Google Earth Engine ——MOD09A1 V6产品提供了Terra MODIS 1-7带500米分辨率的表面光谱反射率的估计,并对大气条件如气体、气溶胶和瑞利散射进行了校正!

MOD09A1V6产品提供Terra MODIS的500米分辨率表面光谱反射率数据,经过大气条件校正。每个像素值基于观测覆盖率、视角、云况和气溶胶负荷选取。数据集包含7个反射带、一个质量层和观察带,附带详细的品质标志信息,用于评估数据质量。
摘要由CSDN通过智能技术生成

The MOD09A1 V6 product provides an estimate of the surface spectral reflectance of Terra MODIS bands 1-7 at 500m resolution and corrected for atmospheric conditions such as gasses, aerosols, and Rayleigh scattering. Along with the seven reflectance bands is a quality layer and four observation bands. For each pixel, a value is selected from all the acquisitions within the 8-day composite on the basis of high observation coverage, low view angle, the absence of clouds or cloud shadow, and aerosol loading.

Documentation:

MOD09A1 V6产品提供了Terra MODIS 1-7带500米分辨率的表面光谱反射率的估计,并对大气条件如气体、气溶胶和瑞利散射进行了校正。与七个反射带一起的是一个质量层和四个观测带。对于每个像素,根据高观测覆盖率、低视角、无云或云影以及气溶胶负荷,从8天合成的所有采集中选择一个值。

文件。

用户指南

算法理论基础文件(ATBD)

一般文件

Dataset Availability

2000-03-05T00:00:00 - 2021-09-14T00:00:00

Dataset Provider

NASA LP DAAC at the USGS EROS Center

Collection Snippet

ee.ImageCollection("MODIS/006/MOD09A1")

Resolution

500 meters

Bands Table

NameDescriptionMinMaxUnitsWavelengthScale
sur_refl_b01Surface reflectance for band 1-10016000620-670nm0.0001
sur_refl_b02Surface reflectance for band 2-10016000841-876nm0.0001
sur_refl_b03Surface reflectance for band 3-10016000459-479nm0.0001
sur_refl_b04Surface reflectance for band 4-10016000545-565nm0.0001
sur_refl_b05Surface reflectance for band 5-100160001230-1250nm0.0001
sur_refl_b06Surface reflectance for band 6-100160001628-1652nm0.0001
sur_refl_b07Surface reflectance for band 7-100160002105-2155nm0.0001
QASurface reflectance 500m band quality control flags0
QA Bitmask
  • Bits 0-1: MODLAND QA bits
    • 0: Corrected product produced at ideal quality - all bands
    • 1: Corrected product produced at less than ideal quality - some or all bands
    • 2: Corrected product not produced due to cloud effects - all bands
    • 3: Corrected product not produced for other reasons - some or all bands, may be fill value (11) [Note that a value of (11) overrides a value of (01)]
  • Bits 2-5: Band 1 data quality, four bit range
    • 0: Highest quality
    • 7: Noisy detector
    • 8: Dead detector, data interpolated in L1B
    • 9: Solar zenith ≥ 86 degrees
    • 10: Solar zenith ≥ 85 and < 86 degrees
    • 11: Missing input
    • 12: Internal constant used in place of climatological data for at least one atmospheric constant
    • 13: Correction out of bounds, pixel constrained to extreme allowable value
    • 14: L1B data faulty
    • 15: Not processed due to deep ocean or clouds
  • Bits 6-9: Band 2 data quality, four bit range
    • 0: Highest quality
    • 7: Noisy detector
    • 8: Dead detector, data interpolated in L1B
    • 9: Solar zenith ≥ 86 degrees
    • 10: Solar zenith ≥ 85 and < 86 degrees
    • 11: Missing input
    • 12: Internal constant used in place of climatological data for at least one atmospheric constant
    • 13: Correction out of bounds, pixel constrained to extreme allowable value
    • 14: L1B data faulty
    • 15: Not processed due to deep ocean or clouds
  • Bits 10-13: Band 3 data quality, four bit range
    • 0: Highest quality
    • 7: Noisy detector
    • 8: Dead detector, data interpolated in L1B
    • 9: Solar zenith ≥ 86 degrees
    • 10: Solar zenith ≥ 85 and < 86 degrees
    • 11: Missing input
    • 12: Internal constant used in place of climatological data for at least one atmospheric constant
    • 13: Correction out of bounds, pixel constrained to extreme allowable value
    • 14: L1B data faulty
    • 15: Not processed due to deep ocean or clouds
  • Bits 14-17: Band 4 data quality, four bit range
    • 0: Highest quality
    • 7: Noisy detector
    • 8: Dead detector, data interpolated in L1B
    • 9: Solar zenith ≥ 86 degrees
    • 10: Solar zenith ≥ 85 and < 86 degrees
    • 11: Missing input
    • 12: Internal constant used in place of climatological data for at least one atmospheric constant
    • 13: Correction out of bounds, pixel constrained to extreme allowable value
    • 14: L1B data faulty
    • 15: Not processed due to deep ocean or clouds
  • Bits 18-21: Band 5 data quality, four bit range
    • 0: Highest quality
    • 7: Noisy detector
    • 8: Dead detector, data interpolated in L1B
    • 9: Solar zenith ≥ 86 degrees
    • 10: Solar zenith ≥ 85 and < 86 degrees
    • 11: Missing input
    • 12: Internal constant used in place of climatological data for at least one atmospheric constant
    • 13: Correction out of bounds, pixel constrained to extreme allowable value
    • 14: L1B data faulty
    • 15: Not processed due to deep ocean or clouds
  • Bits 22-25: Band 6 data quality, four bit range
    • 0: Highest quality
    • 7: Noisy detector
    • 8: Dead detector, data interpolated in L1B
    • 9: Solar zenith ≥ 86 degrees
    • 10: Solar zenith ≥ 85 and < 86 degrees
    • 11: Missing input
    • 12: Internal constant used in place of climatological data for at least one atmospheric constant
    • 13: Correction out of bounds, pixel constrained to extreme allowable value
    • 14: L1B data faulty
    • 15: Not processed due to deep ocean or clouds
  • Bits 26-29: Band 7 data quality, four bit range
    • 0: Highest quality
    • 7: Noisy detector
    • 8: Dead detector, data interpolated in L1B
    • 9: Solar zenith ≥ 86 degrees
    • 10: Solar zenith ≥ 85 and < 86 degrees
    • 11: Missing input
    • 12: Internal constant used in place of climatological data for at least one atmospheric constant
    • 13: Correction out of bounds, pixel constrained to extreme allowable value
    • 14: L1B data faulty
    • 15: Not processed due to deep ocean or clouds
  • Bit 30: Atmospheric correction performed
    • 0: No
    • 1: Yes
  • Bit 31: Adjacency correction performed
    • 0: No
    • 1: Yes
SolarZenithMODIS Solar zenith angle018000Degrees0.01
ViewZenithMODIS view zenith angle018000Degrees0.01
RelativeAzimuthMODIS relative azimuth angle-1800018000Degrees0.01
StateQASurface reflectance 500m state flags0
StateQA Bitmask
  • Bits 0-1: Cloud state
    • 0: Clear
    • 1: Cloudy
    • 2: Mixed
    • 3: Not set, assumed clear
  • Bit 2: Cloud shadow
    • 0: No
    • 1: Yes
  • Bits 3-5: Land/water flag
    • 0: Shallow ocean
    • 1: Land
    • 2: Ocean coastlines and lake shorelines
    • 3: Shallow inland water
    • 4: Ephemeral water
    • 5: Deep inland water
    • 6: Continental/moderate ocean
    • 7: Deep ocean
  • Bits 6-7: Aerosol quantity
    • 0: Climatology
    • 1: Low
    • 2: Average
    • 3: High
  • Bits 8-9: Cirrus detected
    • 0: None
    • 1: Small
    • 2: Average
    • 3: High
  • Bit 10: Internal cloud algorithm flag
    • 0: No cloud
    • 1: Cloud
  • Bit 11: Internal fire algorithm flag
    • 0: No fire
    • 1: Fire
  • Bit 12: MOD35 snow/ice flag
    • 0: No
    • 1: Yes
  • Bit 13: Pixel is adjacent to cloud
    • 0: No
    • 1: Yes
  • Bit 14: BRDF correction performed data
    • 0: No
    • 1: Yes
  • Bit 15: Internal snow mask
    • 0: No snow
    • 1: Snow
DayOfYearJulian day of the year for the pixel13660

 使用说明:MODIS data and products acquired through the LP DAAC have no restrictions on subsequent use, sale, or redistribution.

数据引用:

LP DAAC - MOD09A1LP DAAC - MOD09A1https://doi.org/10.5067/MODIS/MOD09A1.006

 

  • 1
    点赞
  • 4
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
gee mod09a1是一个去云的过程。在这个过程中,gee代表Google Earth Engine,是一个强大的云计算平台,用于进行地理空间数据的处理和分析。mod09a1则代表了一种遥感数据产品,即用于地表多光谱反射率MODIS(适用于稀疏植被地表的MODIS)的09A1级别产品。 去云是指对遥感数据中的云层进行处理和去除,以获得更清晰和准确的结果。云层在遥感图像中可能会产生遮挡和噪声,对地表特征的识别和分析造成干扰。因此,在处理和使用遥感数据之前,去除云层是一项重要的预处理步骤。 在gee mod09a1去云过程中,可以利用gee平台提供的丰富工具和函数进行云检测和云去除操作。其中包括使用不同的遥感波段和指数进行云检测,如红外波段、NDVI指数等。此外,还可以利用时间序列分析的方法,比较不同时间点的影像数据,以确定云层的存在和变化情况,然后进行云去除操作。 gee mod09a1去云过程不仅有助于获得干净的遥感数据,还可以提高后续地表特征提取、分类和变化检测等分析的准确性和可靠性。这个过程可以简化繁琐的手动处理,减少人为判断的主观性,提高数据处理的效率。 总而言之,gee mod09a1去云是利用Google Earth Engine平台对MODIS遥感数据产品进行处理的过程。通过云检测和云去除操作,可以获得干净的数据,提高地表特征分析的质量。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

此星光明

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值