IGCT 3BE039770R0102驱动器单元由闭环8A/25kHz电流源电源供电

IGCT 3BE039770R0102以下是所提供文本中讨论的关键方面：
电气特性：
主电容器（C）充电电压为4.4 kV。
开关的标称工作电流为1850A。
峰值关断电流为3700 A。
使用4500V IGCT 3BHE39770R0102装置，额定连续2800 Vdc。
三个装置串联连接，总直流耐受能力为8400 Vdc。
该开关可以在5600 Vdc下连续可靠地工作。

IGCT 3BE039770R0102驱动器单元：
IGCT 3BE039770R0102驱动器单元由闭环8A/25kHz电流源电源供电。
电源向驱动器单元处的电感耦合的输入变压器供电。
通过倾斜穿过输入变压器的高压电缆实现各个驱动器电平之间的隔离。
提供了IGCT 3BE039770R0102开关组件的电路图，包括电源和触发盒。

保护和监测：
在每个设备级别上，都连接了一个大型RCD缓冲电路，以确保在任何情况下都能关闭3700 a。
开关的触发信号是一个光信号，同时触发所有三个IGCT 3BE039770R0102驱动器单元。
每个驱动器单元都有一个光学状态输出，用于监测触发功能和检测器件故障，如栅极-阴极短缺。

机械设计：
除电源和配电箱外，其他部件均使用玻璃纤维环氧树脂夹紧系统组装在一个堆叠中。
装置上的夹紧力为40kN，由bellville弹簧压力包确保。
器件之间使用镀镍铜块，用作垫片、缓冲器支撑和冷却。
由于2Hz的低脉冲重复率，冷却是通过空气对流实现的。
开关的总重量（不包括配电箱和电源）约为50公斤。
外形尺寸为360 x 625 x 470 mm。

结论
所描述的固态开关是为了在速调管调制器应用中的可靠性和安全性而设计的。IGCT 3BE039770R0102技术、光学触发和稳健的机械设计的集成确保了其适用于欧洲核子研究中心粒子束加速器的连续运行。

The IGCT 3BHE039770R0102-based solid-state switch described in the paper has specific design considerations and features. Here are the key aspects discussed in the provided text:

Electrical Characteristics:

The main capacitor (C) charge voltage is 4.4 kV.
The nominal operating current of the switch is 1850 A.
The peak switch-off current is 3700 A.
4500V IGCT 3BHE039770R0102 devices are used, rated for continuous 2800 Vdc.
Three devices are connected in series for a total DC withstand ability of 8400 Vdc.
The switch can reliably operate at 5600 Vdc continuously.
IGCT 3BHE039770R0102 Driver Units:

IGCT 3BHE039770R0102 driver units are powered by a closed-loop 8A/25kHz current source power supply.
The power supply feeds the input transformers of the inductive coupling at the driver unit.
Isolation between individual driver levels is achieved through the HV cable sloped through the input transformers.
A circuit diagram of the IGCT 3BHE039770R0102 switch assembly, including power supply and trigger box, is provided.
Protection and Monitoring:

Over every device level, a large RCD snubber circuit is connected to ensure that 3700 A can be switched off under all circumstances.
The trigger signal for the switch is an optical signal, simultaneously triggering all three IGCT 3BHE039770R0102 driver units.
Each driver unit has an optical status output for monitoring the trigger function and detecting device failures like gate-cathode shortage.
Mechanical Design:

Components, except the power supply and light distribution box, are assembled in one stack using a glass-fiber epoxy clamping system.
The clamping force on the devices is 40 kN, assured by a bellville spring pressure pack.
Ni-plated copper blocks are used between the devices, serving as spacers, snubber support, and for cooling.
Cooling is achieved by air convection due to the low pulse repetition rate of 2 Hz.
The total weight of the switch (excluding the light distribution box and power supply) is approximately 50 kg.
Overall dimensions are 360 x 625 x 470 mm.
Conclusion:
The described solid-state switch is designed for reliability and safety in a Klystron modulator application. The integration of IGCT 3BHE039770R0102 technology, optical triggering, and a robust mechanical design ensures its suitability for continuous operation in a particle beam accelerator at CERN.