ros 发布信息频率_RouterOS中wifi自动频率选择及发射功率设置

1. 在routeros中，wifi使用的频率设置说明

DFS的全称是Dynamic Frequency Selection，即自动频率选择，只有在DFS Mode设置为None时，Frequency才有效，此时可以手工选择频率置。否则DFS会根据一定的算法自动选择工作频率。关于DFS的具体说明如下：

Controls DFS (Dynamic Frequency Selection).

none - disables DFS.

no-radar-detect - Select channel from scan-list with the lowest number of detected networks. In 'wds-slave' mode this setting has no effect.

radar-detect - Select channel with the lowest number of detected networks and use it if no radar is detected on it for 60 seconds. Otherwise, select different channel. This setting may be required by the country regulations.

This property has effect only in AP mode.

2. 发射功率的选择

发射功率的选择首先看Frequency Mode的设置：

有关该参数的设置，官方说明如下：

Three frequency modes are avai