1.问题描述
在使用freeCAD导入step文件的时候,一开始会导入成一个成体,想隐藏某些部件,却只能隐藏整个装配体,就是图示位置无法展开。
2.解决方法
找到首选项把第5步里面的不打钩就可以了。
3.freeCAD的用处
这个主要的用处还是用来隐藏机械工程师给的装配体,隐藏一些部件,然后用尺子量一下长度。
4.下载安装问题
这个官网上从GitHub上下载的,国内还是不好下载。可以找国内的其他的软件下载园下载,实在搞不定也可以参考淘宝上。让别人帮忙搞一下就好。
在使用freeCAD导入step文件的时候,一开始会导入成一个成体,想隐藏某些部件,却只能隐藏整个装配体,就是图示位置无法展开。
找到首选项把第5步里面的不打钩就可以了。
这个主要的用处还是用来隐藏机械工程师给的装配体,隐藏一些部件,然后用尺子量一下长度。
这个官网上从GitHub上下载的,国内还是不好下载。可以找国内的其他的软件下载园下载,实在搞不定也可以参考淘宝上。让别人帮忙搞一下就好。