Cadence Virtuoso IC618 AC仿真测量电容的基本原理是利用电容的阻抗特性,仿真测量流过电容的电流值,通过设置合适的频率以及交流电压值,使得电流值和被测电容在数值上相等。
电容阻抗的计算公式为:,其中为电容阻抗,为频率,为电容值。假设流过电容的电流为,施加在电容两侧的AC电压为,那么。因此,在仿真时我们可以固定,并且固定,那么此时流过电容的电流在数值上与电容值相等,这样就通过测量电流值间接地测量出电容值。
下面搭建仿真环境,使用的仿真平台为Cadence Virtuoso IC618,仿真电路图如下所示:
设定电压源的DC值为、AC值为1,待测电容从标准单元库中调入并设定为15。
仿真设置如下所示:
1、设置设计变量,将添加到ADE中并设初值为0。
2、选择分析器,AC仿真,固定频率,选择扫描变量,扫描范围为-2.8~2.8。
3、设置输出结果,选择From Design,点击待测电容的PLUS端,并在Outputs中勾选Plot。
运行ADE,得到输出结果如下所示:
仿真得到电流值为15.0009,非常接近待测电容值15。