FI830F PROFIBUS-DP 3BDH000032R1现场总线模块

FI830F abb 3BDH000032R1现场总线模块PROFIBUS-DP F1830F
abb FI830F，现场总线模块，PROFIBUS-DP
abb FI830F与abb PM802F或abb PM803F一起使用。

According to the maintenance requirements, in order to ensure the long-term, stable, efficient and safe operation of the Honeywell DCS system, the maintenance plan of Qingdao Haitian Weiye Automation Control System Co., Ltd. is as follows:

1、 Preparation work
To ensure that the system maintenance can proceed smoothly, Qingdao Haitian Weiye Automation Control System Co., Ltd. dispatched on-site service engineers who have received system training and experience to arrive at the site one day in advance to prepare for parking. Specifically, it includes:
Meet with the person in charge of Party A's maintenance, and conduct safety education and entry permit procedures before maintenance. Check and record the status of each node in the system shutdown, as well as the backup status of the historical module (HM) disk. Check if the drive and drive disk used for backup are intact; Check the model and status of the HM hard drive; Create a virtual disk and initialize it; Use the backup batch command to backup the complete content of the HM hard disk to the virtual disk of the engineer station, and also to the ZIP disk to achieve dual backup; After the backup is completed, compare the content of the HM hard drive to check if the backup content is complete; Label the backup disk and hand it over to the on-site maintenance engineer for safekeeping, and explain to the on-site engineer the path and file name of the backup files made on the GUS hard drive. Carefully prepare for parking and maintenance to ensure that the maintenance can proceed smoothly without any risks.

2、 System shutdown confirmation
On the premise of ensuring that all preparatory work is done properly, maintenance personnel cooperate with on-site engineers to safely cut off the power supply of the system step by step according to the characteristics and requirements of on-site production arrangements and control systems, and make corresponding records.

3、 System dust removal
1. Purpose of dust removal:
After long-term operation, the DCS system may accumulate some dust due to environmental factors such as ventilation, static electricity, temperature, and humidity in the control room. The hazards of dust to the system include the following:
- Causing a system short circuit
Generate static electricity and damage electronic components
- Causing overheating of some card components in the system, causing circuit burnout and chip burnout
Corrosion of circuits and components

2. Dust removal tools:
Brush
Vacuum cleaner
Hair dryer
Cotton cloth
Alcohol
Combination tools
- Anti static bracelet
Golden Finger Cleaning Agent
Circuit board cleaning agent
Instrument air

3. Dust removal environment:
The system dust removal needs to be carried out in the state of power outage at each node of the system.

4. Dust removal steps:
Remove the dust removal object while ensuring there is no static electricity
Preliminary treatment of dust removal objects using a hair dryer or instrument air
Disassemble and remove dust from power supplies and fans with high dust content
Thoroughly remove surface dust with a brush
Clean with circuit board cleaning agent
Clean the gold fingers of the board with a dedicated electronic cleaning agent
Clean the card box with a vacuum cleaner, hair dryer, and cotton cloth
Install the cleaned card into the card box
Dust removal and cleaning of operation stations and cabinets