oled雅特力单片机程序

keep -move

已于 2024-02-27 20:54:36 修改

阅读量1.3k

点赞数 28

文章标签：单片机嵌入式硬件

于 2024-02-27 20:51:39 首次发布

本文链接：https://blog.csdn.net/weixin_47848749/article/details/136331621

版权

以下时at32f413系列单片机oled程序

oled.c

#include "at32f413_clock.h"
#include "OLED_Font.h"
#include "Delay.h"
/*引脚配置*/
#define OLED_W_SCL(x)       gpio_bits_write(GPIOA, OLED_SCL, (confirm_state)(x))
#define OLED_W_SDA(x)       gpio_bits_write(GPIOA, OLED_SDA, (confirm_state)(x))
#define OLED_SCL GPIO_PINS_1
#define OLED_SDA GPIO_PINS_0
/*引脚初始化*/
void OLED_I2C_Init(void)
{
gpio_init_type gpio_init_struct;
crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE);
gpio_default_para_init(&gpio_init_struct);

gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
gpio_init_struct.gpio_out_type = GPIO_OUTPUT_OPEN_DRAIN;
gpio_init_struct.gpio_mode = GPIO_MODE_OUTPUT;
gpio_init_struct.gpio_pins = OLED_SDA|OLED_SCL;
gpio_init_struct.gpio_pull = GPIO_PULL_NONE;
gpio_init(GPIOA, &gpio_init_struct);

   OLED_W_SCL(1);
   OLED_W_SDA(1);
   delay_us(5);
}

/**
* @brief I2C开始
* @param 无
* @retval 无
*/
void OLED_I2C_Start(void)
{
   OLED_W_SDA(1);
   delay_us(5);
   OLED_W_SCL(1);
   delay_us(5);
   OLED_W_SDA(0);
   OLED_W_SCL(0);
   delay_us(5);
}

/**
* @brief I2C停止
* @param 无
* @retval 无
*/
void OLED_I2C_Stop(void)
{
   OLED_W_SDA(0);
   delay_us(5);
   OLED_W_SCL(1);
   OLED_W_SDA(1);
   delay_us(5);
}

/**
* @brief I2C发送一个字节
* @param Byte 要发送的一个字节
* @retval 无
*/
void OLED_I2C_SendByte(uint8_t Byte)
{
   uint8_t i;
   for (i = 0; i < 8; i++)
   {
       OLED_W_SDA(Byte & (0x80 >> i));
       delay_us(5);
       OLED_W_SCL(1);
       delay_us(5);
       OLED_W_SCL(0);
   }
   OLED_W_SCL(1);   //额外的一个时钟，不处理应答信号
   delay_us(5);
   OLED_W_SCL(0);
}

/**
* @brief OLED写命令
* @param Command 要写入的命令
* @retval 无
*/
void OLED_WriteCommand(uint8_t Command)
{
   OLED_I2C_Start();
   OLED_I2C_SendByte(0x78);       //从机地址
   OLED_I2C_SendByte(0x00);       //写命令
   OLED_I2C_SendByte(Command);
   OLED_I2C_Stop();
}

/**
* @brief OLED写数据
* @param Data 要写入的数据
* @retval 无
*/
void OLED_WriteData(uint8_t Data)
{
   OLED_I2C_Start();
   OLED_I2C_SendByte(0x78);       //从机地址
   OLED_I2C_SendByte(0x40);       //写数据
   OLED_I2C_SendByte(Data);
   OLED_I2C_Stop();
}

/**
* @brief OLED设置光标位置
* @param Y 以左上角为原点，向下方向的坐标，范围：0~7
* @param X 以左上角为原点，向右方向的坐标，范围：0~127
* @retval 无
*/
void OLED_SetCursor(uint8_t Y, uint8_t X)
{
   OLED_WriteCommand(0xB0 | Y);                   //设置Y位置
   OLED_WriteCommand(0x10 | ((X & 0xF0) >> 4));   //设置X位置高4位
   OLED_WriteCommand(0x00 | (X & 0x0F));           //设置X位置低4位
}

/**
* @brief OLED清屏
* @param 无
* @retval 无
*/
void OLED_Clear(void)
{
   uint8_t i, j;
   for (j = 0; j < 8; j++)
   {
       OLED_SetCursor(j, 0);
       for(i = 0; i < 128; i++)
       {
           OLED_WriteData(0x00);
       }
   }
}

/**
* @brief OLED显示一个字符
* @param Line 行位置，范围：1~4
* @param Column 列位置，范围：1~16
* @param Char 要显示的一个字符，范围：ASCII可见字符
* @retval 无
*/
void OLED_ShowChar(uint8_t Line, uint8_t Column, char Char)
{
   uint8_t i;
   OLED_SetCursor((Line - 1) * 2, (Column - 1) * 8);       //设置光标位置在上半部分
   for (i = 0; i < 8; i++)
   {
       OLED_WriteData(OLED_F8x16[Char - ' '][i]);           //显示上半部分内容
   }
   OLED_SetCursor((Line - 1) * 2 + 1, (Column - 1) * 8);   //设置光标位置在下半部分
   for (i = 0; i < 8; i++)
   {
       OLED_WriteData(OLED_F8x16[Char - ' '][i + 8]);       //显示下半部分内容
   }
}

/**
* @brief OLED显示字符串
* @param Line 起始行位置，范围：1~4
* @param Column 起始列位置，范围：1~16
* @param String 要显示的字符串，范围：ASCII可见字符
* @retval 无
*/
void OLED_ShowString(uint8_t Line, uint8_t Column, char *String)
{
   uint8_t i;
   for (i = 0; String[i] != '\0'; i++)
   {
       OLED_ShowChar(Line, Column + i, String[i]);
   }
}

/**
* @brief OLED次方函数
* @retval 返回值等于X的Y次方
*/
uint32_t OLED_Pow(uint32_t X, uint32_t Y)
{
   uint32_t Result = 1;
   while (Y--)
   {
       Result *= X;
   }
   return Result;
}

/**
* @brief OLED显示数字（十进制，正数）
* @param Line 起始行位置，范围：1~4
* @param Column 起始列位置，范围：1~16
* @param Number 要显示的数字，范围：0~4294967295
* @param Length 要显示数字的长度，范围：1~10
* @retval 无
*/
void OLED_ShowNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
{
   uint8_t i;
   for (i = 0; i < Length; i++)
   {
       OLED_ShowChar(Line, Column + i, Number / OLED_Pow(10, Length - i - 1) % 10 + '0');
   }
}

/**
* @brief OLED显示数字（十进制，带符号数）
* @param Line 起始行位置，范围：1~4
* @param Column 起始列位置，范围：1~16
* @param Number 要显示的数字，范围：-2147483648~2147483647
* @param Length 要显示数字的长度，范围：1~10
* @retval 无
*/
void OLED_ShowSignedNum(uint8_t Line, uint8_t Column, int32_t Number, uint8_t Length)
{
   uint8_t i;
   uint32_t Number1;
   if (Number >= 0)
   {
       OLED_ShowChar(Line, Column, '+');
       Number1 = Number;
   }
   else
   {
       OLED_ShowChar(Line, Column, '-');
       Number1 = -Number;
   }
   for (i = 0; i < Length; i++)
   {
       OLED_ShowChar(Line, Column + i + 1, Number1 / OLED_Pow(10, Length - i - 1) % 10 + '0');
   }
}

/**
* @brief OLED显示数字（十六进制，正数）
* @param Line 起始行位置，范围：1~4
* @param Column 起始列位置，范围：1~16
* @param Number 要显示的数字，范围：0~0xFFFFFFFF
* @param Length 要显示数字的长度，范围：1~8
* @retval 无
*/
void OLED_ShowHexNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
{
   uint8_t i, SingleNumber;
   for (i = 0; i < Length; i++)
   {
       SingleNumber = Number / OLED_Pow(16, Length - i - 1) % 16;
       if (SingleNumber < 10)
       {
           OLED_ShowChar(Line, Column + i, SingleNumber + '0');
       }
       else
       {
           OLED_ShowChar(Line, Column + i, SingleNumber - 10 + 'A');
       }
   }
}

/**
* @brief OLED显示数字（二进制，正数）
* @param Line 起始行位置，范围：1~4
* @param Column 起始列位置，范围：1~16
* @param Number 要显示的数字，范围：0~1111 1111 1111 1111
* @param Length 要显示数字的长度，范围：1~16
* @retval 无
*/
void OLED_ShowBinNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
{
   uint8_t i;
   for (i = 0; i < Length; i++)
   {
       OLED_ShowChar(Line, Column + i, Number / OLED_Pow(2, Length - i - 1) % 2 + '0');
   }
}

/**
* @brief OLED初始化
* @param 无
* @retval 无
*/
void OLED_Init(void)
{
   uint32_t i, j;

   for (i = 0; i < 1000; i++)           //上电延时
   {
       for (j = 0; j < 1000; j++);
   }

   OLED_I2C_Init();           //端口初始化

   OLED_WriteCommand(0xAE);   //关闭显示

   OLED_WriteCommand(0xD5);   //设置显示时钟分频比/振荡器频率
   OLED_WriteCommand(0x80);

   OLED_WriteCommand(0xA8);   //设置多路复用率
   OLED_WriteCommand(0x3F);

   OLED_WriteCommand(0xD3);   //设置显示偏移
   OLED_WriteCommand(0x00);

   OLED_WriteCommand(0x40);   //设置显示开始行

   OLED_WriteCommand(0xA1);   //设置左右方向，0xA1正常 0xA0左右反置

   OLED_WriteCommand(0xC8);   //设置上下方向，0xC8正常 0xC0上下反置

   OLED_WriteCommand(0xDA);   //设置COM引脚硬件配置
   OLED_WriteCommand(0x12);

   OLED_WriteCommand(0x81);   //设置对比度控制
   OLED_WriteCommand(0xCF);

OLED_WriteCommand(0xD9); //设置预充电周期
OLED_WriteCommand(0xF1);

OLED_WriteCommand(0xDB); //设置VCOMH取消选择级别
OLED_WriteCommand(0x30);

OLED_WriteCommand(0xA4); //设置整个显示打开/关闭

OLED_WriteCommand(0xA6); //设置正常/倒转显示

OLED_WriteCommand(0x8D); //设置充电泵
OLED_WriteCommand(0x14);

   OLED_WriteCommand(0xAF);   //开启显示

   OLED_Clear();               //OLED清屏
}
olde.h

#ifndef __OLED_H
#define __OLED_H

void OLED_Init(void);
void OLED_Clear(void);
void OLED_ShowChar(uint8_t Line, uint8_t Column, char Char);
void OLED_ShowString(uint8_t Line, uint8_t Column, char *String);
void OLED_ShowNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length);
void OLED_ShowSignedNum(uint8_t Line, uint8_t Column, int32_t Number, uint8_t Length);
void OLED_ShowHexNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length);
void OLED_ShowBinNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length);

#endif

olde_font.h

#ifndef __OLED_FONT_H
#define __OLED_FONT_H

/*OLED字模库，宽8像素，高16像素*/
const uint8_t OLED_F8x16[][16]=
{
   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0

   0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
   0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1

   0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,
   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2

   0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,
   0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3

   0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,
   0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4

   0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,
   0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5

   0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,
   0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6

   0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,
   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7

   0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,
   0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8

   0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,
   0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9

   0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,
   0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10

   0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,
   0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11

   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
   0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12

   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
   0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13

   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
   0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14

   0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,
   0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15

   0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
   0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16

   0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,
   0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17

   0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,
   0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18

   0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,
   0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19

   0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,
   0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20

   0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,
   0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21

   0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,
   0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22

   0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,
   0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23

   0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,
   0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24

   0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
   0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25

   0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,
   0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26

   0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,
   0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27

   0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,
   0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28

   0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
   0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29

   0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
   0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30

   0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,
   0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31

   0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,
   0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32

   0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,
   0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33

   0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,
   0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34

   0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,
   0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35

   0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,
   0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36

   0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,
   0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37

   0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,
   0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38

   0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,
   0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39

   0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,
   0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40

   0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,
   0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41

   0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,
   0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42

   0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,
   0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43

   0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,
   0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44

   0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,
   0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45

   0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,
   0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46

   0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,
   0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47

   0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,
   0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48

   0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,
   0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49

   0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,
   0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50

   0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,
   0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51

   0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,
   0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52

   0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,
   0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53

   0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,
   0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54

   0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,
   0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55

   0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,
   0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56

   0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,
   0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57

   0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,
   0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58

   0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,
   0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59

   0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,
   0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60

   0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
   0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61

   0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,
   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62

   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
   0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63

   0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,
   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64

   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
   0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65

   0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,
   0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66

   0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,
   0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67

   0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,
   0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68

   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
   0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69

   0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,
   0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70

   0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
   0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71

   0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
   0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72

   0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,
   0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73

   0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,
   0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74

   0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,
   0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75

   0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,
   0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76

   0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
   0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77

   0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
   0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78

   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
   0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79

   0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,
   0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80

   0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,
   0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81

   0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,
   0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82

   0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
   0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83

   0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,
   0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84

   0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,
   0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85

   0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,
   0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86

   0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,
   0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87

   0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,
   0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88

   0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,
   0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89

   0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
   0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90

   0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,
   0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91

   0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,
   0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92

   0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,
   0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93

   0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,
   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};