Verilog学习之7568：The 7458 is a chip with four AND gates and two OR gates.

The 7458 is a chip with four AND gates and two OR gates. This problem is slightly more complex than 7420.

Create a module with the same functionality as the 7458 chip. It has 10 inputs and 2 outputs. You may choose to use an assign statement to drive each of the output wires, or you may choose to declare (four) wires for use as intermediate signals, where each internal wire is driven by the output of one of the AND gates. For extra practice, try it both ways.

创建一个与 7458 芯片功能相同的模块。它有 10 个输入和 2 个输出。您可以选择使用分配语句来驱动每条输出线，或者您可以选择声明（四）条线用作中间信号，其中每条内部线由一个与门的输出驱动。如需额外练习，请尝试两种方式。

 

Module Declaration

module top_module ( 
    input p1a, p1b, p1c, p1d, p1e, p1f,
    output p1y,
    input p2a, p2b, p2c, p2d,
    output p2y );

You need to drive two signals (p1y and p2y) with a value.

module top_module ( 
    input p1a, p1b, p1c, p1d, p1e, p1f,
    output p1y,
    input p2a, p2b, p2c, p2d,
    output p2y );
    assign p1y = (p1a & p1b & p1c) | (p1d & p1e & p1f);
    assign p2y = (p2a & p2b) | (p2d & p2c);


endmodule