stm32f10x_tim.h部分函数含义解释

 TIM函数具有特别多的函数，在学习完TIM之后，总结一下函数含义

void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
//时基单元配置

void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
//PWM输出比较库函数，对应四个通道

void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
//输入捕获通道初始化

void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
//PWMI模式配置，此模式可将在该函数中会快捷地将另一个通道初始化为“相反”的配置，如配置好了TI1FP1，会自动配置TI1FP2为相反的配置

void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
//时基单元结构体配置

void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct);
//输出比较赋默认值

void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct);
//输入捕获赋默认值

void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState);/
/开启定时器！

void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState);
//开启定时中断

void TIM_InternalClockConfig(TIM_TypeDef* TIMx);
//选择内部时钟源

void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
//其他定时器作为时钟源，可用作级联

void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
                                uint16_t TIM_ICPolarity, uint16_t ICFilter);
//TIx捕获通道作为时钟源

void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
                             uint16_t ExtTRGFilter);
//外部时钟模式1

void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, 
                             uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter);
//外部时钟模式2

void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
                   uint16_t ExtTRGFilter);
//配置TIMx外部触发器(ETR)。

void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
//选择输入触发器源

void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
                                uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity);
//配置TIMx编码器接口。

void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode);
//从模式执行命令选择

void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter);
//设置TIMx计数器寄存器值（CNT）

void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload);
//设置TIMx自动加载寄存器值（ARR）

void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1);
void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2);
void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3);
void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4);
//设置输出比较值函数，数字代表对应的通道(CCR)

uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx);
uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx);
uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx);
uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx);
//获取TIMx输入捕获值.数字代表对应的通道(CCR)

uint16_t TIM_GetCounter(TIM_TypeDef* TIMx);
//获取定时器计数值(CNT)

uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx);
//获取TIMx预分频器值（PSC）

ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT);
//检查TIM中断是否发生，中断产生会更新中断标志位

void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT);
//清除更新中断标志位

后续会逐渐更新