Jetson-TX2安装opencv教程

版权声明：本文为博主原创文章，未经博主允许不得转载。https://blog.csdn.net/w5688414/article/details/78771958

有时候我们需要用到opencv3.0,通过下面apt-get安装的opencv版本为opencv 2.4.9,命令为

sudo apt-get install python-opencv

如果要安装oepncv3.3,这里我提供编译的思路，我这里用了linux的sh脚本文件，文件名为 buildOpenCV.sh，脚本内容为：

#!/bin/bash
# License: MIT. See license file in root directory
# Copyright(c) JetsonHacks (2017)
cd $HOME
sudo apt-get install -y \
    libglew-dev \
    libtiff5-dev \
    zlib1g-dev \
    libjpeg-dev \
    libpng12-dev \
    libjasper-dev \
    libavcodec-dev \
    libavformat-dev \
    libavutil-dev \
    libpostproc-dev \
    libswscale-dev \
    libeigen3-dev \
    libtbb-dev \
    libgtk2.0-dev \
    cmake \
    pkg-config

Python 2.7

sudo apt-get install -y python-dev python-numpy python-py python-pytest -y

GStreamer support

sudo apt-get install -y libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev

git clone https://github.com/opencv/opencv.git
cd opencv
git checkout -b v3.3.0 3.3.0

This is for the test data

cd $HOME
git clone https://github.com/opencv/opencv_extra.git
cd opencv_extra
git checkout -b v3.3.0 3.3.0

cd $HOME/opencv
mkdir build
cd build

Jetson TX2

cmake
-DCMAKE_BUILD_TYPE=Release
-DCMAKE_INSTALL_PREFIX=/usr
-DBUILD_PNG=OFF
-DBUILD_TIFF=OFF
-DBUILD_TBB=OFF
-DBUILD_JPEG=OFF
-DBUILD_JASPER=OFF
-DBUILD_ZLIB=OFF
-DBUILD_EXAMPLES=ON
-DBUILD_opencv_java=OFF
-DBUILD_opencv_python2=ON
-DBUILD_opencv_python3=ON
-DENABLE_PRECOMPILED_HEADERS=OFF
-DWITH_OPENCL=OFF
-DWITH_OPENMP=OFF
-DWITH_FFMPEG=ON
-DWITH_GSTREAMER=ON
-DWITH_GSTREAMER_0_10=OFF
-DWITH_CUDA=ON
-DWITH_GTK=ON
-DWITH_VTK=OFF
-DWITH_TBB=ON
-DWITH_1394=OFF
-DWITH_OPENEXR=OFF
-DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda-8.0
-DCUDA_ARCH_BIN=6.2
-DCUDA_ARCH_PTX=""
-DINSTALL_C_EXAMPLES=ON
-DINSTALL_TESTS=ON
-DOPENCV_TEST_DATA_PATH=…/opencv_extra/testdata
…/

Consider using all 6 cores; $ sudo nvpmodel -m 2 or $ sudo nvpmodel -m 0

make -j4

这里注意

  -DBUILD_opencv_python2=ON \
  -DBUILD_opencv_python3=ON \

我把opencv的python2,python3的接口都开了，然后赋予执行权限，然后运行：

chmod 777 buildOpenCV.sh
./buildOpenCV.sh

然后就等着它运行完啦，我的平台是tx2，期间没有任何报错，是不是很简单。感谢帮助过我的人

参考文献

[1].buildOpenCVTX2.https://github.com/jetsonhacks/buildOpenCVTX2

转载自：https://blog.csdn.net/w5688414/article/details/78771958/