(env) selinux=0 minid_3559=1 memmap=16M$0xC3000000 brd_t=sei audit=1
bootargs_g=cma=90M mem=4032M console=ttyAMA2,115200 initcall_debug ramdisk_size=524288 root=/dev/ram0 rw rdinit=/sc_init initrd=0x4a000000,256M cmdlinepart.mtdparts=hi_sfc:512K(boot),15878K(env) selinux=0 minid_3559=1 memmap=16M$0xC3000000 brd_t=sei
bootcmd=ext4load mmc 0:3 0x44000000 uImage_hi3559av100_multi-core;cmscheck 0x44000000;ext4load mmc 0:3 0x49ffffc0 SEI_FS.img;cmscheck 0x49ffffc0;bootm 0x44000040
bootdelay=2
cpu=armv8
env_ver=1.08
ethact=gmac0
soc=hi3559av100
stderr=serial
stdin=serial
stdout=serial
uboot_ver=21.0.2.9
vendor=hisilicon
verify=n
Euler:/tmp #

卸载和重新安装AtlasEdge软件

卸载操作不会保留数据。

应用场景

放弃使用当前版本，打算使用较当前版本更早的版本。且不符合版本回退的情况。

卸载和重新安装约束

由于只卸载AtlasEdge软件，并没有卸载对应的设备OM和固件，所以在重新安装时存在以下约束。

21.0.3版本卸载后，只支持重新安装20.3.0版本。
21.0.4版本卸载后，只支持重新安装20.3.0版本或21.0.2.9版本。
22.0.0版本卸载后，只支持重新安装21.0.4版本。
如果想安装其他版本，建议通过20.3.0版本过渡。

卸载和重新安装操作

通过命令行卸载当前版本软件。如：卸载MindX Edge2.0.3版本可以在安装目录“/opt/middleware/AtlasEdge/”执行./run.sh uninstall。
通过SmartKit进行批量卸载，请参见《MindX Edge 应用部署与模型更新指南》中的“升级AtlasEdge软件 > FAQ >如何批量卸载预置的软件版本，重新安装新版本”章节。
恢复出厂设置 - Atlas 500 智能小站用户指南 (型号 3000, 3010) 14 - 华为 (huawei.com)
切记恢复出厂设置以后develop模式的密码也是默认密码
Atlas 500 智能小站 - Atlas硬件产品用户清单 02 - 华为 (huawei.com)

Euler:~ # ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
        ether 02:42:98:4f:3a:ef  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.2.111  netmask 255.255.255.0  broadcast 192.168.2.255
        inet6 fe80::ce05:77ff:fefc:f6a7  prefixlen 64  scopeid 0x20<link>
        ether cc:05:77:fc:f6:a7  txqueuelen 1000  (Ethernet)
        RX packets 894  bytes 205931 (201.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 473  bytes 49878 (48.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 40

eth1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.3.111  netmask 255.255.255.0  broadcast 192.168.3.255
        ether cc:05:77:fc:f6:a8  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 41

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 167  bytes 13568 (13.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 167  bytes 13568 (13.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Euler:~ # timed out waiting for input: auto-logout
IES:/->develop
input root passwd
Password:
Last login: Wed May 18 16:44:06 CST 2022 on pts/0
Euler:~ # ies_tool restore_factory -e eth0
The system will be restored to factory settings, including the user name, password and so on.
Are you sure want to continue? Y/N
y
Starting restore factory settings...
The system will be automatically reset. Please wait about 10 minutes
Euler:~ #
──────────────────────────────────────────────────────────

admin

Huawei12#$

登录Atlas IES Web界面或命令行

-

root

Huawei@SYS3

进入develop模式

Linux系统管理员用户，不可直接使用root用户登录开发者命令行界面。

在命令行界面可通过执行develop命令登录开发者命令行界面。

Euler:/var/lib/docker # ./Ascend-cann-nnrt_5.1.RC2.alpha002_linux-aarch64.run --install
Verifying archive integrity...  100%   SHA256 checksums are OK. All good.
Uncompressing ASCEND_RUN_PACKAGE  100%
[NNRT] [20220518-10:47:40] [INFO] The path /opt/ascend is correct.
[NNRT] [20220518-10:47:40] [INFO] change umask 0022
[NNRT] [20220518-10:47:40] [INFO] touch /var/log/ascend_seclog/ascend_nnrt_install.log
[NNRT] [20220518-10:47:40] [INFO] LogFile:/var/log/ascend_seclog/ascend_nnrt_install.log
[NNRT] [20220518-10:47:40] [INFO] install start
[NNRT] [20220518-10:47:40] [INFO] The install path is /opt/ascend .
[NNRT] [20220518-10:47:40] [INFO] install package CANN-runtime-5.1.RC2.alpha002-linux_aarch64.run start
[NNRT] [20220518-10:47:55] [INFO] CANN-runtime-5.1.RC2.alpha002-linux_aarch64.run --full --quiet --nox11 install success
[NNRT] [20220518-10:47:55] [INFO] install package Ascend310-aicpu_kernels-1.82.t3.0.b100.run start
[NNRT] [20220518-10:48:00] [INFO] Ascend310-aicpu_kernels-1.82.t3.0.b100.run --full --quiet --nox11 install success
[NNRT] [20220518-10:48:00] [INFO] install package Ascend710-aicpu_kernels-1.82.t3.0.b100.run start
[NNRT] [20220518-10:48:06] [INFO] Ascend710-aicpu_kernels-1.82.t3.0.b100.run --full --quiet --nox11 install success
[NNRT] [20220518-10:48:06] [INFO] install package Ascend310-aicpu_kernels_minirc-1.82.t3.0.b100.run start
[NNRT] [20220518-10:48:11] [INFO] Ascend310-aicpu_kernels_minirc-1.82.t3.0.b100.run --full --quiet --nox11 install success
[NNRT] [20220518-10:48:11] [INFO] install package Ascend-pyACL_5.1.RC2.alpha002_linux-aarch64.run start
[NNRT] [20220518-10:48:12] [INFO] Ascend-pyACL_5.1.RC2.alpha002_linux-aarch64.run --full --quiet --nox11 install success
[NNRT] [20220518-10:48:12] [INFO] install package Ascend-test-ops_5.1.RC2.alpha002_linux.run start
[NNRT] [20220518-10:48:13] [INFO] Ascend-test-ops_5.1.RC2.alpha002_linux.run --full --quiet --nox11 install success
[NNRT] [20220518-10:48:13] [INFO] Please make sure that:
LD_LIBRARY_PATH includes :
        /opt/ascend/nnrt/latest/lib64:
PYTHONPATH includes :
        /opt/ascend/nnrt/latest/python/site-packages:
ASCEND_AICPU_PATH includes :
        /opt/ascend/nnrt/latest:
ASCEND_OPP_PATH includes :
        /opt/ascend/nnrt/latest/opp:
[NNRT] [20220518-10:48:13] [INFO] If your service is started using the shell script, you can call the /opt/ascend/nnrt/set_env.sh script to configure environment variables. Note that this script can not be executed mannually.
[NNRT] [20220518-10:48:14] [INFO] Ascend-cann-nnrt_5.1.RC2.alpha002_linux-aarch64 install success,The install path is /opt/ascend

昇腾人工智能MindX SDK-昇腾社区 (hiascend.com)

无证驾驶梁嗖嗖

关注

0
点赞
踩
1

收藏

觉得还不错? 一键收藏
打赏
0
评论
华为atlas500小站开机学习

Euler:~ # cd /tmp/Euler:/tmp # fw_printenvarch=armbaudrate=115200board=hi3559av100board_name=hi3559av100bootargs=cma=90M mem=4032M console=ttyAMA2,115200 initcall_debug ramdisk_size=524288 root=/dev/mmcblk0p3 rw rdinit=/sbin/init initrd=0x4a000000,2.
复制链接

扫一扫