转载自http://blog.csdn.net/seadplus/article/details/7802346
C++文件流:
- fstream // 文件流
- ifstream // 输入文件流
- ofstream // 输出文件流
- #include <fstream>
- //创建一个文本文件并写入信息
- //同向屏幕上输出信息一样将信息输出至文件
- #include<iomanip.h>
- #include<fstream>
- void main()
- {
- ofstream ofs("C:\\example.txt"); //打开文件用于写,若文件不存在就创建它
- if (!ofs) return; //打开文件失败则结束运行
- f1 << setw(20) << "Name: " << "Beethoven" << endl; //使用插入运算符写文件内容
- f1 << setw(20) << "song: " << "Moonlight Sonata" << endl;
- f1.close(); //关闭文件
- }
文件操作:
打开文件
文件名
注意路径名中的斜杠要双写,如:
"D:\\MyFiles\\ReadMe.txt"
文件打开方式选项:
- ios::in = 0x01, //供读,文件不存在则创建(ifstream默认的打开方 式)
- ios::out = 0x02, //供写,文件不存在则创 建,若文件已存在则清空原内容(ofstream默认的打开方式)
- ios::ate = 0x04, //文件打开时,指针在文件最后。可改变指针的位置,常和in、out联合使用
- ios::app = 0x08, //供写,文件不存在则创建,若文件已存在则在原文件内容后写入 新的内容,指针位置总在最后
- ios::trunc = 0x10, // 在读写前先将文件长度截断为0(默认)
- ios::nocreate = 0x20, //文件不存在时产生错误,常和in或app联合使用
- ios::noreplace = 0x40, //文件存在时产生错误,常和out联合使用
- ios::binary = 0x80 //二进制格式文件
文件保护方式选择项:
- filebuf::openprot; //默认的兼容共享方式
- filebuf::sh_none; //独占,不共享
- filebuf::sh_read; //读共享
- filebuf::sh_write; //写共享
打开文件的方法
调用构造函数时指定文件名和打开模式
- ifstream f("d:\\12.txt", ios::nocreate); //默认以 ios::in 的方式打开文件,文件不存在时操作失败
- ofstream f("d:\\12.txt"); //默认以 ios::out的方式打开文件
- fstream f("d:\\12.dat", ios::in|ios::out|ios::binary); //以读 写方式打开二进制文件
使用Open成员函数
- fstream f;
- f.open("d:\\12.txt",ios::out); //利用同一对象对多个文件进行操作时要用到open函数
检查是否成功打开
成功:
- if (f) {...} //对ifstream、ofstream对象可 用,fstream对象不可用。 mysql
- if (f.good()) {...}
失败:
- if (!f) {...} // !运算符已经重载
- if (f.fail()) {...}
读写操作
使 用<<,>>运算符
只能进行文本文件的读写操作,用于二进制文件可能会产生错误。
使用函数成员 get、put、read、write等
经常和read配合使用的函数是 gcount(),用来获得实际读取的字节数。
读写二进制文件注意事项
打开方式中必须指定ios::binary,否则读写会出错
用read\write进行读写操作,而不能使用插入、提取运算符进行操作,否则 会出错。
使用eof()函数检测文件是否读结束,使用gcount()获得实际读取的字节数
关闭文件
使用成员函数close, 如: oracle
f.close();
利用析构函数
对象生命期结 束时会检查文件是否关闭,对没有关闭的文件进行关闭操作。
随机读写文件
通过移动文件读写指针,可在文件指定位置进行读写。
- seekg(绝对位置); //绝对移动, //输入流操作
- seekg(相对位置,参照位置); //相对操作
- tellg(); //返回当前指针位置
- seekp(绝对位置); //绝对移动, //输出流操作
- seekp(相对位置,参照位置); //相对操作
- tellp(); //返回当前指针位置
参照位置: mysql
- ios::beg = 0 //相对于文件头
- ios::cur = 1 //相对于当前位置
- ios::end = 2 //相对于文件尾
写文本文件的示例
//为能够正确读出写入文件的各数据,各数据间最好要有分隔
- #include<fstream>
- void main()
- {
- fstream f("d:\\try.txt", ios::out);
- f << 1234 << ' ' << 3.14 << 'A' << "How are you"; //写入数据
- f.close();
- f.open("d:\\try.txt", ios::in);
- int i;
- double d;
- char c;
- char s[20];
- f >> i >> d >> c; //读取数据
- f.getline(s,20);
- cout << i << endl; //显示各数据
- cout <<d << endl;
- cout << c << endl;
- cout << s << endl;
- f.close();
- }
运 行结果:
1234
3.14
A
How are you
Press any key to continue
显示文本文件的内容
- //使用get()一次读一个字符--------------------------------方案一
- #include<fstream>
- void main()
- {
- ifstream fin("d:\\简介.txt", ios::nocreate);
- if (!fin) {
- cout << "File open error!\n";
- return;
- }
- char c;
- while ((c=fin.get()) != EOF) cout << c; //注意结束条件的判断
- fin.close();
- }
//使用get(char *,int n,char delim='\n')一次读多个字符----方案二
//巧妙利用文本文件中不会有字符'\0'的特点进行读取
- #include<fstream>
- void main()
- {
- ifstream fin("d:\\简介.txt",ios::nocreate);
- if(!fin){
- cout<<"File open error!\n";
- return;
- }
- char c[80];
- while(fin.get(c,80,'\0')!=NULL)cout<<c; //注意结束条件的判断
- fin.close();
- }
- //使用read(char *,int n)读文件---------------------------方案三
- #include<fstream.h>
- void main()
- {
- ifstream fin("d:\\简介.txt",ios::nocreate);
- if(!fin){
- cout<<"File open error!\n";
- return;
- }
- char c[80];
- while(!fin.eof()) //判 断文件是否读结束
- {
- fin.read(c,80);
- cout.write(c,fin.gcount());
- }
- fin.close();
- }
拷贝文件
//二进制文件操作示例 ssh
- #include<fstream>
- void main()
- {
- ifstream fin("C:\\1.exe", ios::nocreate|ios::binary);
- if (!fin) {
- cout << "File open error!\n";
- return;
- }
- ofstream fout("C:\\2.exe", ios::binary);
- char c[1024];
- while (!fin.eof())
- {
- fin.read(c, 1024);
- fout.write(c, fin.gcount());
- }
- fin.close();
- fout.close();
- cout << "Copy over!\n";
- }
一个打开并检查输入文件的程序:
- #include<iostream>
- #include<fstream>
- #include<string>
- using namespace std;
- ifstream& open_file(ifstream &in,const string &file)
- {
- in.close();
- in.clear();
- in.open(file.c_str());
- return in;
- }
- int main()
- {
- ifstream file;
- open_file(file,"1.txt");
- string s;
- while(getline(file,s))
- {
- cout<<s<<endl;
- }
- file.close();
- return 0;
- }