UFC760BE42 3BHE004573R0042是一种能将被测交流电压转换成按线性比例输出的直流电流或电压的仪器。配以相应的指示仪表或装置,可在电力系统交流电路中实现对电流的测量和控制。主要应用于发电厂、水电站等应用场合。
UFC760BE42 3BHE004573R0042的主要技术参数
引用标准: GB/T 13850-1998(IEC688-1992)
准确度等级: 0.2%F·S
长期稳定度: ≤±0.2%/年,无累计误差
温度影响: ≤100ppm/℃
响应时间:<400ms
输出纹波:<0.4% (峰-峰值)
输入功耗:电流<0.2VA,电压<0.1VA
工作频率:标称频率 ±10%
输出负载:电流输出 额定10V压降 最大15V压降(可选)
电压输出 额定2mA 最大5mA输出
输出负载影响:<0.1%
辅助电源:额定电压 80%-120% 额定频率 90%-110%
允许过量输入:电流 3倍连续 10倍30秒 50倍1秒
电压最大2倍连续
电压试验:输入/输出/电源/外壳之间 2kV AC 1min IEC866
冲击试验: ANSI C37.90a/1973,IEC 255-4
(5kV 1.2/50us脉冲电压)
校正幅度: 满度最新±3%,零点最小±1%
磁场影响: 0.4KA/m 磁场强度变化<0.05%
工作条件:温度﹣10~55℃相对湿度 ≤95% 无凝露
贮藏条件:温度﹣40~70℃相对湿度 ≤95% 无凝露
Discover engineering productivity when designing your automation solutions Automation Builder is ABB's integrated programming, simulation, commissioning and maintenance environment for PLCs, safety, drives, motion, control panels and SCADA. Automation Builder combines the proven ABB tools Drive Manager, Drive composer pro, Mint WorkBench, Panel Builder and ABB zenon.
Always get the right scope of Automation Builder for your automation solutions One single software installer helps you to create and maintain your personal Automation Builder configuration - either on your PC or on a server. Any changes or updates are just a matter of a few mouse clicks. The Automation Builder licensing system is designed for supporting most operation scenarios. Licenses can be installed on PCs, USB dongles or license servers. In case of changes in the organization or in the engineering workflows the licenses can easily be transferred to where you need them. Next level engineering efficiency Improve your engineering efficiency by maximizing data re-use. Data that is available from third party tools can be imported or synchronized, either via dedicated interfaces or generic Excel sheets. Configurations that have been created for the PLC can automatically be re-used e.g. for the configuration of drives or operator panels. Engineering efforts can be reduced further by using easy-to-use libraries e.g. for wind, water, solar, drives, motion, robotics, safety and building automation applications. And in case building blocks are missing for your automation solution simply create them yourself. Project scripting allows you to automate the creation of any party of your configuration or application.