Countbcd_hdlbits

module bcdcount(input clk,
                input reset,
                input ena,
                //output reg cout,
                output reg [3:0] q);
    //reg cout;
    //reg [3:0] q;
    always @(posedge clk)
        begin
            if (reset == 1)
                q <= 4'b0;
            else if (ena == 1)
                 begin
                     if (q == 4'h9)
                         begin
                             q<=4'b0;
                             //cout <=1'b1;
                         end
                     else
                         q <= q+1;  
                 end
        end
endmodule



module top_module (
    input clk,
    input reset,   // Synchronous active-high reset
    output [3:1] ena,
    output [15:0] q);
	
    reg [3:0] q1,q2,q3,q4;
    
    bcdcount bcdcount1 (.clk(clk),
                        .reset(reset),
                        .ena(1'b1),
                        .q(q1));
                        
    bcdcount bcdcount2 (.clk(clk),
                        .reset(reset),
                        .ena(q1==4'h9),
                        .q(q2));
    bcdcount bcdcount3 (.clk(clk),
                        .reset(reset),
                        .ena(q2==4'h9  && q1==4'h9) ,
                        .q(q3));
    bcdcount bcdcount4 (.clk(clk),
                        .reset(reset),
                        .ena(q3==4'h9 &&q2==4'h9  && q1==4'h9) ,
                        .q(q4));
    
    assign ena = {q3==4'h9 &&q2==4'h9  && q1==4'h9,q2==4'h9  && q1==4'h9, q1==4'h9};
    
    assign q = {q4,q3,q2,q1};
    
endmodule