吴恩达deeplearning.ai课程作业,自己写的答案。
补充说明:
1. 评论中总有人问为什么直接复制这些notebook运行不了?请不要直接复制粘贴,不可能运行通过的,这个只是notebook中我们要自己写的那部分,要正确运行还需要其他py文件,请自己到GitHub上下载完整的。这里的部分仅仅是参考用的,建议还是自己按照提示一点一点写,如果实在卡住了再看答案。个人觉得这样才是正确的学习方法,况且作业也不算难。
2. 关于评论中有人说我是抄袭,注释还没别人详细,复制下来还运行不过。答复是:做伸手党之前,请先搞清这个作业是干什么的。大家都是从GitHub上下载原始的作业,然后根据代码前面的提示(通常会指定函数和公式)来编写代码,而且后面还有expected output供你比对,如果程序正确,结果一般来说是一样的。请不要无脑喷,说什么跟别人的答案一样的。说到底,我们要做的就是,看他的文字部分,根据提示在代码中加入部分自己的代码。我们自己要写的部分只有那么一小部分代码。
3. 由于实在很反感无脑喷子,故禁止了下面的评论功能,请见谅。如果有问题,请私信我,在力所能及的范围内会尽量帮忙。
Face Recognition for the Happy House
Welcome to the first assignment of week 4! Here you will build a face recognition system. Many of the ideas presented here are from FaceNet. In lecture, we also talked about DeepFace.
Face recognition problems commonly fall into two categories:
- Face Verification - “is this the claimed person?”. For example, at some airports, you can pass through customs by letting a system scan your passport and then verifying that you (the person carrying the passport) are the correct person. A mobile phone that unlocks using your face is also using face verification. This is a 1:1 matching problem.
- Face Recognition - “who is this person?”. For example, the video lecture showed a face recognition video (https://www.youtube.com/watch?v=wr4rx0Spihs) of Baidu employees entering the office without needing to otherwise identify themselves. This is a 1:K matching problem.
FaceNet learns a neural network that encodes a face image into a vector of 128 numbers. By comparing two such vectors, you can then determine if two pictures are of the same person.
In this assignment, you will:
- Implement the triplet loss function
- Use a pretrained model to map face images into 128-dimensional encodings
- Use these encodings to perform face verification and face recognition
In this exercise, we will be using a pre-trained model which represents ConvNet activations using a “channels first” convention, as opposed to the “channels last” convention used in lecture and previous programming assignments. In other words, a batch of images will be of shape (m,nC,nH,nW) ( m , n C , n H , n W ) instead of (m,nH,nW,nC) ( m , n H , n W , n C ) . Both of these conventions have a reasonable amount of traction among open-source implementations; there isn’t a uniform standard yet within the deep learning community.
Let’s load the required packages.
from keras.models import Sequential
from keras.layers import Conv2D, ZeroPadding2D, Activation, Input, concatenate
from keras.models import Model
from keras.layers.normalization import BatchNormalization
from keras.layers.pooling import MaxPooling2D, AveragePooling2D
from keras.layers.merge import Concatenate
from keras.layers.core import Lambda, Flatten, Dense
from keras.initializers import glorot_uniform
from keras.engine.topology import Layer
from keras import backend as K
K.set_image_data_format('channels_first')
import cv2
import os
import numpy as np
from numpy import genfromtxt
import pandas as pd
import tensorflow as tf
from fr_utils import *
from inception_blocks_v2 import *
%matplotlib inline
%load_ext autoreload
%autoreload 2
np.set_printoptions(threshold=np.nan)
Using TensorFlow backend.
0 - Naive Face Verification
In Face Verification, you’re given two images and you have to tell if they are of the same person. The simplest way to do this is to compare the two images pixel-by-pixel. If the distance between the raw images are less than a chosen threshold, it may be the same person!
Of course, this algorithm performs really poorly, since the pixel values change dramatically due to variations in lighting, orientation of the person’s face, even minor changes in head position, and so on.
You’ll see that rather than using the raw image, you can learn an encoding f(img) f ( i m g ) so that element-wise comparisons of this encoding gives more accurate judgements as to whether two pictures are of the same person.
1 - Encoding face images into a 128-dimensional vector
1.1 - Using an ConvNet to compute encodings
The FaceNet model takes a lot of data and a long time to train. So following common practice in applied deep learning settings, let’s just load weights that someone else has already trained. The network architecture follows the Inception model from Szegedy et al.. We have provided an inception network implementation. You can look in the file inception_blocks.py
to see how it is implemented (do so by going to “File->Open…” at the top of the Jupyter notebook).
The key things you need to know are:
- This network uses 96x96 dimensional RGB images as its input. Specifically, inputs a face image (or batch of m m face images) as a tensor of shape
- It outputs a matrix of shape (m,128) ( m , 128 ) that encodes each input face image into a 128-dimensional vector
Run the cell below to create the model for face images.
FRmodel = faceRecoModel(input_shape=(3, 96, 96))
print("Total Params:", FRmodel.count_params())
Total Params: 3743280
Expected Output
By using a 128-neuron fully connected layer as its last layer, the model ensures that the output is an encoding vector of size 128. You then use the encodings the compare two face images as follows:
By computing a distance between two encodings and thresholding, you can determine if the two pictures represent the same person
So, an encoding is a good one if:
- The encodings of two images of the same person are quite similar to each other
- The encodings of two images of different persons are very different
The triplet loss function formalizes this, and tries to “push” the encodings of two images of the same person (Anchor and Positive) closer together, while “pulling” the encodings of two images of different persons (Anchor, Negative) further apart.
In the next part, we will call the pictures from left to right: Anchor (A), Positive (P), Negative (N)
1.2 - The Triplet Loss
For an image x x , we denote its encoding , where f f is the function computed by the neural network.
Training will use triplets of images :
- A is an “Anchor” image–a picture of a person.
- P is a “Positive” image–a picture of the same person as the Anchor image.
- N is a “Negative” image–a picture of a different person than the Anchor image.
These triplets are picked from our training dataset. We will write (A(i),P(i),N(i)) ( A ( i ) , P ( i ) , N ( i ) ) to denote the i i -th training example.
You’d like to make sure that an image of an individual is closer to the Positive P(i) P ( i ) than to the Negative image N(i) N ( i ) ) by at least a margin α α :
You would thus like to minimize the following “triplet cost”:
Here, we are using the notation “ [z]+ [ z ] + ” to denote max(z,0) m a x ( z , 0 ) .
Notes:
- The term (1) is the squared distance between the anchor “A” and the positive “P” for a given triplet; you want this to be small.
- The term (2) is the squared distance between the anchor “A” and the negative “N” for a given triplet, you want this to be relatively large, so it thus makes sense to have a minus sign preceding it.
-
α
α
is called the margin. It is a hyperparameter that you should pick manually. We will use
α=0.2
α
=
0.2
.
Most implementations also normalize the encoding vectors to have norm equal one (i.e., ∣∣f(img)∣∣2 ∣ ∣ f ( i m g ) ∣ ∣ 2 =1); you won’t have to worry about that here.
Exercise: Implement the triplet loss as defined by formula (3). Here are the 4 steps:
1. Compute the distance between the encodings of “anchor” and “positive”:
∣∣f(A(i))−f(P(i))∣∣22
∣
∣
f
(
A
(
i
)
)
−
f
(
P
(
i
)
)
∣
∣
2
2
2. Compute the distance between the encodings of “anchor” and “negative”:
∣∣f(A(i))−f(N(i))∣∣22
∣
∣
f
(
A
(
i
)
)
−
f
(
N
(
i
)
)
∣
∣
2
2
3. Compute the formula per training example:
∣∣f(A(i))−f(P(i))∣−∣∣f(A(i))−f(N(i))∣∣22+α
∣
∣
f
(
A
(
i
)
)
−
f
(
P
(
i
)
)
∣
−
∣∣
f
(
A
(
i
)
)
−
f
(
N
(
i
)
)
∣
∣
2
2
+
α
3. Compute the full formula by taking the max with zero and summing over the training examples:
Useful functions: tf.reduce_sum()
, tf.square()
, tf.subtract()
, tf.add()
, tf.maximum()
.
For steps 1 and 2, you will need to sum over the entries of
∣∣f(A(i))−f(P(i))∣∣22
∣
∣
f
(
A
(
i
)
)
−
f
(
P
(
i
)
)
∣
∣
2
2
and
∣∣f(A(i))−f(N(i))∣∣22
∣
∣
f
(
A
(
i
)
)
−
f
(
N
(
i
)
)
∣
∣
2
2
while for step 4 you will need to sum over the training examples.
# GRADED FUNCTION: triplet_loss
def triplet_loss(y_true, y_pred, alpha = 0.2):
"""
Implementation of the triplet loss as defined by formula (3)
Arguments:
y_true -- true labels, required when you define a loss in Keras, you don't need it in this function.
y_pred -- python list containing three objects:
anchor -- the encodings for the anchor images, of shape (None, 128)
positive -- the encodings for the positive images, of shape (None, 128)
negative -- the encodings for the negative images, of shape (None, 128)
Returns:
loss -- real number, value of the loss
"""
anchor, positive, negative = y_pred[0], y_pred[1], y_pred[2]
### START CODE HERE ### (≈ 4 lines)
# Step 1: Compute the (encoding) distance between the anchor and the positive, you will need to sum over axis=-1
pos_dist = tf.reduce_sum(tf.square(tf.subtract(anchor, positive)), axis=-1, keep_dims=False)
# Step 2: Compute the (encoding) distance between the anchor and the negative, you will need to sum over axis=-1
neg_dist = tf.reduce_sum(tf.square(tf.subtract(anchor, negative)), axis=-1, keep_dims=False)
# Step 3: subtract the two previous distances and add alpha.
basic_loss = tf.add(tf.subtract(pos_dist, neg_dist), alpha)
# Step 4: Take the maximum of basic_loss and 0.0. Sum over the training examples.
loss = tf.reduce_sum(tf.maximum(basic_loss, 0))
### END CODE HERE ###
return loss
with tf.Session() as test:
tf.set_random_seed(1)
y_true = (None, None, None)
y_pred = (tf.random_normal([3, 128], mean=6, stddev=0.1, seed = 1),
tf.random_normal([3, 128], mean=1, stddev=1, seed = 1),
tf.random_normal([3, 128], mean=3, stddev=4, seed = 1))
loss = triplet_loss(y_true, y_pred)
print("loss = " + str(loss.eval()))
loss = 528.143
Expected Output:
loss | 528.143 |
2 - Loading the trained model
FaceNet is trained by minimizing the triplet loss. But since training requires a lot of data and a lot of computation, we won’t train it from scratch here. Instead, we load a previously trained model. Load a model using the following cell; this might take a couple of minutes to run.
FRmodel.compile(optimizer = 'adam', loss = triplet_loss, metrics = ['accuracy'])
load_weights_from_FaceNet(FRmodel)
Here’re some examples of distances between the encodings between three individuals:
Example of distance outputs between three individuals’ encodings
Let’s now use this model to perform face verification and face recognition!
3 - Applying the model
Back to the Happy House! Residents are living blissfully since you implemented happiness recognition for the house in an earlier assignment.
However, several issues keep coming up: The Happy House became so happy that every happy person in the neighborhood is coming to hang out in your living room. It is getting really crowded, which is having a negative impact on the residents of the house. All these random happy people are also eating all your food.
So, you decide to change the door entry policy, and not just let random happy people enter anymore, even if they are happy! Instead, you’d like to build a Face verification system so as to only let people from a specified list come in. To get admitted, each person has to swipe an ID card (identification card) to identify themselves at the door. The face recognition system then checks that they are who they claim to be.
3.1 - Face Verification
Let’s build a database containing one encoding vector for each person allowed to enter the happy house. To generate the encoding we use img_to_encoding(image_path, model)
which basically runs the forward propagation of the model on the specified image.
Run the following code to build the database (represented as a python dictionary). This database maps each person’s name to a 128-dimensional encoding of their face.
database = {}
database["danielle"] = img_to_encoding("images/danielle.png", FRmodel)
database["younes"] = img_to_encoding("images/younes.jpg", FRmodel)
database["tian"] = img_to_encoding("images/tian.jpg", FRmodel)
database["andrew"] = img_to_encoding("images/andrew.jpg", FRmodel)
database["kian"] = img_to_encoding("images/kian.jpg", FRmodel)
database["dan"] = img_to_encoding("images/dan.jpg", FRmodel)
database["sebastiano"] = img_to_encoding("images/sebastiano.jpg", FRmodel)
database["bertrand"] = img_to_encoding("images/bertrand.jpg", FRmodel)
database["kevin"] = img_to_encoding("images/kevin.jpg", FRmodel)
database["felix"] = img_to_encoding("images/felix.jpg", FRmodel)
database["benoit"] = img_to_encoding("images/benoit.jpg", FRmodel)
database["arnaud"] = img_to_encoding("images/arnaud.jpg", FRmodel)
Now, when someone shows up at your front door and swipes their ID card (thus giving you their name), you can look up their encoding in the database, and use it to check if the person standing at the front door matches the name on the ID.
Exercise: Implement the verify() function which checks if the front-door camera picture (image_path
) is actually the person called “identity”. You will have to go through the following steps:
1. Compute the encoding of the image from image_path
2. Compute the distance about this encoding and the encoding of the identity image stored in the database
3. Open the door if the distance is less than 0.7, else do not open.
As presented above, you should use the L2 distance (np.linalg.norm). (Note: In this implementation, compare the L2 distance, not the square of the L2 distance, to the threshold 0.7.)
# GRADED FUNCTION: verify
def verify(image_path, identity, database, model):
"""
Function that verifies if the person on the "image_path" image is "identity".
Arguments:
image_path -- path to an image
identity -- string, name of the person you'd like to verify the identity. Has to be a resident of the Happy house.
database -- python dictionary mapping names of allowed people's names (strings) to their encodings (vectors).
model -- your Inception model instance in Keras
Returns:
dist -- distance between the image_path and the image of "identity" in the database.
door_open -- True, if the door should open. False otherwise.
"""
### START CODE HERE ###
# Step 1: Compute the encoding for the image. Use img_to_encoding() see example above. (≈ 1 line)
encoding = img_to_encoding(image_path, model)
# Step 2: Compute distance with identity's image (≈ 1 line)
# print(encoding)
# print(database[identity])
# print(np.linalg.norm(encoding))
dist = np.linalg.norm(encoding - database[identity])
# Step 3: Open the door if dist < 0.7, else don't open (≈ 3 lines)
if dist < 0.7:
print("It's " + str(identity) + ", welcome home!")
door_open = True
else:
print("It's not " + str(identity) + ", please go away")
door_open = False
### END CODE HERE ###
return dist, door_open
Younes is trying to enter the Happy House and the camera takes a picture of him (“images/camera_0.jpg”). Let’s run your verification algorithm on this picture:
verify("images/camera_0.jpg", "younes", database, FRmodel)
It's younes, welcome home!
(0.67291224, True)
Expected Output:
It’s younes, welcome home! | (0.65939283, True) |
Benoit, who broke the aquarium last weekend, has been banned from the house and removed from the database. He stole Kian’s ID card and came back to the house to try to present himself as Kian. The front-door camera took a picture of Benoit (“images/camera_2.jpg). Let’s run the verification algorithm to check if benoit can enter.
verify("images/camera_2.jpg", "kian", database, FRmodel)
It's not kian, please go away
(0.86543161, False)
Expected Output:
It’s not kian, please go away | (0.86224014, False) |
3.2 - Face Recognition
Your face verification system is mostly working well. But since Kian got his ID card stolen, when he came back to the house that evening he couldn’t get in!
To reduce such shenanigans, you’d like to change your face verification system to a face recognition system. This way, no one has to carry an ID card anymore. An authorized person can just walk up to the house, and the front door will unlock for them!
You’ll implement a face recognition system that takes as input an image, and figures out if it is one of the authorized persons (and if so, who). Unlike the previous face verification system, we will no longer get a person’s name as another input.
Exercise: Implement who_is_it()
. You will have to go through the following steps:
1. Compute the target encoding of the image from image_path
2. Find the encoding from the database that has smallest distance with the target encoding.
- Initialize the min_dist
variable to a large enough number (100). It will help you keep track of what is the closest encoding to the input’s encoding.
- Loop over the database dictionary’s names and encodings. To loop use for (name, db_enc) in database.items()
.
- Compute L2 distance between the target “encoding” and the current “encoding” from the database.
- If this distance is less than the min_dist, then set min_dist to dist, and identity to name.
# GRADED FUNCTION: who_is_it
def who_is_it(image_path, database, model):
"""
Implements face recognition for the happy house by finding who is the person on the image_path image.
Arguments:
image_path -- path to an image
database -- database containing image encodings along with the name of the person on the image
model -- your Inception model instance in Keras
Returns:
min_dist -- the minimum distance between image_path encoding and the encodings from the database
identity -- string, the name prediction for the person on image_path
"""
### START CODE HERE ###
## Step 1: Compute the target "encoding" for the image. Use img_to_encoding() see example above. ## (≈ 1 line)
encoding = img_to_encoding(image_path, model)
## Step 2: Find the closest encoding ##
# Initialize "min_dist" to a large value, say 100 (≈1 line)
min_dist = 100
# Loop over the database dictionary's names and encodings.
for (name, db_enc) in database.items():
# Compute L2 distance between the target "encoding" and the current "emb" from the database. (≈ 1 line)
dist = np.linalg.norm(encoding - db_enc)
# If this distance is less than the min_dist, then set min_dist to dist, and identity to name. (≈ 3 lines)
if dist < min_dist:
min_dist = dist
identity = name
### END CODE HERE ###
if min_dist > 0.7:
print("Not in the database.")
else:
print ("it's " + str(identity) + ", the distance is " + str(min_dist))
return min_dist, identity
Younes is at the front-door and the camera takes a picture of him (“images/camera_0.jpg”). Let’s see if your who_it_is() algorithm identifies Younes.
who_is_it("images/camera_0.jpg", database, FRmodel)
it's younes, the distance is 0.672912
(0.67291224, 'younes')
Expected Output:
it’s younes, the distance is 0.659393 | (0.65939283, ‘younes’) |
You can change “camera_0.jpg
” (picture of younes) to “camera_1.jpg
” (picture of bertrand) and see the result.
Your Happy House is running well. It only lets in authorized persons, and people don’t need to carry an ID card around anymore!
You’ve now seen how a state-of-the-art face recognition system works.
Although we won’t implement it here, here’re some ways to further improve the algorithm:
- Put more images of each person (under different lighting conditions, taken on different days, etc.) into the database. Then given a new image, compare the new face to multiple pictures of the person. This would increae accuracy.
- Crop the images to just contain the face, and less of the “border” region around the face. This preprocessing removes some of the irrelevant pixels around the face, and also makes the algorithm more robust.
What you should remember:
- Face verification solves an easier 1:1 matching problem; face recognition addresses a harder 1:K matching problem.
- The triplet loss is an effective loss function for training a neural network to learn an encoding of a face image.
- The same encoding can be used for verification and recognition. Measuring distances between two images’ encodings allows you to determine whether they are pictures of the same person.
Congrats on finishing this assignment!
References:
- Florian Schroff, Dmitry Kalenichenko, James Philbin (2015). FaceNet: A Unified Embedding for Face Recognition and Clustering
- Yaniv Taigman, Ming Yang, Marc’Aurelio Ranzato, Lior Wolf (2014). DeepFace: Closing the gap to human-level performance in face verification
- The pretrained model we use is inspired by Victor Sy Wang’s implementation and was loaded using his code: https://github.com/iwantooxxoox/Keras-OpenFace.
- Our implementation also took a lot of inspiration from the official FaceNet github repository: https://github.com/davidsandberg/facenet