CST学习：CST DS中根据电路对3D model进行S参数仿真设置

To set up a 3D model, a so called Simulation project must be created.

注：仿真项目是一个完整的.cst项目，是通过使用原理图的装配信息自动创建的。此外，所有必要的求解器设置和可能的进一步结构修改都可以在这里完成。

一般来说，仿真项目的三维结构与原理图中的块相联系，这样，块中的参数变化也会传播到仿真项目中，并由仿真项目反映出来。

第一种创建方法：

1.打开Task

双击Simulation...

如图所示

The buttons are grouped in different tabs as follows:

3D Model : Considers the selected blocks as 3D 

Schematic Model : Considers the selected blocks as schematic elements 

Ignore in Simulation : Ignores the selected blocks 

Create Simulation Project : Ends the simulation project mode by creating a simulation project 

Close Simulation Project Mode : Exits the simulation project mode without creating a simulation project 

注：只有那些被视为3D model的块才会被链接到主项目上。作为原理图元素创建的块会被复制。

2.选择

在原理图中：

框选或者直接ctrl+a全选，选择后可以看到未激活模块被激活

在Assembly（装配）中： 

在NT里展开Blocks,按住shift全选blocks

可以看到， 选择后未激活模块被激活

3.选择后单击3D Model,此时3D Model会变为未激活状态

4. 点击Create...,打开设置对话框

第二种创建方法：

在Home》Simulation

选择block后，选择All...as 3D...,同样会打开设置对话框

求解设置：

默认大伙能看懂英文

The appearing dialog box allows the specification of some simulation project properties. Please choose Full_3D as Name and select High Frequency as Project type. Since we want to simulate a planar microstrip filter structure we should define a template that sets several solver settings specific to this kind of structure. Select Select template… in the Project template drop down box. A new dialog box opens that allows either to select an already existing template or to create a new one. Let us quickly create an appropriate new template: 

Press New Template… 

Click on the MICROWAVES & RF / OPTICAL piece in the pie chart 

Double click on Circuit & Components 

Double click on Planar Filters

Double click on Frequency Domain (Fast Reduced Order)

(If the FD-Solver is not included in your license, you may choose any other listed solver)

Leave all unit settings unchanged and click Next 

Ignore all additional settings in the page and directly press Next

Specify My Planar Filter as template name and press Finish to leave this dialog box

单击OK

Make sure that the Frequency Domain solver is selected and then finalize the dialog settings by choosing Task: SPara1 as Reference model for global settings.

点击确定，可以看到在微波工作室生成了3D模型（这么说不太准确） 

因为个人电脑的问题，导致无法进行仿真，但按照教程里说的，微波工作室仿真S参数的结果应该与设计工作室里的是一致的。