3.7 list容器
3.7.1 基本概念
- 不同于连续的线性空间
- 节点中维护下一个节点的内存地址
**功能:**将数据进行链式存储
链表(list)是一种物理存储单元上非连续的存储结构,数据元素的逻辑顺序是通过链表中的指针链接实现的
链表的组成:链表由一系列结点组成
结点的组成:一个是存储数据元素的数据域,另一个是存储下一个结点地址的指针域
STL中的链表是一个双向循环链表
- 上图没有体现循环。。。
由于链表的存储方式并不是连续的内存空间,因此链表list中的迭代器只支持前移和后移,属于双向迭代器
list的优点:
- 采用动态存储分配,不会造成内存浪费和溢出
- 链表执行插入和删除操作十分方便,修改指针即可,不需要移动大量元素
list的缺点:
- 链表灵活,但是空间(指针域) 和 时间(遍历)额外耗费较大
List插入操作和删除操作都不会造成原有list迭代器的失效,这在vector是不成立的(因为vector可能扩容,从而改变元素的位置,导致指针失效)
3.7.2 构造函数
功能描述:
- 创建list容器
函数原型:
list<T> lst;
//list采用采用模板类实现,对象的默认构造形式:list(beg,end);
//构造函数将[beg, end)区间中的元素拷贝给本身。list(n,elem);
//构造函数将n个elem拷贝给本身。list(const list &lst);
//拷贝构造函数。
示例:
#include <list>
void printList(const list<int>& L) {
for (list<int>::const_iterator it = L.begin(); it != L.end(); it++) {
cout << *it << " ";
}
cout << endl;
}
void test01()
{
list<int>L1; //默认构造
L1.push_back(10);
L1.push_back(20);
L1.push_back(30);
L1.push_back(40);
printList(L1);
//区间方式构造
list<int>L2(L1.begin(),L1.end());
printList(L2);
//拷贝构造
list<int>L3(L2);
printList(L3);
list<int>L4(10, 1000);
printList(L4);
}
int main() {
test01();
system("pause");
return 0;
}
- 总结:list构造方式同其他STL常用容器
3.7.3 赋值和交换
功能描述:
- 给list容器进行赋值,以及交换list容器
函数原型:
assign(beg, end);
//将[beg, end)区间中的数据拷贝赋值给本身。assign(n, elem);
//将n个elem拷贝赋值给本身。list& operator=(const list &lst);
//重载等号操作符swap(lst);
//将lst与本身的元素互换。
示例:
#include <list>
void printList(const list<int>& L) {
for (list<int>::const_iterator it = L.begin(); it != L.end(); it++) {
cout << *it << " ";
}
cout << endl;
}
//赋值和交换
void test01()
{
list<int>L1;
L1.push_back(10);
L1.push_back(20);
L1.push_back(30);
L1.push_back(40);
printList(L1);
//赋值
list<int>L2;
L2 = L1; //operator= 赋值
printList(L2);
list<int>L3;
L3.assign(L2.begin(), L2.end());
printList(L3);
list<int>L4;
L4.assign(10, 100);
printList(L4);
}
//交换
void test02()
{
list<int>L1;
L1.push_back(10);
L1.push_back(20);
L1.push_back(30);
L1.push_back(40);
list<int>L2;
L2.assign(10, 100);
cout << "交换前: " << endl;
printList(L1);
printList(L2);
cout << endl;
L1.swap(L2);
cout << "交换后: " << endl;
printList(L1);
printList(L2);
}
int main() {
//test01();
test02();
system("pause");
return 0;
}
3.7.4 大小操作
功能描述:
- 对list容器的大小进行操作
函数原型:
-
size();
//返回容器中元素的个数 -
empty();
//判断容器是否为空 -
resize(num);
//重新指定容器的长度为num,若容器变长,则以默认值填充新位置。 //如果容器变短,则末尾超出容器长度的元素被删除。
-
resize(num, elem);
//重新指定容器的长度为num,若容器变长,则以elem值填充新位置。 //如果容器变短,则末尾超出容器长度的元素被删除。
示例:
#include <list>
void printList(const list<int>& L) {
for (list<int>::const_iterator it = L.begin(); it != L.end(); it++) {
cout << *it << " ";
}
cout << endl;
}
//大小操作
void test01()
{
list<int>L1;
L1.push_back(10);
L1.push_back(20);
L1.push_back(30);
L1.push_back(40);
if (L1.empty())
{
cout << "L1为空" << endl;
}
else
{
cout << "L1不为空" << endl;
cout << "L1的大小为: " << L1.size() << endl;
}
//重新指定大小
L1.resize(10);
printList(L1);
L1.resize(2);
printList(L1);
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- 判断是否为空 — empty
- 返回元素个数 — size
- 重新指定个数 — resize
3.7.5 插入和删除
功能描述:
- 对list容器进行数据的插入和删除
函数原型:
- push_back(elem);//在容器尾部加入一个元素
- pop_back();//删除容器中最后一个元素
- push_front(elem);//在容器开头插入一个元素
- pop_front();//从容器开头移除第一个元素
- insert(pos,elem);//在pos位置插elem元素的拷贝,返回新数据的位置。
- insert(pos,n,elem);//在pos位置插入n个elem数据,无返回值。
- insert(pos,beg,end);//在pos位置插入[beg,end)区间的数据,无返回值。
- clear();//移除容器的所有数据
- erase(beg,end);//删除[beg,end)区间的数据,返回下一个数据的位置。
- erase(pos);//删除pos位置的数据,返回下一个数据的位置。
- remove(elem);//删除容器中所有与elem值相等的元素。
示例:
#include <list>
void printList(const list<int>& L) {
for (list<int>::const_iterator it = L.begin(); it != L.end(); it++) {
cout << *it << " ";
}
cout << endl;
}
//插入和删除
void test01()
{
list<int> L;
//尾插
L.push_back(10);
L.push_back(20);
L.push_back(30);
//头插
L.push_front(100);
L.push_front(200);
L.push_front(300);
printList(L);
//尾删
L.pop_back();
printList(L);
//头删
L.pop_front();
printList(L);
//插入
list<int>::iterator it = L.begin();
L.insert(++it, 1000); //第一个位置后插入,不是头插,偏移了一次
printList(L);
//删除
it = L.begin();
L.erase(++it);
printList(L);
//移除
L.push_back(10000);
L.push_back(10000);
L.push_back(10000);
printList(L);
L.remove(10000);
printList(L);
//清空
L.clear();
printList(L);
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- 尾插 — push_back
- 尾删 — pop_back
- 头插 — push_front
- 头删 — pop_front
- 插入 — insert
- 删除 — erase
- 移除 — remove
- 清空 — clear
- 迭代器可移动
3.7.6 数据存取
功能描述:
- 对list容器中数据进行存取
函数原型:
front();
//返回第一个元素。back();
//返回最后一个元素。
示例:
#include <list>
//数据存取
void test01()
{
list<int>L1;
L1.push_back(10);
L1.push_back(20);
L1.push_back(30);
L1.push_back(40);
//cout << L1.at(0) << endl;//错误 不支持at访问数据
//cout << L1[0] << endl; //错误 不支持[]方式访问数据
cout << "第一个元素为: " << L1.front() << endl;
cout << "最后一个元素为: " << L1.back() << endl;
//list容器的迭代器是双向迭代器,不支持随机访问
list<int>::iterator it = L1.begin();
//it = it + 1; 错误,因为不可以跳跃访问,即使是+1,类比始作俑者的逻辑
//但是若干次it++,it--可以
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- list容器中不可以通过[]或者at方式访问数据
- 返回第一个元素 — front
- 返回最后一个元素 — back
- it++:说明可以向后访问,it–同理
- it =it +1不报错,说明支持随机访问,类比始作俑者的逻辑
3.7.7 反转和排序
功能描述:
- 将容器中的元素反转,以及将容器中的数据进行排序
函数原型:
reverse();
//反转链表sort();
//链表排序
示例:
void printList(const list<int>& L) {
for (list<int>::const_iterator it = L.begin(); it != L.end(); it++) {
cout << *it << " ";
}
cout << endl;
}
//降序
bool myCompare(int val1 , int val2)
{
return val1 > val2;
}
//反转和排序
void test01()
{
list<int> L;
L.push_back(90);
L.push_back(30);
L.push_back(20);
L.push_back(70);
printList(L);
//反转容器的元素
L.reverse();
printList(L);
//排序
L.sort(); //默认的排序规则 从小到大
printList(L);
L.sort(myCompare); //指定规则,从大到小
printList(L);
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- 反转 — reverse
- 排序 — sort (成员函数)
3.7.8 排序案例
案例描述:将Person自定义数据类型进行排序,Person中属性有姓名、年龄、身高
排序规则:按照年龄进行升序,如果年龄相同按照身高进行降序
示例:
#include <list>
#include <string>
class Person {
public:
Person(string name, int age , int height) {
m_Name = name;
m_Age = age;
m_Height = height;
}
public:
string m_Name; //姓名
int m_Age; //年龄
int m_Height; //身高
};
//指定排序规则
bool ComparePerson(Person& p1, Person& p2) {
//年龄相同,按身高降序
if (p1.m_Age == p2.m_Age) {
return p1.m_Height > p2.m_Height;
}
else
{ //按年龄升序
return p1.m_Age < p2.m_Age;
}
}
void test01() {
list<Person> L;
Person p1("刘备", 35 , 175);
Person p2("曹操", 45 , 180);
Person p3("孙权", 40 , 170);
Person p4("赵云", 25 , 190);
Person p5("张飞", 35 , 160);
Person p6("关羽", 35 , 200);
L.push_back(p1);
L.push_back(p2);
L.push_back(p3);
L.push_back(p4);
L.push_back(p5);
L.push_back(p6);
for (list<Person>::iterator it = L.begin(); it != L.end(); it++) {
cout << "姓名: " << it->m_Name << " 年龄: " << it->m_Age
<< " 身高: " << it->m_Height << endl;
}
cout << "---------------------------------" << endl;
L.sort(ComparePerson); //排序
for (list<Person>::iterator it = L.begin(); it != L.end(); it++) {
cout << "姓名: " << it->m_Name << " 年龄: " << it->m_Age
<< " 身高: " << it->m_Height << endl;
}
}
int main() {
test01();
system("pause");
return 0;
}
总结:
-
对于自定义数据类型,必须要指定排序规则,否则编译器不知道如何进行排序
-
高级排序只是在排序规则上再进行一次逻辑规则制定,并不复杂
3.8 set/ multiset 容器
3.8.1 基本概念
简介:
- 所有元素都会在插入时自动被排序
本质:
- set/multiset属于关联式容器,底层结构是用二叉树实现。
set和multiset区别:
- set不允许容器中有重复的元素
- multiset允许容器中有重复的元素
3.8.2 构造和赋值
功能描述:创建set容器以及赋值
构造:
set<T> st;
//默认构造函数:set(const set &st);
//拷贝构造函数
赋值:
set& operator=(const set &st);
//重载等号操作符
示例:
#include <set>
void printSet(set<int> & s)
{
for (set<int>::iterator it = s.begin(); it != s.end(); it++)
{
cout << *it << " ";
}
cout << endl;
}
//构造和赋值
void test01()
{
set<int> s1;
//插入数据只有insert方式
s1.insert(10);
s1.insert(30);
s1.insert(20);
s1.insert(40);
printSet(s1);
//拷贝构造
set<int>s2(s1);
printSet(s2);
//赋值
set<int>s3;
s3 = s2;
printSet(s3);
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- set容器插入数据时用insert
- set容器插入数据的数据会自动排序
3.8.3 大小和交换
功能描述:
- 统计set容器大小以及交换set容器
函数原型:
size();
//返回容器中元素的数目empty();
//判断容器是否为空swap(st);
//交换两个容器
示例:
#include <set>
void printSet(set<int> & s)
{
for (set<int>::iterator it = s.begin(); it != s.end(); it++)
{
cout << *it << " ";
}
cout << endl;
}
//大小
void test01()
{
set<int> s1;
s1.insert(10);
s1.insert(30);
s1.insert(20);
s1.insert(40);
if (s1.empty())
{
cout << "s1为空" << endl;
}
else
{
cout << "s1不为空" << endl;
cout << "s1的大小为: " << s1.size() << endl;
}
}
//交换
void test02()
{
set<int> s1;
s1.insert(10);
s1.insert(30);
s1.insert(20);
s1.insert(40);
set<int> s2;
s2.insert(100);
s2.insert(300);
s2.insert(200);
s2.insert(400);
cout << "交换前" << endl;
printSet(s1);
printSet(s2);
cout << endl;
cout << "交换后" << endl;
s1.swap(s2);
printSet(s1);
printSet(s2);
}
int main() {
//test01();
test02();
system("pause");
return 0;
}
总结:
- 统计大小 — size
- 判断是否为空 — empty
- 交换容器 — swap
- 不支持resize方法
3.8.4 插入和删除
功能描述:
- set容器进行插入数据和删除数据
函数原型:
insert(elem);
//在容器中插入元素。clear();
//清除所有元素erase(pos);
//删除pos迭代器所指的元素,返回下一个元素的迭代器。erase(beg, end);
//删除区间[beg,end)的所有元素 ,返回下一个元素的迭代器。erase(elem);
//删除容器中值为elem的元素。
示例:
#include <set>
void printSet(set<int> & s)
{
for (set<int>::iterator it = s.begin(); it != s.end(); it++)
{
cout << *it << " ";
}
cout << endl;
}
//插入和删除
void test01()
{
set<int> s1;
//插入
s1.insert(10);
s1.insert(30);
s1.insert(20);
s1.insert(40);
printSet(s1);
//删除
s1.erase(s1.begin());
printSet(s1);
s1.erase(30);
printSet(s1);
//清空
//s1.erase(s1.begin(), s1.end());
s1.clear();
printSet(s1);
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- 插入 — insert
- 删除 — erase
- 清空 — clear
3.8.5 查找和统计
功能描述:
- 对set容器进行查找数据以及统计数据
函数原型:
find(key);
//查找key是否存在,若存在,返回该键的元素的迭代器;若不存在,返回set.end();count(key);
//统计key的元素个数
示例:
#include <set>
//查找和统计
void test01()
{
set<int> s1;
//插入
s1.insert(10);
s1.insert(30);
s1.insert(20);
s1.insert(40);
//查找
set<int>::iterator pos = s1.find(30);
if (pos != s1.end())
{
cout << "找到了元素 : " << *pos << endl;
}
else
{
cout << "未找到元素" << endl;
}
//统计
int num = s1.count(30);
cout << "num = " << num << endl;
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- 查找 — find (返回的是迭代器)
- 统计 — count (对于set,结果为0或者1)
3.8.6 set和multiset区别
学习目标:
- 掌握set和multiset的区别
区别:
- set不可以插入重复数据,而multiset可以
- set插入数据的同时会返回插入结果,表示插入是否成功
- multiset不会检测数据,因此可以插入重复数据
- 上图为底层,_Pairib为set的insert方法的返回值,从pair的组成可见可通过pair.second = bool来判断是否插入成功
- pair.first返回的是迭代器,即插入的位置
pair<set<int>::iterator, bool> ret = s.insert(10);
if (ret.second) {
cout << "第二次插入成功!" << endl;
}
else {
cout << "第二次插入失败!" << endl;
}
示例:
#include <set>
//set和multiset区别
void test01()
{
set<int> s;
pair<set<int>::iterator, bool> ret = s.insert(10); //插入位置——插入成功否
if (ret.second) {
cout << "第一次插入成功!" << endl;
}
else {
cout << "第一次插入失败!" << endl;
}
ret = s.insert(10);
if (ret.second) {
cout << "第二次插入成功!" << endl;
}
else {
cout << "第二次插入失败!" << endl;
}
//multiset
multiset<int> ms;
ms.insert(10); //返回迭代器,即插入的位置
ms.insert(10);
for (multiset<int>::iterator it = ms.begin(); it != ms.end(); it++) {
cout << *it << " ";
}
cout << endl;
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- 如果不允许插入重复数据可以利用set
- 如果需要插入重复数据利用multiset
3.8.7 pair对组创建
功能描述:
- 成对出现的数据,利用对组可以返回两个数据
两种创建方式:
pair<type, type> p ( value1, value2 );
pair<type, type> p = make_pair( value1, value2 );
示例:
#include <string>
//对组创建
void test01()
{
//不需要头文件
pair<string, int> p(string("Tom"), 20);
cout << "姓名: " << p.first << " 年龄: " << p.second << endl;
pair<string, int> p2 = make_pair("Jerry", 10);
cout << "姓名: " << p2.first << " 年龄: " << p2.second << endl;
}
int main() {
test01();
system("pause");
return 0;
}
3.8.8 set容器排序
学习目标:
- set容器默认排序规则为从小到大,掌握如何改变排序规则
主要技术点:
- 利用仿函数(本质是类),可以改变排序规则
示例一 set存放内置数据类型
#include <set>
class MyCompare
{
public:
bool operator()(int v1, int v2) {
return v1 > v2;
}
};
void test01()
{
set<int> s1;
s1.insert(10);
s1.insert(40);
s1.insert(20);
s1.insert(30);
s1.insert(50);
//默认从小到大
for (set<int>::iterator it = s1.begin(); it != s1.end(); it++) {
cout << *it << " ";
}
cout << endl;
//插入前指定排序规则
set<int,MyCompare> s2;
s2.insert(10);
s2.insert(40);
s2.insert(20);
s2.insert(30);
s2.insert(50);
for (set<int, MyCompare>::iterator it = s2.begin(); it != s2.end(); it++) {
cout << *it << " ";
}
cout << endl;
}
int main() {
test01();
system("pause");
return 0;
}
总结:利用仿函数可以指定set容器的排序规则
示例二 set存放自定义数据类型
#include <set>
#include <string>
class Person
{
public:
Person(string name, int age)
{
this->m_Name = name;
this->m_Age = age;
}
string m_Name;
int m_Age;
};
class comparePerson
{
public:
bool operator()(const Person& p1, const Person &p2)
{
//按照年龄进行排序 降序
return p1.m_Age > p2.m_Age;
}
};
void test01()
{
set<Person, comparePerson> s;
Person p1("刘备", 23);
Person p2("关羽", 27);
Person p3("张飞", 25);
Person p4("赵云", 21);
s.insert(p1);
s.insert(p2);
s.insert(p3);
s.insert(p4);
for (set<Person, comparePerson>::iterator it = s.begin(); it != s.end(); it++)
{
cout << "姓名: " << it->m_Name << " 年龄: " << it->m_Age << endl;
}
}
int main() {
test01();
system("pause");
return 0;
}
- 总结:对于自定义数据类型,set必须指定排序规则才可以插入数据
3.9 map/ multimap容器
3.9.1 map基本概念
简介:
- map中所有元素都是pair
- pair中第一个元素为key(键值),起到索引作用,第二个元素为value(实值)
- 所有元素都会根据元素的键值自动排序
本质:
- map/multimap属于关联式容器,底层结构是用二叉树实现。
优点:
- 可以根据key值快速找到value值
map和multimap区别:
- map不允许容器中有重复key值元素
- multimap允许容器中有重复key值元素
3.9.2 构造和赋值
功能描述:
- 对map容器进行构造和赋值操作
函数原型:
构造:
map<T1, T2> mp;
//map默认构造函数:map(const map &mp);
//拷贝构造函数
赋值:
map& operator=(const map &mp);
//重载等号操作符
示例:
#include <map>
void printMap(map<int,int>&m)
{
for (map<int, int>::iterator it = m.begin(); it != m.end(); it++)
{
cout << "key = " << it->first << " value = " << it->second << endl;
}
cout << endl;
}
void test01()
{
map<int,int>m; //默认构造
m.insert(pair<int, int>(1, 10)); //匿名对组
m.insert(pair<int, int>(2, 20));
m.insert(pair<int, int>(3, 30));
printMap(m);
map<int, int>m2(m); //拷贝构造
printMap(m2);
map<int, int>m3;
m3 = m2; //赋值
printMap(m3);
}
int main() {
test01();
system("pause");
return 0;
}
总结:map中所有元素都是成对出现,插入数据时候要使用对组
3.9.3 大小和交换
功能描述:
- 统计map容器大小以及交换map容器
函数原型:
size();
//返回容器中元素的数目empty();
//判断容器是否为空swap(st);
//交换两个集合容器
示例:
#include <map>
void printMap(map<int,int>&m)
{
for (map<int, int>::iterator it = m.begin(); it != m.end(); it++)
{
cout << "key = " << it->first << " value = " << it->second << endl;
}
cout << endl;
}
void test01()
{
map<int, int>m;
m.insert(pair<int, int>(1, 10));
m.insert(pair<int, int>(2, 20));
m.insert(pair<int, int>(3, 30));
if (m.empty())
{
cout << "m为空" << endl;
}
else
{
cout << "m不为空" << endl;
cout << "m的大小为: " << m.size() << endl;
}
}
//交换
void test02()
{
map<int, int>m;
m.insert(pair<int, int>(1, 10));
m.insert(pair<int, int>(2, 20));
m.insert(pair<int, int>(3, 30));
map<int, int>m2;
m2.insert(pair<int, int>(4, 100));
m2.insert(pair<int, int>(5, 200));
m2.insert(pair<int, int>(6, 300));
cout << "交换前" << endl;
printMap(m);
printMap(m2);
cout << "交换后" << endl;
m.swap(m2);
printMap(m);
printMap(m2);
}
int main() {
test01();
test02();
system("pause");
return 0;
}
总结:
- 统计大小 — size
- 判断是否为空 — empty
- 交换容器 — swap
3.9.4 插入和删除
功能描述:
- map容器进行插入数据和删除数据
函数原型:
insert(elem);
//在容器中插入元素。clear();
//清除所有元素erase(pos);
//删除pos迭代器所指的元素,返回下一个元素的迭代器。erase(beg, end);
//删除区间[beg,end)的所有元素 ,返回下一个元素的迭代器。erase(key);
//删除容器中值为key的元素。
示例:
#include <map>
void printMap(map<int,int>&m)
{
for (map<int, int>::iterator it = m.begin(); it != m.end(); it++)
{
cout << "key = " << it->first << " value = " << it->second << endl;
}
cout << endl;
}
void test01()
{
//插入
map<int, int> m;
//第一种插入方式
m.insert(pair<int, int>(1, 10));
//第二种插入方式
m.insert(make_pair(2, 20));
//第三种插入方式
m.insert(map<int, int>::value_type(3, 30));
//第四种插入方式
m[4] = 40;
printMap(m);
//删除
m.erase(m.begin());
printMap(m);
m.erase(3); //按key删除
printMap(m);
//清空
m.erase(m.begin(),m.end());
m.clear();
printMap(m);
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- map插入方式很多,记住其一即可
- 插入 — insert
- 删除 — erase
- 清空 — clear
- 如上图所示,明明是想查看m[5]的值,但map中没有,此时会自动创建(5,0)的键值对,不符合预期逻辑
3.9.5 查找和统计
功能描述:
- 对map容器进行查找数据以及统计数据
函数原型:
find(key);
//查找key是否存在,若存在,返回该键的元素的迭代器;若不存在,返回set.end();count(key);
//统计key的元素个数
示例:
#include <map>
//查找和统计
void test01()
{
map<int, int>m;
m.insert(pair<int, int>(1, 10));
m.insert(pair<int, int>(2, 20));
m.insert(pair<int, int>(3, 30));
//查找
map<int, int>::iterator pos = m.find(3);
if (pos != m.end())
{
cout << "找到了元素 key = " << (*pos).first << " value = " << (*pos).second << endl;
}
else
{
cout << "未找到元素" << endl;
}
//统计
int num = m.count(3);
cout << "num = " << num << endl;
}
int main() {
test01();
system("pause");
return 0;
}
总结:
-
查找 — find (返回的是迭代器)
-
统计 — count (对于map,结果为0或者1)
-
先进去的对组会让后进去的对组插入不到map中(注意不是覆盖)
3.9.6 map容器排序
学习目标:
- map容器默认排序规则为 按照key值进行 从小到大排序,掌握如何改变排序规则
主要技术点:
- 利用仿函数,可以改变排序规则
示例:
#include <map>
class MyCompare {
public:
bool operator()(int v1, int v2) {
return v1 > v2;
}
};
void test01()
{
//默认从小到大排序
//利用仿函数实现从大到小排序
map<int, int, MyCompare> m;
m.insert(make_pair(1, 10));
m.insert(make_pair(2, 20));
m.insert(make_pair(3, 30));
m.insert(make_pair(4, 40));
m.insert(make_pair(5, 50));
for (map<int, int, MyCompare>::iterator it = m.begin(); it != m.end(); it++) {
cout << "key:" << it->first << " value:" << it->second << endl;
}
}
int main() {
test01();
system("pause");
return 0;
}
总结:
- 利用仿函数可以指定map容器的排序规则
- 对于自定义数据类型,map必须要指定排序规则,同set容器
3.10 案例-员工分组
3.10.1 案例描述
- 公司今天招聘了10个员工(ABCDEFGHIJ),10名员工进入公司之后,需要指派员工在那个部门工作
- 员工信息有: 姓名 工资组成;部门分为:策划、美术、研发
- 随机给10名员工分配部门和工资
- 通过multimap进行信息的插入 key(部门编号) value(员工)
- 分部门显示员工信息
3.10.2 实现步骤
- 创建10名员工,放到vector中
- 遍历vector容器,取出每个员工,进行随机分组
- 分组后,将员工部门编号作为key,具体员工作为value,放入到multimap容器中
- 分部门显示员工信息
案例代码:
#include<iostream>
using namespace std;
#include <vector>
#include <string>
#include <map>
#include <ctime>
/*
- 公司今天招聘了10个员工(ABCDEFGHIJ),10名员工进入公司之后,需要指派员工在那个部门工作
- 员工信息有: 姓名 工资组成;部门分为:策划、美术、研发
- 随机给10名员工分配部门和工资
- 通过multimap进行信息的插入 key(部门编号) value(员工)
- 分部门显示员工信息
*/
#define CEHUA 0
#define MEISHU 1
#define YANFA 2
class Worker
{
public:
string m_Name;
int m_Salary;
};
void createWorker(vector<Worker>&v)
{
string nameSeed = "ABCDEFGHIJ";
for (int i = 0; i < 10; i++)
{
Worker worker;
worker.m_Name = "员工";
worker.m_Name += nameSeed[i];
worker.m_Salary = rand() % 10000 + 10000; // 10000 ~ 19999
//将员工放入到容器中
v.push_back(worker);
}
}
//员工分组
void setGroup(vector<Worker>&v,multimap<int,Worker>&m)
{
for (vector<Worker>::iterator it = v.begin(); it != v.end(); it++)
{
//产生随机部门编号
int deptId = rand() % 3; // 0 1 2
//将员工插入到分组中
//key部门编号,value具体员工
m.insert(make_pair(deptId, *it));
}
}
void showWorkerByGourp(multimap<int,Worker>&m)
{
// 0 A B C 1 D E 2 F G ...
cout << "策划部门:" << endl;
multimap<int,Worker>::iterator pos = m.find(CEHUA);
int count = m.count(CEHUA); // 统计具体人数
int index = 0;
for (; pos != m.end() && index < count; pos++ , index++)
{
cout << "姓名: " << pos->second.m_Name << " 工资: " << pos->second.m_Salary << endl;
}
cout << "----------------------" << endl;
cout << "美术部门: " << endl;
pos = m.find(MEISHU);
count = m.count(MEISHU); // 统计具体人数
index = 0;
for (; pos != m.end() && index < count; pos++, index++)
{
cout << "姓名: " << pos->second.m_Name << " 工资: " << pos->second.m_Salary << endl;
}
cout << "----------------------" << endl;
cout << "研发部门: " << endl;
pos = m.find(YANFA);
count = m.count(YANFA); // 统计具体人数
index = 0;
for (; pos != m.end() && index < count; pos++, index++)
{
cout << "姓名: " << pos->second.m_Name << " 工资: " << pos->second.m_Salary << endl;
}
}
int main() {
srand((unsigned int)time(NULL));
//1、创建员工
vector<Worker>vWorker;
createWorker(vWorker);
//2、员工分组
multimap<int, Worker>mWorker;
setGroup(vWorker, mWorker);
//3、分组显示员工
showWorkerByGourp(mWorker);
测试
//for (vector<Worker>::iterator it = vWorker.begin(); it != vWorker.end(); it++)
//{
// cout << "姓名: " << it->m_Name << " 工资: " << it->m_Salary << endl;
//}
system("pause");
return 0;
}
总结:
- 当数据以键值对形式存在,可以考虑用map 或 multimap