minicom使用教程

minicom

这是个在Ubuntu下的串口通信工具

---

1/安装

sudo apt-get install minicom

2/插入串口

将USB转串口插入USB接口(硬件)

然后

ls /dev/ttyUSB*

如果USB转串口驱动加载成功,该命令会将/dev/目录下的USB转串口显示出来

如果显示

ttyUSB0

表示加载成功

如果显示

ls: cannot access /dev/ttyUSB*: No such file or directory

表示没有该USB转串口,自己调试到有为止

---

3/配置串口工具

sudo minicom -s

键入上述命令之后,出来一个这个

            +-----[configuration]------+
            | Filenames and paths      |
            | File transfer protocols  |
            | Serial port setup        |
            | Modem and dialing        |
            | Screen and keyboard      |
            | Save setup as dfl        |
            | Save setup as..          |
            | Exit                     |
            | Exit from Minicom        |
            +--------------------------+

按上下键选中Serial port setup ,敲击回车,会出来一个这个

    +-----------------------------------------------------------------------+
    | A -    Serial Device      : /dev/tty8                                 |
    | B - Lockfile Location     : /var/lock                                 |
    | C -   Callin Program      :                                           |
    | D -  Callout Program      :                                           |
    | E -    Bps/Par/Bits       : 115200 8N1                                |
    | F - Hardware Flow Control : Yes                                       |
    | G - Software Flow Control : No                                        |
    |                                                                       |
    |    Change which setting?                                              |
    +-----------------------------------------------------------------------+

键入a,然后修改为/dev/ttyUSB0,回车

键入e,修改波特率,校验位,停止位,回车

键入f,修改硬件流控制,然后回车

回车退出此设置

然后

上下键选中Save setup as dfl ,回车

然后

上下键选中Exit from Minicom,回车,就退出了配置

---

4/启动串口

sudo minicom

---