PM861AK01 3BSE018157R1 FOUNDATION Fieldbus连接到AC 800M控制器

PM860K01、PM860AK01、PM861K01、PM861AK01、PM864K01、pm 864AK01和PM865K01。

控制网络连接到一个或两个RJ45连接器（CN1和CN2），具体取决于网络选项（单个或冗余）。使用IEEE802.3（以太网）的RJ45连接器连接到5类屏蔽双绞线（STP 5级）。5级或更高等级电缆10/100BaseT/TX，最大100米（110码）。ABB建议在工业环境中使用光纤，例如62.5/125 100BaseFX，最大距离1500米（1600码）。

除非另有说明，否则PM851等同于PM856。
除非另有说明，否则PM851A等同于PM851。
除非另有说明，否则PM856A等同于PM856。
除非另有说明，否则PM860A等同于PM860
除非另有说明，否则PM861A等同于PM861。
除非另有说明，否则PM864A等同于PM864。

当配备指定的控制软件时，AC 800M控制器既可以作为独立的过程控制器，也可以作为在由许多互连控制器、操作员站和服务器组成的控制网络中执行本地控制任务的控制器。各种I/O系统可以直接（S800 I/O）或通过PROFIBUS DP或FOUNDATION Fieldbus连接到AC 800M控制器。AC 800M交付时不带控制软件。要为控制器提供控制软件，首先加载固件，然后使用Control Builder M工程工具单独创建应用程序。

AC 800M控制器由安装在水平DIN导轨上的一系列单元组成，这些单元可以安装在外壳内。大多数装置由底座安装板和用螺钉连接的可拆卸盖子组成。基板始终安装在DIN导轨上，承载与处理器、电源和通信接口的大部分连接，以及与外部总线和系统的连接。

Emerson (Fisher rosemount) has also incorporated its DCS system DeltaV into the PlantWeb control network architecture, committed to building a new generation of DCS and digital factories. The latest DeltaV8.4 version also enhances the intelligent safety instrument system (DeltaVTMSIS complies with IEC 61511 safety certification), improves precise control, operation, and batch processing capabilities, supports abnormal situation prevention for HART communication, and is more open and utilizes interactive solutions and SureService technology support.
Yokogawa fully considers the continuity of control, network security, convenience of maintenance, and network performance in surpassing DCS. Its CENTUM now releases the latest version 3.08 of CS 3000 R3, which has multiple enhanced functions and embedded DCS software, which can achieve the integration of various data usage throughout the factory and build an operating environment that can effectively monitor the operation of the factory. It also introduces alarm and event integration functions, which can transmit accurate alarms to designated personnel in the first time to ensure the safe operation of the factory. CAMS (Consolidated Alarm Management Software) for HIS (Human Interface Station), based on the concept of CAMS (Consolidated Alarm Management System), is specifically designed for alarm integration. The real-time alarm management function provided is combined with DCS and has multiple alarm management solutions. This is a feature of Yokogawa's new system. At the same time, the system integration OPC * station (SIOS) gateway function has been enhanced, which can integrate and monitor other manufacturers' DCS and PLCs.