基于VHDL超声波测距实验

共有两个代码文件detect_distance_3和process_4添加到quartus II 9.0 工程文件中,
这两个文件分别对应作业中3和4

按照软件使用流程,编译,仿真添加激励信号,出波形。
chaoshengbo是在quartus II 19.1工具上验证正确

下面是在quartusII 19.1下进行验证

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;

-- Uncomment the following library declaration if using
-- arithmetic functions with Signed or Unsigned values
--use IEEE.NUMERIC_STD.ALL;

-- Uncomment the following library declaration if instantiating
-- any Xilinx leaf cells in this code.
--library UNISIM;
--use UNISIM.VCompon

  • 1
    点赞
  • 2
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
您好!对于基于FPGA的超声波测距模块,以下是一个简单的VHDL代码示例: ```vhdl library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity Ultrasonic_Module is Port ( clk : in STD_LOGIC; -- 时钟信号 trig : in STD_LOGIC; -- 超声波发射触发信号 echo : in STD_LOGIC; -- 超声波接收回波信号 distance : out STD_LOGIC_VECTOR(15 downto 0) -- 测量距离 ); end Ultrasonic_Module; architecture Behavioral of Ultrasonic_Module is signal pulse_width : natural range 0 to 65535 := 0; -- 脉冲宽度 signal counter : natural range 0 to 65535 := 0; -- 计数器 begin process(clk) begin if rising_edge(clk) then -- 发送触发信号 if trig = '1' then pulse_width <= 10; -- 设置脉冲宽度为10个时钟周期 else pulse_width <= 0; end if; -- 接收回波信号并计算距离 if counter = 0 then if echo = '1' then distance <= std_logic_vector(to_unsigned(pulse_width, 16)); -- 将距离值转换为16位的二进制表示 else distance <= (others => '0'); end if; counter <= 10000; -- 设置计数器为10000个时钟周期,用于延迟一段时间再次进行测量 else counter <= counter - 1; end if; end if; end process; end Behavioral; ``` 这段代码实现了一个基于FPGA的超声波测距模块。其基本原理是,通过控制超声波发射和接收信号触发,测量超声波的回波时间来计算距离。在代码中,通过时钟信号clk进行触发和计数,当触发信号trig为高电平时,设置一个脉冲宽度pulse_width,然后等待回波信号echo的上升沿来计算距离。计数器counter用于延迟一段时间再次进行测量。 请注意,这只是一个简单的示例代码,实际应用中可能需要更多的功能和优化。希望对您有所帮助!如有任何问题,请随时提问。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

芯作者

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值