chip2chip axi ip核

一、AXI Chip2Chip operations can be categorized into five modules: AXI4 Interface, AXI4-Lite Interface, Channel Multiplexer, Link Detect FSM, and PHY interface.

其中，Channel Multiplexer，用于决定信号优先级：The Channel Multiplexer also multiplexes AXI, AXI4-Lite and interrupt interfaces over the same set of FPGA I/Os. The priority round-robin multiplexing in the Chip2Chip core assigns the highest priority to interrupt signals, second highest priority to the low-bandwidthAXI4-Lite interface, and last priority to the AXI interface。

Interrupt Signals：At system level, you should ensure that the interrupt level is not changed until it reaches the other end. For example, an interrupt that is set on Slave instance may be unset only when it has reached the master instance. Interrupts may not be transferred properly if they toggle at a faster rate.

二、reset

Use the following steps for reset removal sequence for Chip2Chip cores:
1. Remove the