怎么样递增的注册成对的点云

这次我们将使用Iterative Closest Point algorithm来递增的注册一系列的点云。

这个主意来自于把所有的点云转换成第一个点云的框架，通过找到每个连续点云间最好的装换，并且计算整个点云的转换。

你的数据集应该由重新排列的，在一个相同的框架里面重叠的点云构成。

/*
 * Software License Agreement (BSD License)
 *
 *  Copyright (c) 2010, Willow Garage, Inc.
 *  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials provided
 *     with the distribution.
 *   * Neither the name of Willow Garage, Inc. nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 *  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 *  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 *  ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 *
 * $Id$
 *
 */

/* \author Radu Bogdan Rusu
 * adaptation Raphael Favier*/

#include <boost/make_shared.hpp>
#include <pcl/point_types.h>
#include <pcl/point_cloud.h>
#include <pcl/point_representation.h>

#include <pcl/io/pcd_io.h>

#include <pcl/filters/voxel_grid.h>
#include <pcl/filters/filter.h>

#include <pcl/features/normal_3d.h>

#include <pcl/registration/icp.h>
#include <pcl/registration/icp_nl.h>
#include <pcl/registration/transforms.h>

#include <pcl/visualization/pcl_visualizer.h>

using pcl::visualization::PointCloudColorHandlerGenericField;
using pcl::visualization::PointCloudColorHandlerCustom;

//convenient typedefs
typedef pcl::PointXYZ PointT;
typedef pcl::PointCloud<PointT> PointCloud;
typedef pcl::PointNormal PointNormalT;
typedef pcl::PointCloud<PointNormalT> PointCloudWithNormals;

// This is a tutorial so we can afford having global variables 
	//our visualizer
	pcl::visualization::PCLVisualizer *p;
	//its left and right viewports
	int vp_1, vp_2;

//convenient structure to handle our pointclouds
struct PCD
{
  PointCloud::Ptr cloud;
  std::string f_name;

  PCD() : cloud (new PointCloud) {};
};

struct PCDComparator
{
  bool operator () (const PCD& p1, const PCD& p2)
  {
    return (p1.f_name < p2.f_name);
  }
};


// Define a new point representation for < x, y, z, curvature >
class MyPointRepresentation : public pcl::PointRepresentation <PointNormalT>
{
  using pcl::PointRepresentation<PointNormalT>::nr_dimensions_;
public:
  MyPointRepresentation ()
  {
    // Define the number of dimensions
    nr_dimensions_ = 4;
  }

  // Override the copyToFloatArray method to define our feature vector
  virtual void copyToFloatArray (const PointNormalT &p, float * out) const
  {
    // < x, y, z, curvature >
    out[0] = p.x;
    out[1] = p.y;
    out[2] = p.z;
    out[3] = p.curvature;
  }
};



/** \brief Display source and target on the first viewport of the visualizer
 *
 */
void showCloudsLeft(const PointCloud::Ptr cloud_target, const PointCloud::Ptr cloud_source)
{
  p->removePointCloud ("vp1_target");
  p->removePointCloud ("vp1_source");

  PointCloudColorHandlerCustom<PointT> tgt_h (cloud_target, 0, 255, 0);
  PointCloudColorHandlerCustom<PointT> src_h (cloud_source, 255, 0, 0);
  p->addPointCloud (cloud_target, tgt_h, "vp1_target", vp_1);
  p->addPointCloud (cloud_source, src_h, "vp1_source", vp_1);

  PCL_INFO ("Press q to begin the registration.\n");
  p-> spin();
}



/** \brief Display source and target on the second viewport of the visualizer
 *
 */
void showCloudsRight(const PointCloudWithNormals::Ptr cloud_target, const PointCloudWithNormals::Ptr cloud_source)
{
  p->removePointCloud ("source");
  p->removePointCloud ("target");


  PointCloudColorHandlerGenericField<PointNormalT> tgt_color_handler (cloud_target, "curvature");
  if (!tgt_color_handler.isCapable ())
      PCL_WARN ("Cannot create curvature color handler!");

  PointCloudColorHandlerGenericField<PointNormalT> src_color_handler (cloud_source, "curvature");
  if (!src_color_handler.isCapable ())
      PCL_WARN ("Cannot create curvature color handler!");


  p->addPointCloud (cloud_target, tgt_color_handler, "target", vp_2);
  p->addPointCloud (cloud_source, src_color_handler, "source", vp_2);

  p->spinOnce();
}


/** \brief Load a set of PCD files that we want to register together
  * \param argc the number of arguments (pass from main ())
  * \param argv the actual command line arguments (pass from main ())
  * \param models the resultant vector of point cloud datasets
  */
void loadData (int argc, char **argv, std::vector<PCD, Eigen::aligned_allocator<PCD> > &models)
{
  std::string extension (".pcd");
  // Suppose the first argument is the actual test model
  for (int i = 1; i < argc; i++)
  {
    std::string fname = std::string (argv[i]);
    // Needs to be at least 5: .plot
    if (fname.size () <= extension.size ())
      continue;

    std::transform (fname.begin (), fname.end (), fname.begin (), (int(*)(int))tolower);

    //check that the argument is a pcd file
    if (fname.compare (fname.size () - extension.size (), extension.size (), extension) == 0)
    {
      // Load the cloud and saves it into the global list of models
      PCD m;
      m.f_name = argv[i];
      pcl::io::loadPCDFile (argv[i], *m.cloud);
      //remove NAN points from the cloud
      std::vector<int> indices;
      pcl::removeNaNFromPointCloud(*m.cloud,*m.cloud, indices);

      models.push_back (m);
    }
  }
}



/** \brief Align a pair of PointCloud datasets and return the result
  * \param cloud_src the source PointCloud
  * \param cloud_tgt the target PointCloud
  * \param output the resultant aligned source PointCloud
  * \param final_transform the resultant transform between source and target
  */
void pairAlign (const PointCloud::Ptr cloud_src, const PointCloud::Ptr cloud_tgt, PointCloud::Ptr output, Eigen::Matrix4f &final_transform, bool downsample = false)
{
  //
  // Downsample for consistency and speed
  // \note enable this for large datasets
  PointCloud::Ptr src (new PointCloud);
  PointCloud::Ptr tgt (new PointCloud);
  pcl::VoxelGrid<PointT> grid;
  if (downsample)
  {
    grid.setLeafSize (0.05, 0.05, 0.05);
    grid.setInputCloud (cloud_src);
    grid.filter (*src);

    grid.setInputCloud (cloud_tgt);
    grid.filter (*tgt);
  }
  else
  {
    src = cloud_src;
    tgt = cloud_tgt;
  }


  // Compute surface normals and curvature
  PointCloudWithNormals::Ptr points_with_normals_src (new PointCloudWithNormals);
  PointCloudWithNormals::Ptr points_with_normals_tgt (new PointCloudWithNormals);

  pcl::NormalEstimation<PointT, PointNormalT> norm_est;
  pcl::search::KdTree<pcl::PointXYZ>::Ptr tree (new pcl::search::KdTree<pcl::PointXYZ> ());
  norm_est.setSearchMethod (tree);
  norm_est.setKSearch (30);
  
  norm_est.setInputCloud (src);
  norm_est.compute (*points_with_normals_src);
  pcl::copyPointCloud (*src, *points_with_normals_src);

  norm_est.setInputCloud (tgt);
  norm_est.compute (*points_with_normals_tgt);
  pcl::copyPointCloud (*tgt, *points_with_normals_tgt);

  //
  // Instantiate our custom point representation (defined above) ...
  MyPointRepresentation point_representation;
  // ... and weight the 'curvature' dimension so that it is balanced against x, y, and z
  float alpha[4] = {1.0, 1.0, 1.0, 1.0};
  point_representation.setRescaleValues (alpha);

  //
  // Align
  pcl::IterativeClosestPointNonLinear<PointNormalT, PointNormalT> reg;
  reg.setTransformationEpsilon (1e-6);
  // Set the maximum distance between two correspondences (src<->tgt) to 10cm
  // Note: adjust this based on the size of your datasets
  reg.setMaxCorrespondenceDistance (0.1);  
  // Set the point representation
  reg.setPointRepresentation (boost::make_shared<const MyPointRepresentation> (point_representation));

  reg.setInputSource (points_with_normals_src);
  reg.setInputTarget (points_with_normals_tgt);



  //
  // Run the same optimization in a loop and visualize the results
  Eigen::Matrix4f Ti = Eigen::Matrix4f::Identity (), prev, targetToSource;
  PointCloudWithNormals::Ptr reg_result = points_with_normals_src;
  reg.setMaximumIterations (2);
  for (int i = 0; i < 30; ++i)
  {
    PCL_INFO ("Iteration Nr. %d.\n", i);

    // save cloud for visualization purpose
    points_with_normals_src = reg_result;

    // Estimate
    reg.setInputSource (points_with_normals_src);
    reg.align (*reg_result);

		//accumulate transformation between each Iteration
    Ti = reg.getFinalTransformation () * Ti;

		//if the difference between this transformation and the previous one
		//is smaller than the threshold, refine the process by reducing
		//the maximal correspondence distance
    if (fabs ((reg.getLastIncrementalTransformation () - prev).sum ()) < reg.getTransformationEpsilon ())
      reg.setMaxCorrespondenceDistance (reg.getMaxCorrespondenceDistance () - 0.001);
    
    prev = reg.getLastIncrementalTransformation ();

    // visualize current state
    showCloudsRight(points_with_normals_tgt, points_with_normals_src);
  }

	//
  // Get the transformation from target to source
  targetToSource = Ti.inverse();

  //
  // Transform target back in source frame
  pcl::transformPointCloud (*cloud_tgt, *output, targetToSource);

  p->removePointCloud ("source");
  p->removePointCloud ("target");

  PointCloudColorHandlerCustom<PointT> cloud_tgt_h (output, 0, 255, 0);
  PointCloudColorHandlerCustom<PointT> cloud_src_h (cloud_src, 255, 0, 0);
  p->addPointCloud (output, cloud_tgt_h, "target", vp_2);
  p->addPointCloud (cloud_src, cloud_src_h, "source", vp_2);

	PCL_INFO ("Press q to continue the registration.\n");
  p->spin ();

  p->removePointCloud ("source"); 
  p->removePointCloud ("target");

  //add the source to the transformed target
  *output += *cloud_src;
  
  final_transform = targetToSource;
 }


/* ---[ */
int main (int argc, char** argv)
{
  // Load data
  std::vector<PCD, Eigen::aligned_allocator<PCD> > data;
  loadData (argc, argv, data);

  // Check user input
  if (data.empty ())
  {
    PCL_ERROR ("Syntax is: %s <source.pcd> <target.pcd> [*]", argv[0]);
    PCL_ERROR ("[*] - multiple files can be added. The registration results of (i, i+1) will be registered against (i+2), etc");
    return (-1);
  }
  PCL_INFO ("Loaded %d datasets.", (int)data.size ());
  
  // Create a PCLVisualizer object
  p = new pcl::visualization::PCLVisualizer (argc, argv, "Pairwise Incremental Registration example");
  p->createViewPort (0.0, 0, 0.5, 1.0, vp_1);
  p->createViewPort (0.5, 0, 1.0, 1.0, vp_2);

	PointCloud::Ptr result (new PointCloud), source, target;
  Eigen::Matrix4f GlobalTransform = Eigen::Matrix4f::Identity (), pairTransform;
  
  for (size_t i = 1; i < data.size (); ++i)
  {
    source = data[i-1].cloud;
    target = data[i].cloud;

    // Add visualization data
    showCloudsLeft(source, target);

    PointCloud::Ptr temp (new PointCloud);
    PCL_INFO ("Aligning %s (%d) with %s (%d).\n", data[i-1].f_name.c_str (), source->points.size (), data[i].f_name.c_str (), target->points.size ());
    pairAlign (source, target, temp, pairTransform, true);

    //transform current pair into the global transform
    pcl::transformPointCloud (*temp, *result, GlobalTransform);

    //update the global transform
    GlobalTransform = GlobalTransform * pairTransform;

		//save aligned pair, transformed into the first cloud's frame
    std::stringstream ss;
    ss << i << ".pcd";
    pcl::io::savePCDFile (ss.str (), *result, true);

  }
}
/* ]--- */

我们这次直接看看核心函数的功能

主函数检查用户输入，加载数据通过矢量的形式并且开启了一个匹配注册的过程，在找到一对点云的转换后，这一对点云将转换到第一个点云的框架。全局的转换就会被更新。

int main (int argc, char** argv)
{
  // Load data
  std::vector<PCD, Eigen::aligned_allocator<PCD> > data;
  loadData (argc, argv, data);

  // Check user input
  if (data.empty ())
  {
    PCL_ERROR ("Syntax is: %s <source.pcd> <target.pcd> [*]", argv[0]);
    PCL_ERROR ("[*] - multiple files can be added. The registration results of (i, i+1) will be registered against (i+2), etc");
    return (-1);
  }
  PCL_INFO ("Loaded %d datasets.", (int)data.size ());
  
  // Create a PCLVisualizer object
  p = new pcl::visualization::PCLVisualizer (argc, argv, "Pairwise Incremental Registration example");
  p->createViewPort (0.0, 0, 0.5, 1.0, vp_1);
  p->createViewPort (0.5, 0, 1.0, 1.0, vp_2);

	PointCloud::Ptr result (new PointCloud), source, target;
  Eigen::Matrix4f GlobalTransform = Eigen::Matrix4f::Identity (), pairTransform;
  
  for (size_t i = 1; i < data.size (); ++i)
  {
    source = data[i-1].cloud;
    target = data[i].cloud;

    // Add visualization data
    showCloudsLeft(source, target);

    PointCloud::Ptr temp (new PointCloud);
    PCL_INFO ("Aligning %s (%d) with %s (%d).\n", data[i-1].f_name.c_str (), source->points.size (), data[i].f_name.c_str (), target->points.size ());
    pairAlign (source, target, temp, pairTransform, true);

    //transform current pair into the global transform
    pcl::transformPointCloud (*temp, *result, GlobalTransform);

    //update the global transform
    GlobalTransform = GlobalTransform * pairTransform;

		//save aligned pair, transformed into the first cloud's frame
    std::stringstream ss;
    ss << i << ".pcd";
    pcl::io::savePCDFile (ss.str (), *result, true);

  }
}
/* ]--- */

加载数据是很简单的。我们迭代了每个程序的参数。

对于每一个参数，我们检测是否它链接到一个pcd文件。如果是，我们就创造一个PCD对象来添加点云向量。

void loadData (int argc, char **argv, std::vector<PCD, Eigen::aligned_allocator<PCD> > &models)
{
  std::string extension (".pcd");
  // Suppose the first argument is the actual test model
  for (int i = 1; i < argc; i++)
  {
    std::string fname = std::string (argv[i]);
    // Needs to be at least 5: .plot
    if (fname.size () <= extension.size ())
      continue;

    std::transform (fname.begin (), fname.end (), fname.begin (), (int(*)(int))tolower);

    //check that the argument is a pcd file
    if (fname.compare (fname.size () - extension.size (), extension.size (), extension) == 0)
    {
      // Load the cloud and saves it into the global list of models
      PCD m;
      m.f_name = argv[i];
      pcl::io::loadPCDFile (argv[i], *m.cloud);
      //remove NAN points from the cloud
      std::vector<int> indices;
      pcl::removeNaNFromPointCloud(*m.cloud,*m.cloud, indices);

      models.push_back (m);
    }
  }
}

我们现在实际已经到了点的注册

void pairAlign (const PointCloud::Ptr cloud_src, const PointCloud::Ptr cloud_tgt, PointCloud::Ptr output, Eigen::Matrix4f &final_transform, bool downsample = false)

接下去我们进行对点云的降低采样，然后创建ICP这个对象。

一旦最好的转换找到了，我们将把它进行反转并把它放到目标点云里面。

//
// Get the transformation from target to source
targetToSource = Ti.inverse();

//
// Transform target back in source frame
pcl::transformPointCloud (*cloud_tgt, *output, targetToSource);
[...]
*output += *cloud_tgt;
final_transform = targetToSource;

 

运行

/pairwise_incremental_registration capture000[1-5].pcd

 

结果

运行最终结果

pcl_viewer 1.pcd 2.pcd 3.pcd 4.pcd