EXTI_外部中断线

最新推荐文章于 2024-05-22 20:12:05 发布

cfqq1989

最新推荐文章于 2024-05-22 20:12:05 发布

阅读量126

点赞数

分类专栏：单片机文章标签：单片机 stm32 嵌入式硬件

本文链接：https://blog.csdn.net/cfqq1989/article/details/131666799

版权

单片机专栏收录该内容

16 篇文章 1 订阅

订阅专栏

EXTI_外部中断线

 NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);	//设置NVIC中断分组2:2位抢占优先级，2位响应优先级

//外部中断初始化函数
void EXTIX_Init(void)
{
 
 	  EXTI_InitTypeDef EXTI_InitStructure;
 	  NVIC_InitTypeDef NVIC_InitStructure;

  	RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO,ENABLE);//外部中断，需要使能AFIO时钟

	  KEY_Init();//初始化按键对应io模式

    //GPIOC.5 中断线以及中断初始化配置
  	GPIO_EXTILineConfig(GPIO_PortSourceGPIOC,GPIO_PinSource5);

  	EXTI_InitStructure.EXTI_Line=EXTI_Line5;
  	EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;	
  	EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;//下降沿触发
  	EXTI_InitStructure.EXTI_LineCmd = ENABLE;
  	EXTI_Init(&EXTI_InitStructure);	 	//根据EXTI_InitStruct中指定的参数初始化外设EXTI寄存器

    //GPIOA.15	  中断线以及中断初始化配置
  	GPIO_EXTILineConfig(GPIO_PortSourceGPIOA,GPIO_PinSource15);

  	EXTI_InitStructure.EXTI_Line=EXTI_Line15;
  	EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;	
  	EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
  	EXTI_InitStructure.EXTI_LineCmd = ENABLE;
  	EXTI_Init(&EXTI_InitStructure);	  	//根据EXTI_InitStruct中指定的参数初始化外设EXTI寄存器

    //GPIOA.0	  中断线以及中断初始化配置
  	GPIO_EXTILineConfig(GPIO_PortSourceGPIOA,GPIO_PinSource0);

   	EXTI_InitStructure.EXTI_Line=EXTI_Line0;
  	EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;	
  	EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
  	EXTI_InitStructure.EXTI_LineCmd = ENABLE;
  	EXTI_Init(&EXTI_InitStructure);		//根据EXTI_InitStruct中指定的参数初始化外设EXTI寄存器


 
  	NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn;			//使能按键所在的外部中断通道
  	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x02;	//抢占优先级2 
  	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x02;					//子优先级1
  	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;								//使能外部中断通道
  	NVIC_Init(&NVIC_InitStructure);  	  //根据NVIC_InitStruct中指定的参数初始化外设NVIC寄存器
		
		NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQn;			//使能按键所在的外部中断通道
  	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x02;	//抢占优先级2， 
  	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x01;					//子优先级1
  	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;								//使能外部中断通道
  	NVIC_Init(&NVIC_InitStructure); 
 
 
   	NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn;			//使能按键所在的外部中断通道
  	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x02;	//抢占优先级2， 
  	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x00;					//子优先级1
  	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;								//使能外部中断通道
  	NVIC_Init(&NVIC_InitStructure); 
 
}

 
void EXTI0_IRQHandler(void)
{
  delay_ms(10);    //消抖
	if(WK_UP==1)
	{	  
		LED0=!LED0;
		LED1=!LED1;	
	}
	EXTI_ClearITPendingBit(EXTI_Line0);  //清除EXTI0线路挂起位
}
 void EXTI9_5_IRQHandler(void)
{			
	delay_ms(10);   //消抖			 
	if(KEY0==0)	{
		LED0=!LED0;
	}
 	 EXTI_ClearITPendingBit(EXTI_Line5);    //清除LINE5上的中断标志位  
}


void EXTI15_10_IRQHandler(void)
{
  delay_ms(10);    //消抖			 
  if(KEY1==0)	{
		LED1=!LED1;
	}
	 EXTI_ClearITPendingBit(EXTI_Line15);  //清除LINE15线路挂起位
}