💥💥💞💞欢迎来到本博客❤️❤️💥💥
🏆博主优势:🌞🌞🌞博客内容尽量做到思维缜密,逻辑清晰,为了方便读者。
⛳️座右铭:行百里者,半于九十。
📋📋📋本文目录如下:🎁🎁🎁
目录
💥1 概述
自适应噪声消除环境中模拟了FXRLS-NKP-TF算法
噪声消除是数字信号处理中的一个重要问题,尤其在通信系统和语音处理领域中。自适应滤波是一种有效的方法来减少噪声对信号的影响。FXRLS-NKP-TF算法是一种自适应滤波算法,结合了最小均方误差准则和快速递归最小二乘算法,能够有效地提高滤波性能。
在噪声环境下,传统的自适应滤波算法可能会受到噪声干扰的影响,导致滤波效果不佳。为了解决这一问题,可以引入FXRLS-NKP-TF算法,该算法能够自适应地调整滤波器的系数,以适应不同的噪声环境,从而提高滤波性能。
通过对FXRLS-NKP-TF算法在噪声环境中的模拟研究,可以评估其在实际应用中的性能表现,并进一步优化算法参数,以提高噪声消除效果。研究结果可以为噪声消除领域的进一步发展提供重要参考,推动自适应滤波技术在实际应用中的广泛应用。
📚2 运行结果
部分代码:
% path's length
M_p = 1024; % taps primary path
M = 512; % taps fixed secondary paths
N = 1024; % taps adaptive
Sw = Sz(1:M)/norm(Sz(1:M)); % Length of the Secondary path
Pw = Pz/norm(Pz); % Length of the Primary path
%% experimental set up
itn = 30000; %500000 % number of iterations per experiment 500k
runs = 1;%5 % number of experiments
average = 100; % frame size for MSE
%% OFFLINE MODELING
x_iden = randn(1,itn); % generate white noise in order to estimate S(z)
% send it to the actuator and measure it at the sensor position
y_iden = filter(Sw, 1, x_iden); % filter random noise through the secondary path
% start the identification process or the so called offline process
Shx = zeros(1,M); % the state of Sh(z)
Shw = zeros(1,M); % the weight of Sh(z)
e_iden = zeros(1,itn); % data buffer for the identification error
% and apply least mean square algorithm= X(1,:);= X(1,:);
mu = 0.001; % step size
for i=1:itn % discrete time k
Shx = [x_iden(i) Shx(1:M-1)]; % update the state (Retarded signal)
Shy = sum(Shx.*Shw); % calculate output of Sh(z)
e_iden(i) = y_iden(i)-Shy; % calculate error
Shw = Shw+mu*e_iden(i)*Shx; % adjust the weight
end
%% Online experimental set up
%% variables used in all of the proposed algorithms
L1 = 64;
🎉3 参考文献
文章中一些内容引自网络,会注明出处或引用为参考文献,难免有未尽之处,如有不妥,请随时联系删除。
[1]刘兴亮.混响环境麦克风阵列语音噪声消除算法研究[D].福州大学,2017.
[1]金彦丰,余毅.一种基于小波包分解FXRLS算法的自适应噪声抵消方法[J].舰船电子工程, 2012, 32(10):3.DOI:10.3969/j.issn.1627-9730.2012.10.047.