Vivado IP报[Opt 31-67] 错误问题解决方法

最新推荐文章于 2024-02-22 15:05:49 发布
最新推荐文章于 2024-02-22 15:05:49 发布
阅读量3.3k 收藏 23
点赞数 6
文章标签： fpga开发 Powered by 金山文档
原文链接：https://www.cnblogs.com/jason20/p/13403890.html
版权

使用vivado编译代码时候，出现以下报错

[Opt 31-67] Problem: A LUT2 cell in the design is missing a connection on input pin I0, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was removed due to the trimming of unused logic. The LUT cell name is: Inst_XAUI_10Gbe/U0/xaui_0_core/xaui_inst/transmitter/recoder/txd_out[62]_i_3.

这是因为添加IP核时选择了OOC（Out of context）导致的。

在添加IP时编译时，选择Global即可解决问题。

出现这个问题，找了好久才找到解决方案。

semi874
关注
  • 6
    点赞
  • 踩
  • 23
    收藏
    觉得还不错? 一键收藏
  • 1
    评论
A LUT2 cell in the design is missing a connection on
qq_36567244的博客
03-14 1184
72980 - Vivado - Resolving [Opt 31-67] Problem: A LUT2 cell in the design is missing a connection on 参考Xilinx官方解决方法： Xilinx Customer Community
信捷XL-2AD2PT-A-ED用户随机手册
03-15
模拟量扩展模块 XL-2AD2PT-A-ED 的主要特点： 2 通道模拟量输入：电流输入模式，电流输入有 0～20mA、4～20mA 两种模 式。 2 介绍了关于信捷XL-2AD2PT-A-ED用户随机手册的详细说明，提供无锡信捷的技术资料的下载。
Vivado 报错 [Opt 31-67] Problem: A LUT2cell in the design is missing a connection on input pin I0
热门推荐
hb_wxz的博客
12-12 2万+
问题描述： 工程综合成功完成： 在布线的时候报错 [Opt 31-67] Problem: A LUT2cell in the design is missing a connection on input pin I0. 根据报错信息，我以为错误原因是对于I/O I0没有正确地绑定管脚。但是查看了xdc文件后发现并没有使用I0这个端口。 解决方法： 造成这个错误的原因是：你的某一个模块的一个I...
vivado布线出错opt 31 - 67(opt 31 - 155)
最新发布
aria啵啵啵的博客
02-22 470
我通过功能（有点玄学得味道了）联想到它能到得双向io得位置，然后在代码中发现我送回给双向io得大位宽数据信号有高位部分是没有赋值得（代码中仅对低位数据进行了赋值得，因而一般高位为不确定状态），出于规范性得出发点，我将高位全部置零，然后error就消失了，因此反推应该是高位数据这里将信号阻断了导致布线无法找到数据源。
ZYNQ编译出现 Opt 31-67 A LUT2 cell in the design is missing a connection on input pin I0的问题
louppppp的博客
07-09 1万+
使用VIVADO编译代码时，其中一个IP报错，错误类似为ImplementationOpt Design[Opt 31-67] Problem: A LUT2 cell in the design is missing a connection on input pin I0, which is used by the LUT equation. This pin has either been ...
【XILINX】关于VIVADO报[Opt 31-67] Problem: *cell in the design is missing a connection on input pin的解决方法
sqqwm的专栏
01-18 1029
【XILINX】关于VIVADO报[Opt 31-67] Problem: *cell in the design is missing a connection on input pin的解决方法
Vivado编译报错：[Opt 31-67] Problem: A LUT3 cell in the design is missing a connection on input pin I2
qq_43054364的博客
11-22 2752
Vivado编译报错：[Opt 31-67] Problem: A LUT3 cell in the design is missing a connection on input pin I2
（1）VIVADO报错：采用两片DDR3时，[opt31-67]之MIG ip核，synthesis综合失败
m0_65207454的博客
05-16 962
FPGA例化一个MIG核，控制两片ddr3芯片时（采用两片256M内存的DDR3扩充为512M的内存），综合错误，提示MIG核内部存在没有连接的端口，检查后发现该端口已经连接。采用两片内存256M的DDR3，扩充为内存为512M的DDR3，FPGA例化一个MIG核，控制两片ddr3芯片。提示： mig例化时，最后一步，选择全局综合（Global），例化即可成功。FPGA型号：xc7z020clg-484-1；DDR3型号：MT41K128M16-107；提示：具体啥原因，那位大神知道，还请告诉我一下。
[Opt 31-67] Problem axi_interconnect RTL报错
xiao_yao_ke的博客
09-10 2082
[Opt 31-67] Problem: A LUT2 cell in the design is missing a connection on input pin I0, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was...
Vivado报错：[Opt 31-67] Problem: A LUT6 cell in the design is missing a connection on input pin I5
qq_42025108的博客
05-10 9324
一、报错原文展示 具体报错内容如下： [Opt 31-67] Problem: A LUT6 cell in the design is missing a connection on input pin I5, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was removed due to the trimming of unuse
VIVADO报错：[opt31-67]之MIG ip核综合失败
Akajokers的博客
11-16 3062
mig ip核报错
ug871-vivado-high-level-synthesis-tutorial.pdf
06-12
UG871 - Vivado Design Suite Tutorial: High-Level Synthesis (v2019.1)，UG871文档最新版本，适用于vivado 2017以及之后的版本
arm指令集-中文 （ARM微控制器基础）
10-19
前言...............................................................................................................................................................i 目录...............................................................................................................................................................I ARM7TDMI(-S)指令集及汇编....................................................................................................................1 ARM 处理器寻址方式..........................................................................................................................2 寄存器寻址...................................................................................................................................2 立即寻址.......................................................................................................................................2 寄存器偏移寻址............................................................................................................................2 寄存器间接寻址............................................................................................................................3 基址寻址.......................................................................................................................................3 多寄存器寻址...............................................................................................................................4 堆栈寻址.......................................................................................................................................4 块拷贝寻址...................................................................................................................................5 相对寻址.......................................................................................................................................5 指令集介绍...........................................................................................................................................7 ARM 指令集.................................................................................................................................7 指令格式...............................................................................................................................7 第2 个操作数................................................................................................................7 ＃immed_8r ...........................................................................................................7 Rm..........................................................................................................................8 Rm,shift..................................................................................................................8 条件码............................................................................................................................9 ARM 存储器访问指令........................................................................................................ 11 　 LDR 和STR ........................................................................................................ 11 　 LDM 和STM.......................................................................................................14 　 SWP .....................................................................................................................17 ARM 数据处理指令............................................................................................................19 数据传送指令..............................................................................................................20 　 MOV ............................................................................................................20 　 MVN ............................................................................................................20 算术逻辑运算指令......................................................................................................20 　 ADD.............................................................................................................20 　 SUB..............................................................................................................21 　 RSB..............................................................................................................21 　 ADC .............................................................................................................21 　 SBC..............................................................................................................21 　 RSC..............................................................................................................22 　 AND.............................................................................................................22 　 ORR..............................................................................................................22 　 EOR..............................................................................................................22 比较指令......................................................................................................................23 　 CMP.............................................................................................................23 　 CMN.............................................................................................................23 　 TST...............................................................................................................24 　 TEQ..............................................................................................................24 乘法指令......................................................................................................................25 　 MUL.............................................................................................................25 　 MLA.............................................................................................................25 　 UMULL........................................................................................................25 　 UMLAL........................................................................................................26 　 SMULL........................................................................................................26 　 SMLAL........................................................................................................26 ARM 跳转指令....................................................................................................................27 　 B...........................................................................................................................27 　 BL.........................................................................................................................27 　 BX........................................................................................................................27 ARM 协处理器指令............................................................................................................28 　 CDP......................................................................................................................28 　 LDC......................................................................................................................29 　 STC ......................................................................................................................29 　 MCR.....................................................................................................................30 　 MRC.....................................................................................................................30 ARM 杂项指令....................................................................................................................31 　 SWI ......................................................................................................................31 　 MRS.....................................................................................................................32 　 MSR.....................................................................................................................33 ARM 伪指令........................................................................................................................34 　 ADR.....................................................................................................................35 　 ADRL...................................................................................................................35 　 LDR......................................................................................................................36 　 NOP......................................................................................................................37 Thumb 指令集.............................................................................................................................39 Thumb 指令集与ARM 指令集的区别..............................................................................39 Thumb 存储器访问指令.....................................................................................................40 　 LDR 和STR ........................................................................................................41 　 PUSH 和POP ......................................................................................................43 　 LDMIA 和STMIA ..............................................................................................43 Thumb 数据处理指令.........................................................................................................45 数据传送指令..............................................................................................................46 　 MOV ............................................................................................................46 　 MVN ............................................................................................................46 　 NEG..............................................................................................................47 算术逻辑运算指令......................................................................................................47 　 ADD.............................................................................................................47 　 SUB..............................................................................................................48 　 ADC .............................................................................................................49 　 SBC..............................................................................................................49 　 MUL.............................................................................................................50 　 AND.............................................................................................................50 　 ORR..............................................................................................................50 　 EOR..............................................................................................................51 　 BIC...............................................................................................................51 　 ASR..............................................................................................................51 　 LSL...............................................................................................................52 　 LSR ..............................................................................................................52 　 ROR..............................................................................................................53 比较指令......................................................................................................................53 　 CMP.............................................................................................................53 　 CMN.............................................................................................................54 　 TST...............................................................................................................54 Thumb 跳转指令.........................................................................................................55 　 B...................................................................................................................55 　 BL.................................................................................................................55 　 BX................................................................................................................55 Thumb 杂项指令.........................................................................................................56 　 SWI ..............................................................................................................56 Thumb 伪指令.............................................................................................................57 　 ADR .............................................................................................................57 　 LDR..............................................................................................................57 　 NOP..............................................................................................................58 伪指令.................................................................................................................................................59 符号定义伪指令..........................................................................................................................59 　 GBLA、GBLL、GBLS ..............................................................................................59 　 LCLA、LCLL、LCLS................................................................................................60 　 SETA、SETL、SETS .................................................................................................61 　 RLIST..........................................................................................................................61 　 CN...............................................................................................................................62 　 CP................................................................................................................................62 　 DN、SN.......................................................................................................................62 　 FN................................................................................................................................63 数据定义伪指令..........................................................................................................................63 　 LTORG.........................................................................................................................64 　 MAP............................................................................................................................64 　 FIELD ..........................................................................................................................65 　 SPACE..........................................................................................................................66 　 DCB .............................................................................................................................66 　 DCD 和DCDU............................................................................................................67 　 DCDO ..........................................................................................................................67 DCFD 和DCFDU........................................................................................................68 　 DCFS 和DCFSU.........................................................................................................68 　 DCI..............................................................................................................................69 　 DCQ 和DCQU............................................................................................................69 　 DCW 和DCWU..........................................................................................................70 报告伪指令.................................................................................................................................70 　 ASSERT.......................................................................................................................70 　 INFO ............................................................................................................................71 　 OPT.............................................................................................................................71 　 TTL 和SUBT ..............................................................................................................72 汇编控制伪指令..........................................................................................................................73 　 IF、ELSE 和ENDIF...................................................................................................73 　 MACRO 和MEND .....................................................................................................74 　 WHIL 和WEND .........................................................................................................75 杂项伪指令.................................................................................................................................76 　 ALIGN .........................................................................................................................77 　 AREA...........................................................................................................................78 　 CODE16 和CODE32..................................................................................................79 　 END .............................................................................................................................80 　 ENTRY.........................................................................................................................80 　 EQU .............................................................................................................................81 　 EXPORT 和GLOBAL ................................................................................................81 　 IMPORT 和EXTERN.................................................................................................82 　 GET 和INCLUDE ......................................................................................................83 　 INCBIN........................................................................................................................83 　 KEEP...........................................................................................................................83 　 NOFP ...........................................................................................................................84 　 REQUIRE ....................................................................................................................84 　 PEQUIRE8 和PRESERVE8 .......................................................................................84 　 RN...............................................................................................................................84 　 ROUT...........................................................................................................................85 ARM 伪指令...............................................................................................................................86 　 ADR............................................................................................................................86 　 ADRL...........................................................................................................................86 　 LDR.............................................................................................................................86 　 NOP.............................................................................................................................86 　 LDFD...........................................................................................................................86 　 LDFS...........................................................................................................................87 Thumb 伪指令.............................................................................................................................87 　 ADR............................................................................................................................87 　 LDR.............................................................................................................................87 　 NOP.............................................................................................................................88 ARM 汇编程序设计............................................................................................................................88 文件格式.....................................................................................................................................88 ARM 汇编的一些规范................................................................................................................88 汇编语句格式......................................................................................................................88 标号.....................................................................................................................................89 　 基于PC 的标号...................................................................................................89 　 基于寄存器的标号..............................................................................................90 　 绝对地址..............................................................................................................90 局部标号..............................................................................................................................90 符号.....................................................................................................................................91 常量.....................................................................................................................................91 　 数字常数..............................................................................................................91 　 字符常量..............................................................................................................92 　 布尔常量..............................................................................................................92 段定义.................................................................................................................................92 宏定义及其作用..................................................................................................................93 子程序的调用..............................................................................................................................94 数据比较跳转..............................................................................................................................95 循环.............................................................................................................................................95 数据块复制.................................................................................................................................95 栈操作.........................................................................................................................................96 特殊寄存器定义及应用..............................................................................................................96 散转功能.....................................................................................................................................97 查表操作.....................................................................................................................................97 长跳转.........................................................................................................................................97 对信号量的支持..........................................................................................................................98 伪指令使用.................................................................................................................................98 一个完整的例子..........................................................................................................................98 外围部件控制..............................................................................................................................99 三级流水线介绍..........................................................................................................................99 C 与汇编混合编程............................................................................................................................100 内嵌汇编...................................................................................................................................100 内嵌汇编的指令用法........................................................................................................103 内嵌汇编器与armasm 汇编器的差异.............................................................................104 内嵌汇编注意事项............................................................................................................104 访问全局变量............................................................................................................................106 C 与汇编相互调用....................................................................................................................107 寄存器的使用规则............................................................................................................108 堆栈使用规则....................................................................................................................108 参数传递规则....................................................................................................................109 C 程序调用汇编程序........................................................................................................ 110 汇编程序调用C 程序....................................................................................................... 111 ARM 指令集列表.............................................................................................................................. 113 ARM 存储器访问指令表列表.................................................................................................. 113 ARM 数据处理指令列表.......................................................................................................... 114 ARM 乘法指令列表.................................................................................................................. 115 ARM 跳转指令列表.................................................................................................................. 116 ARM 协处理器指令列表.......................................................................................................... 117 ARM 杂项指令列表.................................................................................................................. 118 ARM 伪指令列表...................................................................................................................... 119 Thumb 指令集列表...........................................................................................................................120 Thumb 存储器访问指令列表...................................................................................................120 Thumb 数据处理指令列表.......................................................................................................121 Thumb 跳转指令及软中断指令列表.......................................................................................122 Thumb 伪指令列表...................................................................................................................123 汇编预定义变量及伪指令................................................................................................................124 预定义的寄存器和协处理器名................................................................................................124 通用寄存器........................................................................................................................124 程序状态寄存器................................................................................................................124 浮点数寄存器....................................................................................................................124 协处理器及协处理器寄存器............................................................................................125 内置变量列表............................................................................................................................125 伪指令列表...............................................................................................................................126 指令条件码列表........................................................................................................................128 CPSR 和SPSR 分配图.............................................................................................................................129
ug902-vivado-high-level-synthesis（中文）.pdf
08-09
ug902-vivado-high-level-synthesis（中文）、HLS学习必备开发文档
ug995-vivado-ip-subsystems-tutorial.pdf
04-23
Vivado Design Suite Tutorial Designing IP Subsystems Using IP Integrator Vivado Design Suite UG995 (v2022.2) October 19, 2022
cpuminer-opt-cpupower:准备去采矿YENTEN
03-25
cpuminer-opt-cpupower 准备去采矿YENTEN 设置 $ docker build -t cpuminer-opt-cpupower https://github.com/baldy-cape/cpuminer-opt-cpupower.git $ docker run -d -h$HOSTNAME --restart always --name mining cpuminer-opt-cpupower $ docker logs mining 工人姓名 以系统主机名命名工作程序 $ docker run -d -h$HOSTNAME --name mining cpuminer-opt-cpupower
ug896-vivado-ip ug896-vivado-ip
11-02
ug896-vivado-ip
ug1118-vivado-creating-packaging-custom-ip.pdf
05-19
ug1118-vivado-creating-packaging-custom-ip.pdf，官方文档
ug902-vivado-high-level-synthesis.pdf
06-12
UG902 - Vivado Design Suite User Guide: High-Level Synthesis (v2019.1), UG902最新版本
vivado ip核 mipi d-phy 测试
09-07
Vivado IP核是Xilinx公司开发的一种可配置的IP核生成工具，可以用于快速生成各种功能的IP核。其中，MIPI D-PHY是一种用于手机、摄像头、显示器等设备的高速串行接口协议。 MIPI D-PHY测试可以通过使用Vivado IP核生成MIPI D-PHY核，并在FPGA平台上进行测试来完成。首先，我们需要在Vivado中创建一个新的项目，选择适当的FPGA型号和开发板。然后，通过Vivado IP核生成我们所需要的MIPI D-PHY核，并将其添加到我们的项目中。 在项目中添加MIPI D-PHY IP核后，我们可以对其进行配置，并将其连接到其他逻辑电路或外部设备。配置参数包括数据通道的位宽、时钟频率、电源电压等。我们还可以配置其他相关的设置，如时钟延迟、电源方案等。 完成配置后，我们可以执行仿真来验证MIPI D-PHY的功能。可以通过发送和接收模拟数据来模拟实际的通信过程，并检查传输的正确性和稳定性。仿真结果应该与预期的规格要求相符。 完成仿真后，可以通过将设计生成比特流文件并下载到FPGA平台上来进行硬件验证。在FPGA上运行实际的测试数据，观察MIPI D-PHY的性能指标，例如误码率、数据传输速率等。这些指标应该与设计规格及MIPI D-PHY协议相符。 总结来说，通过使用Vivado IP核生成MIPI D-PHY核，并在FPGA平台上进行测试，我们可以验证MIPI D-PHY核的功能和性能，确保其正常工作并符合规格要求。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值