Camera- LIDAR 坐标转换，标定结果 check [ADS]

最新推荐文章于 2023-09-13 09:00:17 发布

chepwavege

最新推荐文章于 2023-09-13 09:00:17 发布

阅读量1k

点赞数

分类专栏： AD

本文链接：https://blog.csdn.net/chepwavege/article/details/94011995

版权

31 篇文章 6 订阅

订阅专栏

FROM baidu Apollo

标定的目的是为了-，统一坐标系，然后传感器融合用

Background Information: In the point cloud projection images, users can see objects and signs with obvious edges and compare the alignment.
Validation Method: If the target is within 50 meters, its edge of point cloud can coincide一致 with the edge of the image, and the accuracy of the calibration results can be proved to be very high. However, if there is a misplacement, the calibration results are in error. The extrinsic parameter is not available when the error is greater than a certain range (for example, 5 pixels, depending on the actual usage).
检查融合后的图片--近距离，比如50m内，lidar得到的物体边缘应该很清晰，和图片的应该吻合，如果错位了，说明没有标定好。
Examples: As shown in the following examples, Figure 4 meets the precision requirements of the extrinsic parameter, and Figure 5 does not.