UFLDL教程之（三）PCA and Whitening exercise

Exercise:PCA and Whitening

第0步：数据准备

UFLDL下载的文件中，包含数据集IMAGES_RAW，它是一个512*512*10的矩阵，也就是10幅512*512的图像

（a）载入数据

利用sampleIMAGESRAW函数，从IMAGES_RAW中提取numPatches个图像块儿，每个图像块儿大小为patchSize，并将提取到的图像块儿按列存放，分别存放在在矩阵patches的每一列中，即patches(:,i)存放的是第i个图像块儿的所有像素值

（b）数据去均值化处理

将每一个图像块儿的所有像素值都减去该图像块儿的平均像素值，实现数据的去均值化

 下图是显示的随机选取的图像块儿

第一步：执行PCA

该部分分为两部分

（1）进行PCA计算，这里仅仅对数据x进行旋转得到xrot，而不进行主成分的提取

具体地：

①计算数据x的协方差矩阵sigma

             

②对sigma进行特征分解，利用matlab的eig函数，从而得到sigma的特征向量构成的矩阵U

[U,S,V]=eig(sigma);

U=[u1,...,ui,...,un]，它的每一列分别是sigma的特征向量，n是输入数据的特征维数

S=diag([λ1,...λi,...,λn])是由sigma的特征值作为对角元素的对角阵，ui和λi相对应；

为了后续的计算，这里要将U的各列次序进行调换，使得调换后的各列所对应的特征值大小依次递减;

调换后的矩阵仍记作U，相应的特征值对角阵仍即为S，即：

U=[u1,...,ui,...,un]，S=diag([λ1,...λi,...,λn])，满足：λ1>=...>=λi>=...>=λn

 ③利用矩阵U对数据x进行旋转，得到xrot，即xrot=U‘*x

（2）对旋转后的数据求解协方差矩阵covar，并将其可视化，观察得到的选择后的数据是否正确

PCA保证选择后的数据的协方差矩阵是一个对角阵，如果covar是正确的

那么它的图像应该是一个蓝色背景，并且在对角线位置有一斜线

这里显示协方差矩阵covar利用了matlab的imagesc，该函数真的很强大呀

imagesc(covar)的作用是：把矩阵covar以图像形式显示出来，矩阵中不同的数值会被赋予不同的颜色

得到的协方差矩阵的图像如下：可以看到，图像处了对角线位置外，其余部分颜色都相同

　　

 

第二步：满足条件的主成分个数

本部分，找到满足条件的主成分的个数k

也就是找到最小的k值，使得(λ1+...+ λk)/(λ1+...+ λn)>某个百分数，如99%

 

第三步：利用找到的主成分个数，对数据进行降维

在第二步，已经找到了数字k，也就是，保留数据的k个主成分就满足了要求

在该步，将对数据x进行降维，只留下k个主成分，得到xTidle

同时，为了观察降维后的数据的好坏，在利用U(:,k)将降维后的数据变换会原来的维数，也就是得到了原数据的近似恢复数据

并利用网格将恢复出的图像显示出，与原图像进行比较，下面第一幅图是由降维后的图像恢复出的原数据，下图是相应的原数据，可以发现，降维后的数据基本可以恢复出于原数据非常相近的数据

第四步：PCA白化+正则化

该部分分为两步

（1）执行具有白化和正则化的PCA

首先，对数据进行旋转（利用特征矩阵U）

然后，利用特征值对旋转后的数据进行缩放，实现白化

同时，在利用特征值缩放时，利用参数ε对特征值进行微调，实现正则化

（b）计算百化后的数据的协方差矩阵，观察该协方差矩阵

如果加入了正则化项，则该协方差矩阵的对角线元素都小于1

如果没有加入正则项（即仅有旋转+白化），则该协方差矩阵的对角线元素都为1（实际上，是令ε为一个极小的数）

下图是白化后数据的协方差矩阵对应的图像，上图是加入正则化后的结果，下图是没有加入正则化后的结果

 

第五步：ZCA白化

ZCA白化，就是在PCA白化的基础上做了一个旋转，即

下面的第一幅图是ZCA白化后的结果图，第二幅图是相应的原始图像

可以看到，ZCA白化的结果图似乎是原始图像的边缘

下面，是该部分的pca_gen的代码

clc
clear
close all

%%================================================================
%% Step 0a: Load data
%  Here we provide the code to load natural image data into x.
%  x will be a 144 * 10000 matrix, where the kth column x(:, k) corresponds to
%  the raw image data from the kth 12x12 image patch sampled.
%  You do not need to change the code below.
x = sampleIMAGESRAW();%从IMAGES_RAW中读取一些图像patches
figure('name','Raw images');%显示一个figure，标题为raw images
randsel = randi(size(x,2),200,1); % A random selection of samples for visualization
display_network(x(:,randsel));%显示随机选取的图像块儿
%% Step 0b: Zero-mean the data (by row)
%  You can make use of the mean and repmat/bsxfun functions.
% -------------------- YOUR CODE HERE -------------------- 
x=x-repmat(mean(x),size(x,1),1);%x的每一列的所有元素都减去该列的均值


%%================================================================
%% Step 1a: Implement PCA to obtain xRot
%  Implement PCA to obtain xRot, the matrix in which the data is expressed
%  with respect to the eigenbasis of sigma, which is the matrix U.
% -------------------- YOUR CODE HERE -------------------- 
xRot = zeros(size(x)); % You need to compute this
% 计算协方差矩阵并进行特征值分解
m=size(x,2);% 输入的样本个数
sigma=x*x'/m;%输入数据的协方差矩阵
[U,S,V]=eig(sigma);%对协方差矩阵进行特征值分解
[S_Value,S_Index]=sort(diag(S),'descend');%提取S的对角线元素，将其按降序排列，sIndex是排序后的编号
U=U(:,S_Index);
S=diag(S_Value);
% 对数据进行旋转
xRot=U'*x;

%% Step 1b: Check your implementation of PCA
%  The covariance matrix for the data expressed with respect to the basis U
%  should be a diagonal matrix with non-zero entries only along the main
%  diagonal. We will verify this here.
%  Write code to compute the covariance matrix, covar. 
%  When visualised as an image, you should see a straight line across the
%  diagonal (non-zero entries) against a blue background (zero entries).
% -------------------- YOUR CODE HERE -------------------- 
covar = zeros(size(x, 1)); % You need to compute this
covar=xRot*xRot'/m;%旋转数据后的数据对应的协方差矩阵
% Visualise the covariance matrix. You should see a line across the
% diagonal against a blue background.
figure('name','Visualisation of covariance matrix');
imagesc(covar);

%%================================================================
%% Step 2: Find k, the number of components to retain
%  Write code to determine k, the number of components to retain in order
%  to retain at least 99% of the variance.
% -------------------- YOUR CODE HERE -------------------- 
k = 0; % Set k accordingly
S_diag=diag(S);
S_sum=sum(S_diag);
for k=1:size(x,1)
    Sk_sum=sum(S_diag(1:k));
    if Sk_sum/S_sum>=0.99
        break;
    end
end

%%================================================================
%% Step 3: Implement PCA with dimension reduction
%  Now that you have found k, you can reduce the dimension of the data by
%  discarding the remaining dimensions. In this way, you can represent the
%  data in k dimensions instead of the original 144, which will save you
%  computational time when running learning algorithms on the reduced
%  representation.
% 
%  Following the dimension reduction, invert the PCA transformation to produce 
%  the matrix xHat, the dimension-reduced data with respect to the original basis.
%  Visualise the data and compare it to the raw data. You will observe that
%  there is little loss due to throwing away the principal components that
%  correspond to dimensions with low variation.

% -------------------- YOUR CODE HERE -------------------- 
% 对数据进行降维
xTidle=U(:,1:k)'*x;
% 利用降维后的数据xTidle对数据进行恢复
xHat = zeros(size(x));  % You need to compute this
xHat = U*[xTidle;zeros(m-k,size(x,2))];

% Visualise the data, and compare it to the raw data
% You should observe that the raw and processed data are of comparable quality.
% For comparison, you may wish to generate a PCA reduced image which
% retains only 90% of the variance.

figure('name',['PCA processed images ',sprintf('(%d / %d dimensions)', k, size(x, 1)),'']);
display_network(xHat(:,randsel));
figure('name','Raw images');
display_network(x(:,randsel));

%%================================================================
%% Step 4a: Implement PCA with whitening and regularisation
%  Implement PCA with whitening and regularisation to produce the matrix
%  xPCAWhite. 
epsilon =0.000001;
% -------------------- YOUR CODE HERE -------------------- 
xPCAWhite = zeros(size(x));
xPCAWhite=diag(1./sqrt(S_diag+epsilon))*xRot;
%% Step 4b: Check your implementation of PCA whitening 
%  Check your implementation of PCA whitening with and without regularisation. 
%  PCA whitening without regularisation results a covariance matrix 
%  that is equal to the identity matrix. PCA whitening with regularisation
%  results in a covariance matrix with diagonal entries starting close to 
%  1 and gradually becoming smaller. We will verify these properties here.
%  Write code to compute the covariance matrix, covar. 
%
%  Without regularisation (set epsilon to 0 or close to 0), 
%  when visualised as an image, you should see a red line across the
%  diagonal (one entries) against a blue background (zero entries).
%  With regularisation, you should see a red line that slowly turns
%  blue across the diagonal, corresponding to the one entries slowly
%  becoming smaller.
% -------------------- YOUR CODE HERE -------------------- 
covar=xPCAWhite*xPCAWhite'/m;
% Visualise the covariance matrix. You should see a red line across the
% diagonal against a blue background.
figure('name','Visualisation of covariance matrix');
imagesc(covar);

%%================================================================
%% Step 5: Implement ZCA whitening
%  Now implement ZCA whitening to produce the matrix xZCAWhite. 
%  Visualise the data and compare it to the raw data. You should observe
%  that whitening results in, among other things, enhanced edges.
xZCAWhite = zeros(size(x));
% -------------------- YOUR CODE HERE -------------------- 
xZCAWhite=U*xPCAWhite;%ZCA白化即在PCA白化基础上做了一个旋转
% Visualise the data, and compare it to the raw data.
% You should observe that the whitened images have enhanced edges.
figure('name','ZCA whitened images');
display_network(xZCAWhite(:,randsel));
figure('name','Raw images');
display_network(x(:,randsel));