在Blender导出格式为STL

2019独角兽企业重金招聘Python工程师标准>>>

Blender最新版本已经支持3D打印。只需导出设计文件为stl，即可发送到3D打印机进行打印。

Preparing your mesh

准备Mesh文件。

1. Make sure your mesh is watertight and contains no holes.

   确认Mesh文件是面状而且没有空洞。

2. Check the normals of your designl; they should uniformly point outwards of the design. A quick trick to determine this is to turn off the option 'Double Sided' in the Editing Buttons window. Alternatively, in the same window you can turn on displaying the face normals (under Mesh Tools More). See the screenshot below.